ReviewsAluminum Crimping Tool

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....

Check Stock

Wire Crimping Tool, Preciva Ratcheting Wire Crimper Tool Crimping Pliers for AWG20-10 Wire, Suitable for Insulated Electrical Wire Connectors

[Color Coded Crimping Jaws]: This Preciva insulated crimping tool comes with three different crimping jaws. Three colors marked. Red, Yellow and Blue, which are coresponding with the connectors. Red crimping jaws for the Red connectors, Bule jaws for the blue connector and Yellow jaws for the yellow connectors..
[Crimping Range AWG20-10/0.5-6mm²]: The crimper tool is suitable for AWG 20-10 wires, and the crimping area range is 0.5-6mm². Multiple applications for your daily use. RED jaw for (0.5-1.5mm² /AWG 20-16), BLUE jaw for (1.5-2.5mm² /AWG 16-14), YELLOW jaw for (4-6mm² /AWG 12-10)..
[Ratcheting Mechanism Design]: This crimper plier Comes with a ratcheting mechanism design for this Insulated terminals crimping tool, labour- saving design. One-hand operation could make a perfect crimp. And you can take less strength..
[Ergonomic Handle Design]: This wire crimping tool equipped with an ergonomic handle, easy to grip and operate. More comfortale to use. Eliminating hand fatigue..
[Widely Applications]: This crimping plier tool are widely used in various household electrical c....

Check Stock

Qjaiune 600Pcs Closed End Crimp Terminal Transparent Protective Closed End Wire Crimp Connector Cap (CE1/ CE2/ CE5)

Reliable material: The core of these closed-end crimp connectors is made of high-quality aluminum, which increases conductivity, is not easy to break during crimping, and can hold the wires well, so that your wires will not fall from these connectors Sliding out in the middle, can provide you with service for a long time..
Insulation design: The shell of these wiring crimping covers is made of nylon, molded, with good insulation, wide application range, safety, durability, reliability, and not easy to deform..
The terminal closed end connector has an internal aluminum tube to ensure a perfect connection between the wires. Simply strip the wire and insert it firmly into the crimper with a crimping tool..
Wide application range: These crimping joint caps can be used in most electrical products, such as electric fans, exhaust, lighting, motors and other household wiring equipment..
The package includes: You will get 30PCS CE2 type crimp cap connectors, the stranded wire range is 16 to 14, enough quantity can meet your different needs..

Check Stock

IWISS SN-PM Wire Crimping Tool & Wire Stripper Set 8 Pieces Quick Changing Die Sets for Heat Shrink Terminals Open Barrel Terminals MC4 terminals Insulated & Non-insulated Connectors

Purpose: SN-PM is an all-in-one wire terminal crimping tool set which includes an SN series compact crimper, 5 quick changing die sets, one wire....
5 Pieces Die Sets: SN-PM wire crimper tool kit includes 5 quick changing die sets work with heat shrink, insulated nylon/vinyl terminals, open....
Wire Stripper: Ideal for copper and aluminum cables from 10-22 AWG. Multifunctional stripper & cutter. Built in shear cutter cuts solid or stranded....
Applications: Wire crimping tool set(8 pieces) ideal for electrical wiring projects in DIY, electronics, RV refit, RC race car, automotive audio,....
Compact Storage: Crimping tools are steel construction with comfortable cushioned grip handles. Supplied in a durable, plastic molded storage case..

Check Stock

DOUBLE CHEN Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2',3/4' and 1' Jaw Copper Pipe Propress Crimper Pressing Pliers,Along with Pipe Cutter

【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.

Check Stock

iCrimp Bench Mounted Wire Rope Swaging Tool for Aluminum Sleeves and Annealed Copper Loops from 3/64 to 1/8-inch

「CAPACITY」3/64, 1/16, 5/64, 3/32, 7/64, 1/8 - inch(1.2-3.5mm)..
「LABOUR-SAVING」This bench-mounted swaging tool has the same 4 cavities as the 15 inch IWS-1608S hand-held swagger, while this one can be solidly fixed on desks, better for frequent crimping works..
「DURABLE」The head part is constructed with one piece high-grade special tool steel, which is rust-corrosion and anti-oxidation. The built-in calibration mechanism ensures long time service..
「COMFORTABLE」Ergonomically designed non-slip grips bring comfortable hand feeling, eliminate the hand fatigue..
「APPLICATION」For aluminum wire rope ferrules, crimping loop sleeve, duplex sleeve, fishing double sleeves, railing fittings. Compatible to sleeves made of aluminum and annealed copper..

Check Stock

Plustool Crimping Tool for Heat Shrink Connectors AWG22-10, Ratcheting Wire Terminal Crimper - Crimping Pliers - Electrical Crimping Tool

❣【Professional Crimping Tool】- This crimping tool works best with Heat Shrink Connectors (AWG22-10). Plustool hand crimper has efficient ratcheting mechanism and professional grade crimping die for proper rock-solid crimps every time. Colored crimping die nests for quick identification. Besides, crimping plier will not damage the heat shrink insulation..
❣【Precision Ratcheting Structure】- Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The tool will self open when the required amount of crimping force has been applied, ensured uniform crimps everytime. The built-in quick release lever allows to open the crimper jaws in any position..
❣【Ergonomic Handle Design】- Plustool crimper tool is designed for ergonomic cushioned handle that provides maximum comfort and reduced hand fatigue. Non-slip design ensures strong grips in any condition and provides maximum leverage, increasing comfort and making the grip self adjusting..
❣【Adjustable Compression Wheel】- A good product depends on exquisite workmanship! Plustool crimping tool....

Check Stock

AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8" 3/16" Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter

Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable..
Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable..
Size: Hydraulic Hand Crimper Tool: Length:approx.12.2 inches, Weight:approx.N.W3.8lb G.W6.6lb. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. A return spring is installed on the handle for easy one-handed operation of the tool.The C-style head makes side entry easier to change the dies..
What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves..

Check Stock

Qibaok Crimping Tool Ratcheting Wire Crimper for Heat Shrink Connectors with 200pcs Heat Shrink Butt Connectors for AWG 20-10

PROFESSIONAL CRIMPING TOOL-This wire crimper tool works best with heat shrink connectors.this hand crimper has efficient ratcheting mechanism and High-precision jaw which is color coded. Ratcheting crimper tool is designed for 20-10AWG..
PRECISE RATCHETING MECHANISM-Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp..
ADJUSTABLE CRIMPING FORCE-The tool has a star wheel that allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project. A designated quick release lever allows to open the crimper jaws in any position..
WIDE APPLICATION-Connectors Crimping Tool Kit can be used for home appliance repair, home circuit repair, vehicle circuit connection, and everything about circuit connection..
PACKAGE INCLUDED-200PCS Heat Shrink Butt Connectors (90PCS×RED.90PCS×BLUE.20PCS×Yellow) and a Crimping Tool For Heat Shrink Connectors. Tubings of different colors with the mark of wire gauge are easy to recognize..

Check Stock

ISPINNER 255pcs 6 Sizes Aluminum Crimping Loop Sleeve Double Barrel Ferrule Assortment Kit for Wire Rope and Cable 1/16' 5/64' 3/32' 1/8' 3/16' 1/4'

HIGH QUALITY - These crimping loop sleeves are made of high quality aluminum, anti-corrosion, sturdy and durable, allow you to use for a long time..
SIZE - In this kit, there are 6 different sizes to meet all your different needs, including 100pcs M1.5, 60pcs M2, 50pcs M2.5, 30pcs M3, 10pcs M5 and 5pcs M6. Total 255pcs packed in a sturdy transparent plastic case..
RELIABLE DESIGN - The double hole aluminum sleeve can develop breaking strength of cable when fixing and transporting general purpose cable..
EASY TO USE - Aluminum crimping loop sleeves are easy to use. Just lock both ends of the wire rope by a hammer or crimping tool. They are great to work on assorted sizes stainless steel cable array for deck railing, properly crimped it will support 200lb load..
WIDE APPLICATION - Usually used for fixing the terminal of wire rope. Widely applied in dog leashes, clothes lines, marine, industrial rigging and wire rope or anything else that require strong cable..

Check Stock

AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16" 1/8" 3/16" 1/4" Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter

Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable..
Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable..
Size: Hydraulic Hand Crimper Tool: Length:approx.12.2 inches, Weight:approx.N.W3.8lb G.W6.6lb. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. A return spring is installed on the handle for easy one-handed operation of the tool.The C-style head makes side entry easier to change the dies..
What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves..

Check Stock