ReviewsAluminum Cast Coil

Holley 241-91 Aluminum Satin Black LS Chevy Valve Covers LS1 LS2 LS3 LS6 LS7 LSX

• Angled coil mounts deliver a smooth clean look.
• Retain the high-tech look and performance of “coil on cover”.
• Eliminates unsightly OE style coil brackets.
• Also available in Natural Cast & Polished.

-2- Ignite Pro Series 3000W Titanium 4

• 4" Super Tweeters, 1.5" High Temperature Kapton Voice Coil.
• Dimond Chrome Cutting Finish, Die Cast Aluminum Frame.
• Peak Power Handling- 1500W(Per Tweeter)/ RMS Power Handling: 450W (Per Tweeter).
• Impedance: 8 Ohms / Tweeter Size: 4" Square.
• Ferro Rluid Enhanced Voice Coil/ Sensitivity: 109 dB/ Frequency Response: 3k-22kHz.

Memphis Audio MOJO615D4 MOJO 2200 Watt RMS 15 Dual 4 Ohm Subwoofer

• Features: Vented cast aluminum basket, 4-layer CCAW 3.5" voice coil, 235oz magnet, Fiberglass reinforced cone, Double stitched rubber surround,....
• Specifications: 2200W RMS, 4400W Maximum Power, 85dB Sensitivity, 4-Ohm Impedance, 15 Inch Diameter, Dual Voice Coil, and 9.44" Mounting Depth.

Rockville HT120 2 360w Car/Pro Aluminum Horn Titanium Tweeter w/ 2 Voice Coil Black

• What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual.
• Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver.
• RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil.
• Ferro Fluid Enhanced Voice Coil Cooling, Impedance: 8 Ohms, Frequency Response: 800Hz - 20kHz, We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave, Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving.
• Horn Dimensions: 6.2” x 6.2” x 5.1” (158 x 158 x 130 mm), Throat Diameter: 2", Overall Depth: 7.6” (193 mm), Cutout Diameter: 5.79”, Mounting Depth: 7.36”, Extremely loud and clear highs with an amazing frequency response that can even play some mids, Shallow Mounting Depth.

Holley - 241-298 Valve Cover Adapter Plates - Pair

• Available in three finishes, Natural Cast, Black Painted, and Polished Finish.
• Includes all mounting hardware that allows mounting of three different generations of coil packs.

Power Acoustik BAMF-122 Bumper-122 Subwoofer 3500 Watts 12 inches Dual Suspension,Black

• 3" dual 2Ω, 4-layer voice-coil configuration with direct-connect wire increases power handling.
• Overcompensating motor structure for increased magnetic strength.
• 12mm T-yoke & top plate improve low-frequency dynamics.
• Vented T-yoke & frame reduce voice-coil heat buildup.
• Nonmagnetic, nonresonant die-cast aluminum frame.

Power Acoustik BAMF‐152 BAMF Series Subwoofer 15 3,800 Watts max Dual 2Ω

• 3" dual 2Ω, 4-layer voice-coil with direct-connect wire increases power handling.
• Overcompensating motor structure for increased magnetic strength.
• 12mm T-yoke & top plate improve low-frequency dynamics.
• Vented T-yoke & frame reduce voice-coil heat buildup.
• Nonmagnetic, nonresonant die-cast aluminum frame.

2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78

• ...nches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor.
• 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth.

WULF 2.5' Front 2' Rear Leveling Lift Kit compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension

• Compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension.
• FRONT: 2.5" Lift Solid Aluminum Coil Spring Spacers.
• REAR: 2" Lift Ductile Cast Steel Angled Blocks, (4) Zinc Coated U-bolts, Hardware Included.
• NOTE: 2WD models only. Requires coil spring suspension. Strut Spacers are not a 1:1 ratio regarding physical thickness to the amount of lift, they will lift the advertised amount Please see the description for full details, or contact us for assistance.
• Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

• High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
• Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
• Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
• Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
• Inputs: Custom 5-way bi-wire tool-less binding posts.
• Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
• Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
• Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
• Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".

Memphis Audio M71212 M7 Series 12 inch Component Subwoofer