ReviewsAluminum Coupling

uxcell 6.35mm to 8mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,5pcs

  • Zero backlash. One-piece metallic spring coupling. For little torque shaft connect..
  • Absorption of parallel, angular misalignments and shaft end-play by spring action..
  • Widely used in drive systems for encoders, instrumentation,lead screws, small pumps, feed rollers and anywhere light to medium duty, torsionally flexible coupling is required..
Check Stock

VEVOR Commercial Ice Maker Machine, 120-130LBS/24H with 33LBS Bin and Electric Water Drain Pump, Stainless Steel Construction, Auto Operation, Include Water Filter 2 Scoops and Connection Hose

  • Male Camlock Coupling - Aluminum 2 inch (O.D. - 2.480) - Type "E" Shank.
  • Female Camlock Coupling - Aluminum 2 inch (I.D. - 2.519) - Type "C" Shank.
Check Stock

Rexnord Falk Steelflex 0775806 1040T10 Grid Coupling Cover

  • The popular T10 design features a two piece horizontally split cast aluminum cover that provides for the easiest installation and servicing..
  • Five year warranty on Falk Steelflex Couplings when lubricated with Falk LTG Grease and used with Falk hubs, covers, and grids..
  • Size 1040T horizontally-split cover for T10 Series close-coupled double-flexing coupling..
  • When lubricated with Falk Long Term Grease (LTG) a Falk Steelflex Coupling does not require re-lubrication for five years..
Check Stock

Rctruckfactory New Aluminum Tamiya 1/14 R/C Semi Truck 3 Axles Dolly Trailer 5th Wheel Coupler

  • Full Aluminum Custom made Tamiya1/14 scale R/C Semi Tractor Trailer Dolly with 3 axles & 5th wheel coupling.
  • about 26.5 inch long, 4.5 inch height and 7.25 inch wide.
  • it have all aluminum rims, aluminum fifth wheel, aluminum frame, aluminum support leg and aluminum rear bumper, you can use the same rear bumper red or orange lens from Tamiya King Hauler or from other trailer to fit this rear bumperws).
Check Stock

Abbott Rubber PVC Discharge Hose Assembly, Blue, 2 in. Male X Female Cam and Groove, 65 psi Max Pressure, 50 ft. Length, 2 in. ID

  • PVC for corrosion resistance, high strength, and light weight.
  • High-tensile polyester yarn reinforcement for strength and durability.
  • 2" aluminum male cam and groove coupling and 2" female cam coupling for resistance to corrosion and tarnishing.
  • Lightweight hose coils flat for compact storage.
  • Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi.
Check Stock

4in Mecanum Wheel Left Aluminum with TPU Rubber Rollers Industrial Robot Accessories 50mm / 2in Wheel Width with Wheel Coupling

  • 【 Polyurethane TPU Rubber Rollers】TPU rubber rollers are made of high-quality polyurethane TPU material, with good friction and extremely long service life, other parts are made of aluminum, which will not be easily deformed..
  • 【30KG Single Wheel Load】TPU rubber rollers use one bearing at each end for smoother operation and strong load, 45 degree omnidirectional wheel, single wheel load 30KG..
  • 【Allowing Robot All-round Motion】The mecanum wheel allows the robot to achieve all-round motion, not only travel forward and backward, but also side to side, supporting larger loads, with 50mm / 2in wheel width, 100mm / 4.0in diameter..
  • 【Good Rigidity Macanum Wheel & Wheel Coupling】Macanum wheel(left) and wheel coupling included, the main body is stamped from aluminum, which has good rigidity and strong impact resistance..
  • 【Quality Guarantee】Before leaving the factory, this product has been strictly supervised, built to meet standard specification, and strictly follow factory quality control, you can use it with confidence..
Check Stock

Swan Products Element Sprinkler Soaker Hose 25' - New.

  • Series connection with metal easy swivel.
  • The square patterns gets all the corners.
  • Aluminum head and 1 pound metal series connection base.
  • Great for Small yards spot watering and re-seeding.
Check Stock

9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm

  • Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
  • Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stock

VEVOR CNC Router Machine 4030 Engraver Milling Machine with Offline Controller Limit Switches Emergency-stop DIY 3 Axes Cutting Kit for Wood Metal Acrylic MDF 400 x 300 x 100 mm Large Working Area

  • Excellent Motor: This machine is equipped with three 57 stepper motors and a 300W standard spindle motor to ensure a smooth operation. The 400 x 300 x....
  • Rigid Coupling & Ball Screw: Refined rigid coupling is capable to eliminate transmission error. X & Y axis ball screw and nuts can reduce friction and....
  • Redesigned Control Box: This cutting machine has an independent offline controller. You can adjust the XYZ axes and turn on or off the spindle....
  • Aluminum Alloy Board: The aluminum alloy operating panel allows users to wipe the engraving drills with oil or a small amount of water to achieve a....
  • Wide Application: This CNC router machine comes with 20 pcs drill bits. It can be used on many projects and materials, such as plastics, woods, soft....
Check Stock

uxcell 10mm to 12mm Shaft Coupling 30mm Length 25mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder

  • Shaft Usage: 10mm to 12mm / 0.39 to 0.47 inch.
  • Flexibility of coupling shaft removes stress between the motor and driving components..
  • The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..
Check Stock

HDCBMCDDM-US 10mm to 10mm Aluminium Plum Flexible Shaft Coupling D20 L25 Connector Flexible Coupler for 3D PrinterDIY Encoder and Servo Stepped Motor, 2PCS

  • Shaft Usage: 6.35mm to 6.35mm / 0.25 to 0.25 inch.
  • Feature: Spline shaft with coiling clamping.
  • Flexibility of coupling shaft removes stress between the motor and driving components..
  • The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..
Check Stock