ReviewsAluminum Heat Sink

Unxuey 6Pcs Set Aluminum Heat Sink South Bridge North Bridge Radiator Cooling Fin Motherboard chip Cooler with Fixing Hole for IC Chipset Module Cooler

  • Made of high quality Aluminum, good thermal conductivity..
  • When you use the aluminum heat sink,it can reduce the risk of hardware failure due to overheating.more safety for your electronic devices..
  • Improve the environment (temperature around the device, as well as the flow rate of the air), reduces the power loss and extend the service life for....
  • Can be applied with other devices for cooling computer, Power Transistor, IC Chips, MOSFET SCR, Southbridge , Northbridge etc..
  • Size: 38mm x 38mm x 10mm (1.49 x 1.49 x 0.39 inch) (L*W*H), please make sure that the size of the heat sink fits that of your component..
Check Stock

Autotek Mean Machine 4000W Mono Amplifier 1-Ohm Stable Car Audio Amp (4 Pack)

  • Minimize Distortion – Highest sound quality connection with quality RCA materials helps prevent interference and distortion in the signal path. Easily tie into OEM audio system that do not offer RCA output to maximize after-market amp power..
  • Built for Powerful Sound – Maximize power efficiency while improving sound quality and minimizing distortion with the high speed Pro-Fi MOSFET components. A high energy power supply delivers power with minimal impact on the electrical system..
  • Class A/B Amplifier – Class A/B topology and low noise preamplifier circuitry produces high quality sound and allows the amplifier to develop high levels of power with minimal distortion..
  • Aluminum Heat Sink – Quick Thermal Dispersion (QTD) technology assures additional mass in the aluminum heat sink keeping the amplifier running cool, with nearly undetectable distortions during normal use when listening to music..
  • High Quality Connections – Nickel plated brass connection with terminals allows secure connections while resisting corrosion. Screw down connectors allow for easy access with hand tool for quick and secure connection..
Check Stock

MJMECHEV8D1 Select Chevy Trucks (2) MOJO 8" Subwoofers Custom Enclosure

  • Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2"..
Check Stock

Derale 13251 Single Pass Aluminum Heat Sink Cooler

  • Aluminum heat sink design produces high heat transfer.
  • External and internal heat dissipating fins.
  • Compact 3 inch diameter to fit most frame rails.
Check Stock

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes heatsinks for cooling down your Raspberry Pi better..
  • The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
  • Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.
Check Stock

Power Acoustik 12" Woofer Dual 4 Ohm 2500W Max

  • Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
  • Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
  • High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
  • Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
  • Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....
Check Stock

Philips LED 417089 Energy Saver Compact Fluorescent T2 Twister (A21 Replacement) Household Light Bulb: 2700-Kelvin, 18-Watt (75-Watt Equivalent), E26 Medium Screw Base, Soft White, 4-Pack

  • ... LED bulbs, SANSI's highly efficient E26 light bulbs can provide 900 lumens using only 9 watts of power, equivalent to 60W incandescent bulbs. Based on 3 hours per day usage, save up to 87% electricity, annual estimated cost $1..
  • Patented ceramic technology: sansi's patented technology replaces the traditional mcpcb aluminum substrate with a non-conductive ceramic heat sink, directly soldering the led chip on the ceramic heat sink, effectively reducing the systematic thermal resistance between the led pn junction and the surface of the heat sink, resulting in faster heat conduction and higher product reliability, making sansi's bulbs perform with higher light efficiency..
  • Flicker-free: adopting high light transmission optical lenses, up to 17 led chips can not only provide you and your family with the light source they need daily but also provide a healthy living or work environment. no flickering, no noise..
  • Safe and reliable: the lamp body is made of special ceramic material, and the flame retardant grade reaches grade v0.
  • the reinforced insulation structure means no risk of electric shock, its safer.
  • the whole shell material reaches the wf2 anti-corrosion grade, which is more reliable and durable.
  • the hollow design is good for heat dissipation..
Check Stock

AUTOSAVER88 2PACK 12W LED Spot Pod Race Lights Off Road Motorcycle Dirt Bike Fog Driving Work Lights 1200LM IP68 Waterproof

  • [Low Power Consumption with High Brightness] - High quality led chips, 12w for each unit, 1200lumen.
  • [Heat Dissipation & Long Life Span] - Conductive aluminum housing quickly direct heat away from led components and release it through numerous large fins of the heat sink.
  • each fin is made with ridges to further increase its surface area for more efficient heat transfer.
  • adjustable heat sink fins even let you angle the heat for other applications.
  • thorough heat dissipation design creates consistently cool operating temperature for the leds and 50,000+ hours lifespan.
  • [Stability and Safety with Strong Housing Material] - Dustproof, shakeproof and waterproof.
  • if you throw it in the water by accident, one silicone string embed between lens and housing, 360 degree protect the bulbs when it in the water.
  • [Safe Focus & Stylish design] - Round design, focuses more light straight ahead of your vehicle and keep the glare away from oncoming traffic.
  • good match your motorcycle, trucks, SUV, and Jeeps.
  • [Universal Application] - It is used on any vehicles, great for car, ATV, SUV, UTE, mining, boat, off-road, trailer, motorcycle, bicycle, excavators, truck, tractor and other heavy equipments.
Check Stock

Tree Leds Marine Led Light Spreader T-Top Deck Light Beam White (Black Set of 2)

  • Light UP Your Way: The LED light bar is equipped with 6 high intensity LEDs of 3W each and 6000K color Temperature, This Spotlight will extend and cover your vision field by 6 Feet each, giving you a high quality lighting experience..
  • High Performance: It hold the marine environment thanks to the die-cast aluminum housing which provides strength and durability. This led lights works with 12 Volts Battery and are IP67 rated waterproof, dust-proof, quake-proof, anti-corrosion for harsh environment..
  • Better Heat Dissipation: In order to get best heat dissipation, our LED light bar uses 1070 aluminum alloy as the cover which can has best heat dissipation and best seal ability for the heat sink. The advanced aluminum design makes it dissipate heat faster and more effectively which extends the lifespan of the light bar beyond 50,000 hours..
  • Adjustable Mounting Hardware: With the included adjustable mounting accessories, the 18W work light can be adjusted about 90 degrees. Making easy to adjust the beam of the spot light..
  • Applications: This Spotlight is compatible with almost all watercraft vessel, Boat, Yacht, Kayak, Pontoon, Raft, Sailboat and more..
Check Stock

Autotek TA1250.2 TA Series 2 Channel Car Audio Amplifier (Black) – Class A/B Amp, 1200 Watt, Bass Boost, Marine Grade Protection Amplifier

  • Minimize Distortion – Highest sound quality connection with quality RCA materials helps prevent interference and distortion in the signal path. Easily tie into OEM audio system that do not offer RCA output to maximize after-market amp power..
  • Built for Powerful Sound – Maximize power efficiency while improving sound quality and minimizing distortion with the high speed Pro-Fi MOSFET components. A high energy power supply delivers power with minimal impact on the electrical system..
  • Class A/B Amplifier – Class A/B topology and low noise preamplifier circuitry produces high quality sound and allows the amplifier to develop high levels of power with minimal distortion..
  • Aluminum Heat Sink – Quick Thermal Dispersion (QTD) technology assures additional mass in the aluminum heat sink keeping the amplifier running cool, with nearly undetectable distortions during normal use when listening to music..
  • High Quality Connections – Nickel plated brass connection with terminals allows secure connections while resisting corrosion. Screw down connectors allow for easy access with hand tool for quick and secure connection..
Check Stock

SANSI LED Grow Light, PPF 96 umol/s LED Full Spectrum, 60W Plant Grow Lamp with Optical Lens for High PPFD, Perfect for Indoor Greenhouse Plants, E26 Base

  • Color rendering index Ra is close to 100, infinitely close to natural light, suitable for every cycle of plant growth, effectively promotes plant growth, and improves crop yield and quality..
  • Patented COC Technology: Chip on Ceramic, SANSI's patented technology replaces the traditional Mcpcb aluminum substrate with a non-conductive ceramic heat sink, and directly solder the LED chip on the ceramic heat sink, effectively reducing the system’s thermal resistance between the LED PN junction and the surface of the heat sink, resulting in faster heat conduction and higher product reliability, making SANSI grow lights have higher light efficiency..
  • Safe and Reliable: The lamp body is made of special ceramic material, and the flame retardant grade reaches V0.
  • the reinforced insulation, no risk of electric shock, is safer.
  • the whole shell material reaches the WF2 anti-corrosion grade, which is more reliable and durable.
  • low IR, less heat radiation, avoiding close distance exposure plant burns..
  • Guarantees: ETL listed & CE certification, quality and safety verified, 5 years warranty..
Check Stock