ReviewsAluminum Cutting End Mills

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
Stub length increases the strength of the tool, making it less likely to break in the workpiece.
Four flutes produce a better finish than fewer flutes.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
Used for slotting and peripheral milling.

90Degree Cutting angle Nickel Plated. Screw down insert.
All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
Uses APKT / APHW / APKR_APht / APMT insert (sold separately).

90Degree Cutting angle Nickel Plated. Screw down insert.
All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
Uses APKT / APHW / APKR_APht / APMT insert (sold separately).

2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
General purpose end mill for working on all types of materials.
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.

4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.

4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.

4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.

1.Four flutes produce a better finish than fewer flutes..
3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..

All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..