ReviewsAluminum Barrier Foil

uxcell 10mm Aluminum Foil Tape High Temperature Tape for HVAC, Sealing, Patching Hot and Cold Air Ducts Single Sided Adhesive Tape 20m/65ft 2 Rolls

  • Temperature: Short Term 200℃/ Long Term 80℃.
  • Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Self Adhesive, Directly stretched around the area to be protected, no adhesives needed..
  • Good flame retardant and vapor barrier. Can be stored at any environment without damage, making this aluminum duct tape suit for window-type AC and heaters, vents, and ducting.Double sided conductive, ultra thick aluminum foil, conductive glue, anti-interference for electronic products, and wire harness wrapping has a better effect.
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • designed to easily seal HVAC Air Ducts as well as another other Hot or Cold Intakes..
Check Stock

XFasten Aluminum Foil Reflective Duct Tape, 3.6 mil, 2 Inches x 55 Yards, Heavy-Duty HVAC Aluminum Metal Duct Tape for Metal Pipes, Air Vents, Furnace, and AC Units

  • Industrial-grade Aluminum Reflective Foil Tape equipped with high-heat capacity epoxy resin and quick-release silicone adhesive liner. Withstands extreme humidity and temperature from -30°C to 180°C..
  • This Metallic Furnace Duct Tape for HVAC is ideal for sealing hot and chilly air ducts, repairing metal seams and insulating aluminum duct pipes..
  • Increases temperature efficiency, making this dryer foil tape ideal for insulation, heat sinks, AC-units, heaters and vents. Heavy-duty performance against flame, moisture, weather, corrosion and rusting..
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • Excellent flame retardant and vapor barrier. Can be stored at any environment without degrading, making this aluminum duct tape ideal for window type AC and heaters, vents and ducting..
Check Stock

XFasten Aluminum Foil Reflective Duct Tape, 3.6 mil, 1 Inches x 55 Yards, 3-Pack, Heavy-Duty HVAC Aluminum Metal Duct Tape for Metal Pipes, Air Vents, Furnace, and AC Units

  • Industrial-grade Aluminum Reflective Foil Tape equipped with high-heat capacity epoxy resin and quick-release silicone adhesive liner. Withstands extreme humidity and temperature from -30°C to 180°C..
  • This Metallic Furnace Duct Tape for HVAC is ideal for sealing hot and chilly air ducts, repairing metal seams and insulating aluminum duct pipes..
  • Increases temperature efficiency, making this dryer foil tape ideal for insulation, heat sinks, AC-units, heaters and vents. Heavy-duty performance against flame, moisture, weather, corrosion and rusting..
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • Excellent flame retardant and vapor barrier. Can be stored at any environment without degrading, making this aluminum duct tape ideal for window type AC and heaters, vents and ducting..
Check Stock

US Energy Products 1000sqft (48' x 250') Double Bubble Reflective Foil Insulation Thermal Barrier R8 Vapor Barrier Residential Commercial (One Pack)

  • 1,000 SQUARE FEET PER ROLL: 4ft Wide by 250 feet in length. This gives you 1,000 square feet Double Sided Diamond perforated breathable radiant barrier.
  • HIGHLY REFLECTIVE: Double-sided metailzed aluminum barrier. 99.97% Reflective E Value > Highly reflective to reflect radiant heat rather than absorb it. The Diamond Residential Grade Scrim reinforced barrier cuts easily with utility knife or scissors so you can install it properly with ease..
  • For New Construction or Retrofit: It is non-toxic and does not promote the growth of fungi or bacteria nor does it provide no nesting support for rodent or insects. Works for both new and pre-existing buildings. The material is unaffected by humidity and climate changes so no further maintenance is required upon installation. It is a superior alternative to bulky insulation such as foil-faced bubble wrap..
  • ASTM COMPLIANT Fire Rating: Meets the American Society for Testing and Materials (ASTM) Class 1 Class A fire and smoke safety requirements of most state and local building codes, as well as the breathability standards for building materials. While primarily used for attic rafters and floors, our radiant foil works well for garages, workshops, storage units, barns, warehouses, and even older multi-storied homes th....
Check Stock

US Energy Products 5000 sqft SOLEX NASA Reflective Foam Core 1/4 inch Solid Insulation Barrier DIY Insulation Weatherization Water Proof/Meets Fire Codes/Made in USA

  • ⭐ (1/4 inch) closed cell polyethylene foam sandwiched between pure aluminum on both sides.Heating and cooling costs are about 60% of the average....
  • ⭐ The most effective way to cut these cost is to lower the amount of heat transferred into the home in the summer an out of the home in the winter..
  • ⭐ Our Radiant Barrier/Reflective Insulation SmartSHIELD is made from double-sided 99% aluminum foil, with closed-cell polyethylene foam..
  • ⭐ It provides optimal protection by reflecting up to 97% of radiant energy, in addition to resisting conductive and convective heat transfers..
  • ⭐ Our Radiant Barrier/Reflective Insulation SmartSHIELD is nontoxic and non-carcinogenic and works ideal for hot and cold climates..
Check Stock

Thicker Aluminum Foil Tape 2inch x 50 Feet Foil Thick of 4mil Industrial Grade HVAC Metal Tape Heavy Duty Silver Duct Tape for Sealing& Insulation Ductwork Exhaust Pipe Air Vents AC Dryer Furnace

  • Thicker Metal Tape: Made from high-strength aluminum foil and premium acrylic pressure-sensitive adhesive, this heavy-duty Industrial tape adheres securely to surfaces of most materials, performs well in cold weather conditions, and provides excellent performance and long-lasting durability in wet and demanding environments, it's ideal for sealing rigid fiberglass duct boards and flexible air duct systems..
  • Excellent Performance: High temp flue tape is designed to resist flame, moisture /vapor, dust, odor, some chemicals and smoke transmission. in -20°C to 180°C low and high temperature environment to provide lasting adhesion, not only strong adhesion, but also with fireproof, waterproof, UV resistant, heat resistance, anti-interference, temp -resistant, anti-corrosion, anti-aging, anti-rust, and other properties, suitable for indoor and outdoor..
  • Wide Application: multi-purpose silver foil tape is commonly used for sealing HVAC ductwork, seal and patch hot and cold air ducts and dryer vents, ducting pipe insulation, sealed furnace/stove pipe, repair exhaust piping, fixing hose and metallic copper pipe, stainless steel and plastic joints/seams, aluminum alloy seals, EMI & RFI shielding, making grounding mats, decoration arts & crafts, wrappin....
Check Stock

Radiant Barrier RadiantGUARD Ultima FOIL Insulation Roll 1000 sq ft | 48-inch by 250-feet | U-1000-B | HEAVY DUTY Perforated Foil Radiant Barrier Attic Insulation - Blocks 97% of Heat

  • Lowers utility bills year round. This highly reflective industrial reinforced aluminum foil insulation roll BLOCKs 97% of radiant heat gain and loss &....
  • 1,000 square feet (28 pounds) - 250 linear feet BREATHABLE (perforated) DOUBLE-SIDED aluminum insulation roll - Doesn't trap moisture like foam foil....
  • Industrialized strength perforated radiant barrier attic insulation is tear and puncture proof. Entire roll cuts easily with utility scissors or hack....
  • Non-toxic, non-carcinogenic, fiber free and maintenance free and does not require any special clothing or breathing masks to install unlike spray....
  • Class A / Class 1 (ASTM E-84) highest achievable safety fire rating therefore, meets fire and smoke requirements for most local, state and federal....
Check Stock

US Energy Products Car Insulation Kit - 4' x 20' Roll (80 Sqft) Sound Deadener & Heat Barrier Mat - Automotive Lightweight Thermal Insulation (Includes Tape, Razor and Squeegee)

  • Kit Includes: 4ft x 20ft (1/4 Thick) Double Sided Foil Foam Insulation / 20ft Foil Tape / Razor / Squeegee.
  • RADIANT BARRIER - extremely effective, reflect 97% of radiant energy, perfect radiant barrier..
  • VAPOR BARRIER - Unaffected by humidity and moisture, mold resistant , can be used outdoor/indoor. / SOUND BARRIER - excellent soundproofing material..
  • SUPREME QUALITY - 7mm closed cell polyethylene FOAM (1/4 inch thick) (not a bubbles) sandwiched between Radiant Barrier on both sides. Easy to install, easy to cut and easy to clean, Strong but lightweight..
Check Stock

Radiant Barrier - RadiantGUARD Ultima FOIL Vapor Barrier HEAVY GRADE 500 sq ft roll | 48-inch by 125-feet | U-500-VB | Reflective Aluminum Radiant Barrier Foil Insulation Blocks 97% Heat

  • 500 SQUARE FEET ROLL (15 pounds): 125 linear feet water proof VAPOR BARRIER (solid) DOUBLE-SIDED pure aluminum foil certified radiant barrier....
  • VAPOR BARRIER (SOLID): Designed to block moisture vapor from passing through. Ideal wrap for basement, crawl space, behind drywall, in sauna, hot tub,....
  • INDUSTRIALIZED COMMERCIAL GRADE: Is TEAR & PUNCTURE PROOF yet cuts easily with utility scissors or hack saw. Reflects 97% of the radiant heat.
  • FIRE RATING: Class A / Class 1 (ASTM E-84) - Meets fire and smoke requirements for most local, state and federal building codes.
Check Stock

3000 sqft MWS Nasa Reflective Foam Core 1/8 inch Solid Insulation Barrier

  • 3000 sqft MWS Nasa Reflective Foam Core 1/8 inch Solid Insulation Barrier.
  • Does not provide for nesting of rodents, bugs or birds.
  • Reflective aluminum foil on each side of 5mm (13/64) closed-cell polyethylene foam center.
  • 3000 sqft (3 rolls of 4 feet x 250 feet).
Check Stock

3M Aluminum Foil Tape 3340 2.5 x 50 yd 4.0 mil Silver HVAC Sealing and Patching Hot and Cold Air Ducts Fiberglass Duct Board Insulation Metal Repair

  • VAPOR SEAL TAPE: 2. 0 mil aluminum foil backing (4. 0 mil total thickness) with a strong, pressure sensitive acrylic adhesive is ideal as a vapor seal tape for duct closure..
  • HOT AND COLD TEMPERATURES: Combination of a foil backing and acrylic adhesive gives this tape a superb operational temperature range of -40F-300F (-40C-149C)..
  • EASY RELEASING LINER: Poly coated Kraft paper liner protects the adhesive and keeps the tape ready for use..
  • LONG LASTING: The foil backing serves as an excellent barrier against moisture, dust and many chemicals - making it strong, durable and long-lasting..
  • APPLICATIONS: Heating Ventilation Air Conditioning (HVAC), duct closure, vapor seal on reinforced fiberglass duct board, rigid fiber glass duct board, flexible air ducts and air connectors..
Check Stock