ReviewsAluminum Automatic Bending Machine

Hanchen Fees for Accessories, Customization and Repaire

  • 【Professional Design】This bag sewing machine has automatic oiling function, which make it convenient, time-saving, higher work efficiency, ensuring smooth running and long service life.
  • Light weight(about 2.92kg/6.44lbs), easy to carry.
  • Work Efficiency: 2 seconds/bag, about 5000 bags/day(speed: 2600 rpm), uniform stitches.
  • Thickness of sewing material: 0.4-6mm/0.02-0.24inches, on both thick and thin material can be used..
  • 【Wear-resistant Material】Semi-enclosed structure, with a certain degree of dust-proof capacity.
  • shell made of aluminum alloy die-casting. All parts are produced in strict accordance with the standard industrial process. After completion, they are subject to carburizing, blackening and other fine finishing. Copper core, copper wire, durable, high efficiency, low noise, low temperature rise..
  • 【Applications】This automatic oil filling bag sewing machine works with many kinds of bags, including express bag, non-woven fabrics, plastic coated bag(rice bag), hard blanket, leather compound bag, greenhouse cotton, geotextiles, paper bag, towel(soft material), leather material, burlap, etc in agricultural, food, pet, animal, chemical and other industries..
  • 【Please Note】Please ONLY use sewing machine oil. You can find it on Amazon ....
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

AMICO MTS-185, 3-in-1 Combo 185-Amp MIG Lift-TIG Stick Arc DC Inverter Welder, Compatible Spool Gun Welding Aluminum: SPG15180.

  • ...adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-185 is designed and manufactured according to the highest production standards. You can use 2 pound and 10 pound spools. The ergonomic design and lightweight model make the machine very easy to carry. It has a variety of safety protection functions: automatic voltage compensation, over-heat protection, over-current protection, over-load protection, short circuit protection, etc..
  • The MTS-185 creates very clear welding wire melted droplets, making it easy to transfer. The fast, precise, and clean arc ignition and arc termination make this machine a reliable and effective tool for industrial manufacturing, car modification, profession....
Check Stock

US Stock M3-M16 Electric Tapping Machine 375rpm 110V Flex Tapping Arm Machine ANSI Full Set Tap Collets Holder Included

  • M16R electric tapping machine has manual, automatic and gap 3 modes for your choice. Automatic mode can control the depth of tapping effectively to realize blind tapping.
  • Tapping angle: Universal. Tapping Capacity Stainless steel/Steel: M3-M16, Aluminum: M3-M16, Working Area Horizontal: 1045mm(41.1inch) Weight: 32KG (70.5lb.) Vertical: 400mm adjustable.
  • Main parts for tapping machine, import servo motor, HD human machine interface, high-precision cantilever bracket, universal head(tapping for vertical/horizontal), import tap collet(standard).
  • Applicable materials: aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
  • 1-year warranty. Free shipping to your door. Standard equipped tap collet size: ANSI standard M3,M4,M5,M6-M8,M10,M12,M14 and M16. 8PCS in total. If you need ISO/JIS or DIN standard collet, please leave a message.
Check Stock

Mophorn YP-9 Manual Bench Top Compact Bender Pipe Bending Machine 7 Dies 1-3inch Metal Fabrication Tube Rod Pipe Bender 44ft Mount Powdercoat Telescoping Handle Maximum 5/8 Thick 1-15/16inch Width

  • . All these are made of reinforced steel for durable use. The bending heads can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. And it can bend different shape of material, such as flat stock, round stock, square stock..
  • Energy-saving Structure: The metal bender adopts a long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Bracelet Metal Stamping Kit- Aluminum and Copper Bracelet Blanks w/ Bracelet Bending Bar for Jewelry Stamping Kit- Metal Stamping Blanks for Zoom Engraving Tool or Ferric Chloride Etching- 19 Pieces

  • COPPER AND ALUMINUM: try three sizes of both copper and aluminum in this bracelet making starter kit (1/4", 3/16", 5/8").
  • 3 SIZES - 19 Pieces: this jewelry stamping kit comes with 19 total pieces to stamp, engrave, or etch to your hearts delight.
  • MULTIPLE USES: Blanks are tested in crafting die cut machine (Maker, Explore Air 2, Silhouette Cameo, Curio, or Brother Scan and Cut machine). Also can be etched using ferric chloride or laser engraver.
  • BENDER BAR: Aluminum bracelet bending tool included to help shape bracelets appropriately to size.
  • INSTRUCTABLES INCLUDED: Instructions for die cut use and ferric chloride acid etching, project ideas, and opportunity for designs are included in packaging.
Check Stock

AmicoPower MTS-185,Multi-function 185-Amp MIG/MAG/Flux-cored/Lift-TIG/Stick Arc DC Inverter Welder,Can weld all metals,Spool gun weld aluminum.

  • ...adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
  • MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
  • MTS-185 is designed and manufactured according to the highest production standards. You can use 2 pound and 10 pound spools. The ergonomic design and lightweight model make the machine very easy to carry. It has a variety of safety protection functions: automatic voltage compensation, over-heat protection, over-current protection, over-load protection, short circuit protection, etc..
  • The MTS-185 creates very clear welding wire melted droplets, making it easy to transfer. The fast, precise, and clean arc ignition and arc termination make this machine a reliable and effective tool for industrial manufacturing, car modification, profession....
Check Stock

Graco SnugRider Elite Infant Car Seat Frame Stroller, Black

  • This Graco stroller turns your car seat into an ultra-portable travel solution and is the only car seat carrier engineered exclusively for Graco seats.
  • Height-adjustable handle for comfortable strolling.
  • Ultra-lightweight aluminum car seat stroller frame is the perfect infant car seat accessory, providing convenience on-the-go.
  • Car seat travel cart works with all Graco infant car seats (including both Classic Connect and Click Connect seats).Care and Maintenance – Never use bleach. To clean stroller frame, use only household soap and warm water.
  • One-hand, standing fold with automatic storage lock, means no bending necessary.
  • Extra-large storage basket with zippered pocket securely holds your travel essentials.
  • All-wheel suspension for a smooth ride on any surface with single front swivel wheels for enhanced maneuverability.
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock