ReviewsAluminium Master Alloys

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 1/2\-13 - Qty 1

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 1/2\-13 - Qty 25

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 3/8 -16 - Qty 25

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof T Groove Security Nuts Zamak 5 Zinc #10-24 Qty 25

  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • Installed using a special tri groove socket (sold separately).
  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
Check Stock

VIGRUE 80Pcs Sanding Discs Set, 2 Inches Quick Change Discs with 1/4 inch Holder, Surface Conditioning Discs for Die Grinder Surface Prep Grind Polish Burr Rust Paint Removal with Container

  • 15 x Nylon SiC sanding discs (Coarse/ Medium/ Fine).
  • 35 x Aluminium Oxide Discs (36 Grit/ 40 Grit/ 60Grit/ 80Grit/ 120 Grit/ 180Grit/ 240Grit).
  • 25 x Zirconium oxide Discs (60Grit/ 80Grit/ 120Grit/ 180Grit/ 240Grit).
  • Total 80pcs sanding discs all come in a convenient transparent box.
  • 【High Performance】 Nylon SiC (Silicon carbide) discs feature open-mesh 3D structure with superior hardness and brittleness, leading to good elasticity and plasticity, suitable for different shape objects.
  • Aluminium Oxide discs combine quality aluminium oxide sandpaper and strong R-lock shank base.
  • Zirconium Oxide with strong cutting force and long service life, apply for polishing hard metal, such as titanium alloy.
  • 【Extensive Application】 Assorted Girts (from 36 to 240) of 2 inch sanding discs fits various surface such as stainless steel, alloys, iron, non-ferrous materials.
  • conditioning and preconditioning, oil paint removal, rust removal, glue or adhesive removal, self-sharpening, sanding, cleaning, grinding, stripping, deburring, polishing, finishing, etc..
  • 【Quick-change & Steady Design】 With unique safety torque spiral, the connection between sanding disc and holde....
Check Stock

(500pcs) #10-24 Security Break Away Nuts Aluminum Ships FREE in USA by Aspen Fasteners, AFTPR-171070-D

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Barb Drill Bit, Multiple Sizes Tapered Hole Drilling with Center Punch for Metal Plastic Wood Plates

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

uxcell 4Pcs 6063 Seamless Aluminum Round Straight Tubing Tube 1 Feet Length 0.234 Inches ID 0.312 Inches OD

  • The aluminium tube is commonly used for frames, boat building, gardening products, general fabrications and shop fitting,DIY aircrafts or other remote control models..
  • Aluminum Round Tubes are available in alloys 6063 offering better corrosion resistance and weldability than other Aluminum Round Tub.
  • The interior is smooth with no seam and is available in an extruded structural or a drawn seamless aluminum round tube for higher precision applications..
  • It can be easily cut and drilled, and can be welded with the right equipment..
  • Different size aluminum tubing for your needs. Please check it right before purchasing..
Check Stock

(5000pcs) 1/2-13 Security Break Away Nuts Zinc Die Cast Ships Free in USA by Aspen Fasteners, AFTPR-171110-M5

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

(500pcs) 1/2-13 Security Break Away Nuts Zinc Die Cast Ships FREE in USA by Aspen Fasteners, AFTPR-171110-D

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

THINBIT 3 Pack SPT045D5 'S' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock