ReviewsAluminum Crankshaft

CTCAUTO New Engine Crankshaft Replacement for 1984-1995 for Toyota 4Runner 1976-1985 for Toyota Celica Crankshaft Kit 13711-35050

  • ❤️Compatible: Half Circle Crankshaft is especially designed fit for mini pocket bike 47cc 49cc. The size is about 44mm / 1.7inch, please confirm the original car size before buying..
  • ❤️Easy to Install: Half Circle Crankshaft with easy installation. Based on the original factory specifications, a direct replacement for the old or broken one..
  • ❤️Note： For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life.
  • ❤️High Quality: Engine Crankshaft is made of high quality alloy material, anti-corrosion and high strength for maximum durability. High quality material ensures stable performance and durability..
  • ❤️Excellent Performance: Exquisite workmanship, stable performance and high reliability. High level of accuracy and sensitivity, enhance healthyty of your vehicle..
Check Stock

44mm / 1.7in Crankshaft Assembly Half Circle Crankshaft Engine Parts Replacement Accessories Fit for Mini Pocket Bike 47cc 49cc

  • Keyed Crankshaft 3/4 Inch 3/16 Inch Keyway.
  • This item will not work for GENERATORS or other engines that have a TAPERED Crankshaft.
  • Fitment:for Predator 212cc, For Honda GX200, Go Kart & mini bikes.
Check Stock

For Power stroke 6.7L Front and Rear Crankshaft Seal Installer Remover Master Set Fit for 2011-2021 Ford Super Duty Diesel F-250 F350 F-450 F-550 F-650 F-750 Alt to 303-1509 303-1514 303-1513 303-1510

  • Function -- This is a master tool set that can remove and install all the front and rear crankshaft seals. This professional tool set will absolutely save your time and energy to do the work. They are same or exceed the OEM function and quality..
  • Fitment -- Fits for 2011-2021 Ford Super Duty F-250 F-350 F-450 F550 equipped for Power Stroke Diesel 6.7L and 2016-2021 Ford Super Duty F-650 F-750 equipped for Power Stroke Diesel 6.7L..
  • Include -- 1 * 303-1509 & 303-1509-01 6.7L Front Crankshaft Seal Installer Tool Alt ST-137B. 1 * 303-1510 6.7L Front Crankshaft Seal Remover Alt ST-152. 1 * 303-1514 6.7L Rear Crankshaft Seal Installer Alt ST-138. 1 * 303-1513 6.7L Rear Crankshaft Seal Remover Alt ST-148..
  • Material -- Made of premium heavy-duty hard steel with black coated for rust and corrosion resistance, hardened construction for high strength and impact resistance, this tool is top quality and durability that can serve for a much longer time..
  • Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..
Check Stock

Crankshaft Rear Main Seal and Wear Ring Installer Tool Replacement for Engine 4.5L 6.0L 6.4L Diesel Alt 303-770

  • Replacement for 4.5L Diesel - Low Cab Forward (2006-2009).
  • 6.0L Diesel - F650/750 Super Duty (2005-2007).
  • 6.4L Diesel - F250/350/450/550 Super Duty (2004-2010 & VT365 International).Installation instructions are not included.
  • OEM Replacement part # 303-770. ZTSE4515C ZTSE4515. Universal, used to install the Crankshaft Rear Seal Wear Ring for 4.5L, 6.0L, 6.4L Powerstroke and work in an easier way to save your time and money.
  • Material: All components made of high quality carbon steel, impact resiatant, excellent solid and durable.
  • Universal fits for installation of Crankshaft Rear Seal Wear Ring for 4.5L,6.0L,6.4L Powerstroke .This tool is needed to prevent your seal from leaking.Designed to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4.5L, 6.0L & 6.4L powerstroke engine properly.
  • This rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly. The wear ring is automatically installed to the proper depth.
Check Stock

Farmertec SawKits™ Crankshaft Cylinder Muffler Gasket Compatible with STIHL 066 MS660 650 660 MS650 Chainsaw

  • This listing is about brand new, high quality and Non-original aftermarket replacement parts, 100% tested before sending out..
  • Compatible with STIHL 066 MS660 650 660 MS650 Chainsaw.
  • Package include: 1 X Crankshaft Crank 1 X Crankshaft Grooved Ball Bearing 1 X Crankshaft Grooved Ball Bearing 17x40x14 1 X Oil Seal Set 17X32.9X3.6....
  • FARMERTEC providing high quality aftermarket products, so that you don't need to pay so much money for the genuine one.
  • Note: Pls compare it with your original parts before ordering it to make sure this part will fit.
Check Stock

Assault Racing Products A9724 Big Block Chevy Chrome Triple Groove Long Crankshaft Pulley BBC 396 427 454

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 2, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock

Traxxas 5409 TRX 3.3 Engine Multi-Shaft with Recoil Starter

  • Multi-Shaft allows installation in non-Traxxas vehicles requiring different flywheel offsets.
  • Lightweight reciprocating assembly allows higher revving performance and reduced parts stress.
  • Knife-edged connecting rod reduces drag and turbulence while the channeled design directs oil flow down to the crankshaft.
  • Slide type carburetor provides less restrictive, straight through airflow for more power and improved throttle response.
  • Giant Power tune machined aluminum cooling head promotes even heat distribution for stable engine temps and rock-solid tuning consistency.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • ... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

BGF 66/80cc CrankShaft Crank Long Rod AZE80 / AF80 / JS80 for 2-Stroke Gas Engine Motor Bike Higher Hole

  • Fits Small Block Chevy, Chevy V6 and 4 Cylinder Engines.
  • Fits 1. 255 ID Crank Snout with 3/16 Inch Keyway.
  • This non-marring, aluminum tool rotates the crankshaft the proper way, when the balancer is off.
  • Features 1/2 In. Drive for Use with Breaker Bar or Drive Ratchet.
Check Stock

Crankshaft Turning Socket Chevy S/B, V6, 4-Cylinder

  • Increase torque and horsepower within the operating range.
Check Stock