ReviewsAluminum Led Heatsink

Philips Automotive Lighting PS24W Ultinon Essential LED Fog Lights 2 Pack

A one-piece design, with integrated electronics and cooling fan in the light base, facilitates easy installation..
Brilliant, precise white beam: Powerful bright white light provides enhanced visibility with no glare to oncoming traffic for increased safety.
Expect long-lasting performance: Dual heat-dissipation mechanism - aluminum heatsink and built-in fan to disperse heat more effectively and....
Do you see a dashboard warning or flickering effect? Some vehicle CANbus systems have specific challenges with LED-based retrofit bulbs. A Philips LED....

Check Stock

H7 LED Headlight Bulbs CAR ROVER 300% Brighter 10000 Lumens 6000K Conversion Kit Pack of 2

300% BRIGHTNESS: Using the newest LED chips(6 SMD and double-sided), each h7 LED headlight bulb can light up to 5000 Lumens, 6000K extremely bright....
ADJUSTABLE MOUNTING DESIGN: Besides the ultra-high brightness, this h7 LED can be 360 degree adjusted and comes with removable adapter, which means....
STRONG HEAT DISSIPATION: The h7 LED bulb was built-in cooling fan and made of aviation aluminum lamp body, which keep the light get a better....
EASY INSTALLATION: PLUG-N-PLAY. The heatsink part only has 20.2 mm length, fit for 95% vehicles. After installation, there's enough space for the bulb....
LONGER LIFESPAN: Last more than 30,000 hours. Works underwater! Rainproof driver, housing, and fan works even in extreme situations. Note: The plugs....

Check Stock

NVIDIA Jetson AGX Orin Developer Kit

【Fully Compatiblility】 This Aluminium Heatsink fully compatible with Jetson Xavier NX Module..
【Essential for High-performance Computing】 Keeps module temperatures low to avoid overheating and throttling..
【Effective Thermal Management】 Full Aluminum heatsink with fan..
【Easy to Install】 Mounting bracket & screws included..
【Easy to Carry】 This Aluminium Heatsink has a small size with dimensions: 58mm x 38mm x 18mm..

Check Stock

7 LED Headlights Hi/Lo Beam DRL Lamps + 4inch LED Fog Light Combo for Kenworth T2000 1998-2010 Pack of 4

7inch LED Light: All-in-one design, high beam / low beam / DRL daytime running lights all in one light. 50W Per Piece Low Beam w/ Projector, 75W Per....
7inch LED Light: Plug and Play - No splicing, no wiring, just ready to use. Equipped with anti-flicker Unit w/ Harness H4 / H13 Adapter. Finish....
4inch LED Light: 60W/Set, 6000LM/Set, Dimensions: 4.0 inch, Lens: 6pcs*5W LEDS, Colour: 6000K, Light: Fog Light & DRL: White.
Energy Saver 60% Lower Consumption, Long Lifespan. Optimized heatsink design.
Waterproof, Dustproof, Anti-explosion. Solid aluminum body can highly....
Packing include: ▲2 x 7 inch LED headlights ▲2 x 4 inch LED headlight ▲2 x H4 to H13 Adapters ▲2 x LED Decoder .US Stock, Fast free shipping.....

Check Stock

GeeekPi Raspberry Pi 4 Fan Heasink, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 4B/3B/3B+ (B Plus)

It's fit for Raspberry Pi 4B and Raspberry Pi 3B+.
It's compatible with most of cases in the market.
Use CNC Machining manufacturing technology for Aluminum heatsink.
With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation.
The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board.
Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink For Pi 3B+, 2x Thermal Tapes for Pi 3B+,2x Thermal Tapes for Pi 4B.

Check Stock

PS5 NVMe Heatsink,M.2 2280 Cooler for The Playstation 5 Internal (Black)

Specially designed for PlayStation 5 Upgrade M.2 NVME Disk heatsink.
Aluminum alloy: high performance a solid aluminum heatsink..
【High-Quality CNC】- Aluminum alloy, silver plating , anodic oxidation surface treatment.
Greatly increase the heat dissipation area of M.2 storage disk, with 10°C - 30°C cooling effect..
Comes with thermal pad and installation guide..
Classic and practical cooling line Offers a steady and effective cooling solution for the PS5..

Check Stock

GENSSI 80W LED bulbs Compatible With Polaris OEM ATV 27W Low Beam Headlight Bulb 4030059 Modify (Pack of 2)

MODIFICATION NEEDED to drill out the inner hole of the light housing for fitment.
Replacement for OEM Part Numbers: 4030059.
Brightness will vary depending on housing of your vehicle.
You are changing these because they are LED and last longer.
22x 2835 LED Chips provide (800-900 Lumens total output).
Front Projector Lens with aluminum heatsink body for long life.

Check Stock

KCCCT LED Parking Lot Lights 150W Outdoor LED Shoebox Pole Lights 20400LM 5000K Commercial Area Road Lighting IP65 100-277Vac LED Street Commercial Light ETL&DLC Listed (Slip Fit Mount,No Photocell)

...nk design.Ideal for outdoor applications such as flood light, security light, post light, street lights,area lights, parking lot light..
☀EASY DIY INSTALLATION & UPGRADE: KCCCT LED area pole lights 21.1''x12.4''x2.8'', easy to install the parking lot lighting. High Power Factor 003e0.9, Low THD Driver.100%die-cast aluminum gasketed enclosure.Simple black appearance, surface anodized, without fading and corrosion.Anti-shock,anti-moisture,no glare,no strobe light,protecting your eyes..
☀DLC/ETL & LONG LASTING IP65 Waterproof for all weather conditions,protective powder coating for lasting appearence.The Shoebox parking lot lights simply and low cost maintenance. LED area light has a 50,000 hour life span, which is approximately 14 years!10 times longer than traditional incandescent light, no bulb needed.Parking lot Lights eligible for participating in state and nation wide rebate programs..
☀LIFETIME WARRANTY &QUALITY AFTER-SALES SERVICE KCCCT pole lights fixture is certified by ETL,Design Lights Consortium(DLC) Approved LED Lighting, which ensure better quality, safety and reliability.Have LED technical questions or need design advice, Feel free to call or email us any time. Designed, Supported, and Engineered in Los Angeles.

Check Stock

Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..

Check Stock

SABRENT M.2 NVMe Heatsink for The PS5 Console (SB-PSHS)

DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..

Check Stock

Antec CPU Cooler, C400 120mm Blue LED CPU Cooler Fan for Intel LGA 775/1150//1151/1155/1156/1366/2011/2066 & AMD Socket

Straight Touch Technology - 8 mm Thick Copper Cold plate.
High static pressure LED fan - quiet 120 mm blue LED fan (Max 77 CFM).
Unique heatsink design - two-tiered fin structure dissipates heat efficiently, while aluminum oxide coating prevents oxidation.
Broad socket compatibility - compatibility with the newest Intel and AMD platforms, and the Push-Pin mounting system and included gold thermal paste make for a fast, simple installation.

Check Stock