ReviewsAluminum Composite Pipe

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

RIDGID 31115 Model 848 Aluminum Straight Pipe Wrench, 48-inch Plumbing Wrench

  • Professional strength aluminum pipe wrench is nearly 40% lighter than comparable same-size heavy-duty models with the same durability and ease of use.
  • Sturdy I-beam handle with full floating forged hook jaw for superior gripping and quick adjustments.
  • Aluminum pipe wrench features a non-stick adjustment nut, and self-cleaning threads with easily replaceable hook jaw, heel jaw and spring assembly.
  • Straight pipe wrench is suitable for all types of pipe work.
  • 48-inch (1200 mm) pipe wrenches are ideal for pipe diameters of 3 inch (80 mm) to 5 inch (125 mm) with a capacity of up to 6 inches (150 mm).
Check Stock

60mm Preheater Hose Air Inlet Pipe,Air Duct Drain Hose Car Heater Duct Vent Warm Air Outlet for 2000/6000 W Air Heaters, Aluminum Foil Heater Duct Pipe Car Air Ducting Hose/1pc

  • 【Aluminum Foil Heater Duct】- Made of high quality aluminum foil material, durable and practical to use. Anti-shock, corrosion, flame resistant, Car Heater Pipe Auto Aluminum Foil Flexible Air Ducting..
  • 【Hot & Cold Air Ducting Hose, Car Warm Heater Duct Pipe Air Ducting Replacement】- Hot & cold air ducting,for Domestic, for Planer etc. Perfect to replacement the old or broken Heater Duct. Vent Warm Air Outlet Aluminum Foil Replacement Hose Extendable Pipe..
  • 【Retractable Car Air Heater Duct Pipe】- Extendable 60, 75 mm diameter air inlet pipe can be extendable up to 800 mm.42mm extendable:42 mm diameter air inlet pipe can be extendable up to 1000 mm..
  • 【Three diameters】-Three diameters, suitable for most outlet hose to meet your needs..
  • 【Occasions】- Mainly used for 2000 W or 6000 W air heaters.Hot and cold, air ducting for heater, etc..
Check Stock

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

Bravex Tube Cutter 1/4\ to 2\

  • [High-quality Blade] This pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [100% Money-Back Guarantee] If you're not satisfied, return back to us, no-hassle refund or product replacement..
Check Stock

RIDGID 47057 Model 812 Aluminum Straight Pipe Wrench, 12-inch Plumbing Wrench , Small , Silver

  • Professional strength, lightweight aluminum wrench is nearly 40% lighter than a same-size RIDGID heavy-duty model with the same durability and ease of use.
  • I-beam handle with full floating forged hook jaw for superior gripping and quick adjustments.
  • Features self-cleaning threads with easily replaceable hook jaw, heel jaw, and spring assembly.
  • Aluminum pipe wrench includes special hook and heel jaws for plastic coated pipe.
  • 12-inch (300 mm) pipe wrenches are ideal for pipe diameters of 1/2 inch (13 mm) to 1-1/2 inch (40 mm) with a pipe capacity of up to 2 inches (50 mm).
Check Stock

MAXPOWER 14-Inch Pipe Wrench, 40% Lighter Aluminum Plumbing Wrench, Heavy Duty Straight Pipe Wrenches Jaw Max Capacity 2 inch

  • 14-inch Aluminum straight pipe wrench, clamping capacity Up to 2 inch, Overall length 350mm.
  • Nearly 40% lighter than traditional iron pipe wrench of same size, this aluminum pipe wrench offers a great durability, and lightweight for easy transport.
  • This plumber pipe wrench is suitable for tightening and loosening threaded pipes of all forms, easy for use in residential plumbing works and repair.
  • Straight pipe wrench has serrated jaw and adjustable nut, covered self-cleaning threads, replaceable hook jaw and spring assembly, Do Not recommend to use this wrench as hammer.
  • I-beam handle for powerfully gripping and quick adjustments.
  • MAXPOWER pipe wrench, maximum torque exceeds ANSI standards.
Check Stock

DURATECH Strap Wrench 18\ Handle, Adjustable Nylon Strap Pipe Wrench, Oil Filter Strap Opener Wrench

  • The handle length is 18 inches, the belt length is 32 inches, the width is 1.8 inches, and the whole product weighs 0.86kg..
  • Features a lightweight aluminum I-beam handle and a strong, woven polypropylene strap that grips tightly without scratching or damaging surface..
  • 2-ply double thick strap reduces stretching and tearing, he nylon belt wrench has a non-slip design on the head, and the nylon belt is made of high-quality, durable composite material for improved efficiency..
  • The strap wrench has a simple structure and is easy to assemble and use. Compared with ordinary pipe wrenches, strap wrench works in tight confined areas and are great for plastic or metal pipes, fittings, filters, jar openers, shafts, and irregular shapes..
  • Completely adjustable strap wrench. You will get a strap wrench heavy duty tool which is tough, High-quality anti-breaking nylon belt provides excellent grip..
Check Stock