ReviewsAluminum Intercooler

HPS AST-150 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1.5\ OD, 0.065\ Wall Thickness

  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
Check Stock

aFe 46-20128 BladeRunner 2-1/2\ Intercooler Tube (Non-CARB Compliant)

  • Powder-coated for heat resistance, 3-Piece tube set for perfect fitment and maximum flow, These Hot -Side Tubes direct heated air from the turbos to the intercooler with less restriction.
  • 2.5" Mandrel-Bent Powder-Coated Stainless Steel, for improved flow to intercooler.
  • this tube upgrade combo outflowed the stock tube by 18 percent and resulted in a maximum gain of 9 horsepower and 11 lbs. X ft. of torque as verified by in-house Dyno.
  • These intercooler tubes works with aFe or OE Intercooler, High quality clamps and silicone couplings Included for a perfect fit and strength.
  • All necessary hardware included for a hassle-free installation, This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
  • This item is not for sale in California/Non CARB compliant.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock

Front Mount Intercooler pipe piping Kit for VW PASSAT AUDI A4 B5 1.8T Fmic 96-01

  • **Intercooler Size: 25.25" X 9.50" X 2.25".
  • **Allow more horsepower at the same boost level and even more power at the higher boost level.
  • ** Helps reducing engine air intake temperature.
  • ** Made of high quality durable T-6061 aluminum.
  • ** Aluminum Piping kit including: 2 Pipes, 5 Silicon Hose, 8 clamps.
Check Stock

31x12x3 inch Universal Turbo FMIC Intercooler + 3 inch Piping Kit For Toyota Supra MKIII MK3 7MGTE

  • Intercooler + Piping + Silicon Hose + T-Clamp.
  • Great for Many Turbo Intercooler Applications..
Check Stock

Universal 3' 3Inch 76mm Aluminum Turbo Intercooler Piping U-Pipe Kit Silicone Hose Kit with Coupler and T-Clamps DIY Kit

  • ▲ Pipe OD: 3", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm.
  • ▲ Silver aluminum pipe: total lenth=24" or 600mm.
  • ▲ Silicone hose: Made of high quality Silicone, 3-Ply reinforcement.
  • ▲ T bolt clamp: Made of high quality 301 Stainless steel material.
  • ▲ Universal fitment, depending on the size of your Intercooler.
Check Stock

ACDelco Professional 26261 Molded Turbocharger Intercooler Hose with Clamps

  • Utility for fabricating custom intercooler pipe assemblies or air intake kits.
  • Constructed from 1.5mm thick T6061 aluminum.
Check Stock

FMIC Intercooler Kit For 02-05 Audi A4 B6 1.8T

  • Aluminum Polished Tube & Fin Intake Intercooler FMIC.
  • Fitment: Universal, please check the size..
  • Inlet/Outlet: 3 inch, overall size: 31"x12"x4", core size:23.5"x11"x3.5".
Check Stock

CXRacing Aluminum Y Pipe Dual 3' to 4' Cold Air Twin Turbo Intercooler Piping

  • CXRacing Aluminum Y Pipe, Dual 3" to Single 4", For Air Intake or Intercooler Piping.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo....
Check Stock

Cold Side Intercooler Pipe with Boots Compatible with 2003-2007 Ford 6.0L Powerstroke Diesel

  • Ideal replacement - this intercooler hose matches the fit and function of the original equipment hose.
  • Greater durability - this intercooler hose ends are made of stainless steel instead of the original equipment plastic to better withstand high temperatures.
  • Complete repair solution - this intercooler hose includes new end clamps required to complete installation.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock