ReviewsAluminum Bumper

JDM Bumper Quick Release Front Rear Bumper Fasteners Kit for Car Bumpers Trunk Fender Hatch Lids,Black

Package Includes: Black Bumper Quick Release Tabs x 4.
O-Rings x 2, which are sufficient to meet your daily use and replacement needs..
Features:Our JDM quick bumper fasteners can help you solve the problem of easily re-fixing the car bumper after it falls off.
it supports quick, easy and frequent disassembly of the front bumper and rear bumper.
of course, it is also an excellent embodiment of your fashion style..
Reliable Material: Our bumper quick release buckle is made of aluminum, sturdy and solid, its hardness and strength bring good stability in use.
The O-shaped ring is made of rubber, not easy to break and has a long service life.
These reliable materials can be applied for a long time..
Easy to Install: Our bumper quick release kit is simple to use, first of all, you need to take out the bumper quick release buckle and the O-shaped ring, and then you need to lift the bumper to the proper position and mark the hole positions on the mudguard while considering the elasticity of the rubber ring..
Application: Universal fit for all vehicles,Perfect fit front bumpers, rear bumpers, trunk/hatch lids, etc..

Check Stock

iJDMTOY No Drill Front Bumper Tow Hook License Plate Mounting Bracket Adapter Kit Compatible With Nissan 370Z Juke Rogue Infiniti FX JX QX G37 Q60

Compatible with 2009-2012 Pre-LCI Nissan 370Z or All Nissan 370Z w/ Nismo Package/Bumper, 2011-2017 Nissan Juke, 2014-2016 Nissan Rogue (X-Trail), 2009-2017 Infiniti FX35 FX37 FX50 QX70, 2013-up Infiniti JX35 QX60, 2016-up Infiniti Q60, 2011-2014 Infiniti G37 Q60 Sport Coupe w/ the bumper shown in the gallery picture.
No modification required! The billet aluminum rod screws into the original towbar opening to support the number plate instead of drilling into the bumper.
Unlike the "copycats" on the market, our license plate relocation panel is made of black powder coated steel instead of aluminum.
much stronger, more durable and better prevents the license plate from spinning due to high-speed driving.
Panel also comes with 8 different mounting locations to best keep the license plate from blocking intake vents / lights / parking sensors with angle adjustment for plates to follow the curve of the bumper.

Check Stock

Authority Motorsport Rear Diffuser 6 Piece Kit V1 Compatible with Chrysler 300 2015-2021

Authority Motorsport 6 Piece Kit Including:.
4 Rear Diffuser Fins and 2 Rear Side Wings that attach to your stock bumper.
Please note: Holes need to be drilled into the rear lower bumper for installation.
Fabricated using Aluminum Compound for added strength and weight saving.. All required hardware is Stainless Steel painted black for durability and is Included..
Important Notice: This is not a 1 piece bumper. This is a multiple parts custom made diffuser specifically designed and produced by Authority Motorsport LLC in Miami Florida to fit this specific vehicle with the pictured bumper...

Check Stock

Eastcoo Slim Metal Bumper Case Compatible with iPhone 12 12 Pro, Metal Bumper Cover with Soft TPU Inner [No Signal Interference][Support Wireless Charging] Compatible for iPhone 12 12 Pro, Black

...ing improves grip, while scuff and ink marks are easy to clean. The soft TPU joint inner on the frame protects your iPhone's edges from scratches makes the case easy to put on or take off..
Pragmatic Design&Dual Structure: This bumper case adopts a dual structure, aluminum-alloy frame with TPU inner bumper. The aluminum aspect of the bumper top-grade anodized technism, tough yet flexible, holds shape without loosening after bending or stretching, also scratch resistant..
Bid Farewell Scratching: The front has four raised corners surround preventing anything from touching the screen from lying flat, and the same for the rear camera. effectively protect your camera lens and screen from scratches caused by rubbing against flat surfaces..
Comprehensive Protection: Strongly recommends pairing with the Easctoo Screen Protector, just in case the face-down falling on a pointed object or highly-uneven surface. Our case is extremely durable and moderately flexible can bend without breaking especially during installation and removal, unlike traditional polycarbonate or TPU cases..

Check Stock

Authority Motorsport Dodge Challenger Rear Diffuser Kit 5 Piece V1 2015-2021,Satin Black

Holes need to be made into the rear lower bumper for installation, as well as simple measurements need to be taken to ensure the right position..
5 Rear Diffuser Fins that attach to your stock bumper. Please note: bumper is not included..
Notice: This is not a 1 piece bumper. This is a multiple parts custom made diffuser specifically designed and produced by Authority Motorsport LLC in Miami Florida to fit this specific vehicle..
Custom made using an Aluminum Compound material for Stiffness and Weight Saving. GOLD Trim added later the installation, parts come all black..

Check Stock

Drfeify RC Car Front Bumper Aluminium Alloy RC Front Bumper Guard Accessories Compatible with RGT 1/10 Truck Overland Rock Cruiser EX86100 Silver

【High quality】: The front bumper is made of high-quality aluminum alloy material, which is strong, durable and has a long service life..
【Perfect accessories】: The front bumper has a novel appearance and exquisite workmanship. It is the perfect accessory for model cars..
【High simulation】: Installing this front bumper can make your car look more realistic and cooler..
【Lightweight】: The front bumper is light-weight, does not burden your remote control car, and is easy to install and remove..
【Applies to】: This front bumper is specifically designed for the RGT 1/10 truck land rock cruiser EX86100..

Check Stock

Authority Motorsport Rear Diffuser 5 Piece Kit V1 Compatible with Infiniti G35 2003, 2004, 2005, 2006 and 2007

Authority Motorsport Original Rear Diffuser Made in the USA *** Beware of the Chinese Copy ***.
Notice: The bumper itself is not included. This is not a 1 piece bumper. This is a multiple parts custom made diffuser specifically designed and produced by Authority Motorsport LLC in Miami Florida to fit this specific vehicle..
5 Rear Diffuser Fins that attach to your stock bumper, please note: bumper not included..
Infiniti G35 Coupe Rear Diffuser 5 Piece Kit V1..
Constructed using an Aluminum Compound material for Stiffness and Weight Saving. This material is widely used in the industry..

Check Stock

Authority Motorsport Original Rear Diffuser Kit V1 5 Piece 2014 2015 Compatible with The 5th Gen Camaro - Made in The USA

Original Part Made in the USA by Authority Motorsport *** Beware of the Chinese Copy ***.
Rear Diffuser Kit V1 5 Piece Compatible with Camaro 5th Gen2014 2015.
Notice: Includes 5 individual Fins that attach directly to your stock bumper. The bumper itself is not included. Hardware and Instructions are included..
Please make sure your rear bumper looks exactly like the one pictured before ordering. *** The bumper itself is not included ***.

Check Stock

Rear Diffuser Kit V1 Compatible with Dodge Challenger 2015-2021

Please note: You will have to open holes into the lower rear bumper for installation and take simple measurements..
4 Rear Diffuser Fins that attach to your stock bumper.
Notice: This is not a 1 piece bumper. This is a multiple parts custom made diffuser specifically designed and produced by Authority Motorsport LLC in Miami Florida to fit this specific vehicle..
Constructed using an Aluminum Compound material for Stiffness and Weight Saving.
Item weights 2 Lbs and it is 7 inches long.

Check Stock

INJORA RC Rear Bumper with RC Metal Trailer Hitch for 1/10 TRX-4 TRX4 Car

The rear bumper made of high quality metal aluminum, which is durable, firm yet light..
The rear bumpers would benefit for protect your RC cars body and chassis..
The rear bumper comes with Tow Trailer Drop Hitch Receiver, looks more stylish and perfect..
The rear bumper is a great attractive upgrade part suitable for 1/10 TRX-4 TRX4 Car..

Check Stock

Dual Position Front License Plate Relocation Holder Kit Compatible with 2015-2017 2018 Subaru WRX&STi

Feature Made with high quality aluminum special, Powder coated no drill or modification required..
License plate relocation kit is compatible with 2015-2017 2018 Subaru WRX&STi.
Material: Aluminum Color: Black. Overall size of plate:7-3/4''x5-3/8''. IMPORTANT NOTE: This item is aftermarket replacement,not OEM..
You can directly bolt on this bracket/adapter to your vehicle's front bumper tow hole and have the license plate mount there instead of drilling and damaging the vehicle's front bumper..
Includes all necessary hardware as picture shown for proper installation and is adjustable vertically and horizontally..

Check Stock