ReviewsAluminum Led Pcb

Auxbeam H3 Led Bulbs, H3 Led Conversion Kit 50W 8000 Lumens 6500K CSP LED Chip Fog Light F-B1 Series, Pack of 2

  • 3X Brighter Than Halogen: AUXBEAM B1 series, Upgraded CSP Led light source with 360° illumination, no dark spots or shadowed areas, standard 6500K xenon white, producing 8000lm/set (4000lm/bulb).
  • SUPER BRIGHT & SAFER: 360° illumination equips 6pcs led chips each side. 0.04 inch ultrathin aluminum substrate design light beam more focus, engineering beam pattern throw light on road evenly at appropriate angle without foggy vision, reflect road paints/ signs better to show clearer road situation.
  • OPTIMAL HEAT DISSIPATION: Improve the original heat dissipation area, more accurate and meticulous heat dissipation surface cutting tech. Connect the bottom 12000r/min turbo fan, aviation 6063 aluminum profile housing, heat dissipation performance greatly improved, extend to 50000 hours lifespan. IP 68 waterproof.
  • EASY INSTALLION: Plug and Play, less than 10 minutes installation. Original car interface and chuck design, apply the same length and position as the halogen bulb, no more modification on bulb housing or cover, Ultra precise design perfectly replaces your halogen bulb.
  • Technical Guarantee: H3 LED bulbs built-in constant current CPU, instant full brightness without start-up relay. Upgraded PCB board enhance internal driver stability, fitment rate up of 9....
Check Stock

Cherry MX Brown Keyswitch (10 pack) – MX1AG1NN | Plate Mounted | Tactile Switch |

  • This link is only the shaft and switches for mechanical keyboard,no keyboard and switch tester included..
  • Pls note: This switches can only be used with smd led PCB keyboard,such as GK61 GK64 mechanical edition..
  • This switch can’t replace with optical switches.It can’t replace with the keyboard whose 2 pin 4 pin switch leds.It can only use with SMD leds PCB.
  • 2 pin 4 pin switch led can’t be used directly with this switches,such as 2x3x4 and 3mm and 1.8mm leds.
  • SMD switches uses together with SMD RGB PCB,the effect is much better than normal switches.
  • These switches can’t be compatible with Outemu hotswap socket and can’t interchage Outemu switches keyboard since the pin is thicker than Outemu switches.
  • It’s not compatible with outemu switches hotswap keyboard and low profile switches,optical switches keyboard..
Check Stock

Maxim 52008PC Spec ADA & JA8 Compliant Energy Star Acrylic LED Bath Vanity Bar Wall Mount, 1-Light 32 Watt, 2'H x 48'W, Polished Chrome

  • Back Plate Width: 4.75" - Back Plate Length: 0.75".
Check Stock

PAUTIX COB LED Strip Lights 20ft/6.1m 6000K Daylight White,504 LEDs/m 6000LM Super Bright DC24V CRI90+ Flexible LED Tape for Cabinet Home DIY Lighting Projects(Power Supply Not Included)

  • 【Ultra Bright & Longer Length】3087 LED chips on this 20ft COB LED Strip Lights(504LEDs/m),which make the emitting units unprecedentedly close to each other, and create super even lighting performance,20ft/6.1m longer length allows you to decorate large spaces.Compared to the SMD 2835: 1 chip on board, or 5050: 3 chips on board,a COB(Chip On Board) LED light has multiple chips on the same PCB (Printed Circuit Board).
  • 【The Highlights of COB】Lower power, higher light efficienc,higher color rendering index(90+). 180 degrees beam angle design for 50% wider lighting,multiple chips on board for uniform illumination,NO MORE worries about dark spot!(Power interface specification: 5.5mm 2.1mm).
  • 【Safe for Daily Use】Compared to regular LED strip lights,the light is soft and uniform,which is safer to your eyes.With real double-layer PCB board,the PAUTIX COB LED Strip Light has better heat dissipation than others,it's safe for children and pets to touch.
  • 【Widely Use & Durable】COB LED light strip with high color rendering index(90+), rich colors and strong reduction applicable to high-end business clubs, jewelry, cabinet lighting,it also provides super bright light for your dressup mirror /make-up table /closet /bookshelf /wine shelf /TV backlight.High....
Check Stock

Wholesales Authentic SMD RGB Cherry mx Switch 3 pin Mechanical Keyboard Speed Silver Silent red Blue Pink Switches (Brown 3 pin, 68 pcs)

  • This link is only the shaft and switches for mechanical keyboard,no keyboard and switch tester included..
  • Pls note: This switches can only be used with smd led PCB keyboard,such as GK61 GK64 mechanical edition..
  • This switch can't replace with optical switches.It can't replace with the keyboard whose 2 pin 4 pin switch leds.It can only use with SMD leds PCB.
  • 2 pin 4 pin switch led can't be used directly with this switches,such as 2x3x4 and 3mm and 1.8mm leds.
  • SMD switches uses together with SMD RGB PCB,the effect is much better than normal switches.
  • These switches can't be compatible with Outemu hotswap socket and can't interchage Outemu switches keyboard since the pin is thicker than Outemu switches.
Check Stock

YMDK Wholesales GH60 64 Anodized Aluminum CNC Case for GK64 DZ60 Type C GK61 Idobo 75 ID75 XD75

  • This link is only aluminum case which CNC Anodized.CNC Feet Included.
  • Compatible with GK64 GK61 PCB,GK61 64 Plate need to replace with gh60 plate.
  • New Type PCB GK64x GK64xs GK61x GK61xs support as well.Just need a GH60 plate is ok..
Check Stock

Wholesales Authentic RGB Cherry Switch Cherry Mx Switches Keycap Keyswitches Keymodule Mechanical Keyboard Switches Replacement (Brown 3 pin*10PCS)

  • ✔This link is only the shaft and switches for mechanical keyboard,no keyboard and switch tester included..
  • ✔Pls note: This switches can be used with PCB smd led,such as GK61 GK64.No switch led hole on the top cover. 2 pin 4 pin switch plug led can't be used directly with this switches..
  • ✔SMD switches uses together with SMD RGB PCB,the effect is much better than normal switches.
  • ✔ Cherry Brown MX RGB Series 3Pin Mechanical Switch Keyboard Replacement.
  • ✔Before buying, Please make sure that what is your Keyboard Switches,This item is supplied to professionals!.
Check Stock

Digital Scoreboard, Electronic Scrore Keeper for Ping Pong, Cornhole, Shuffleboard, Volleyball and More, Change Scores with Remote Control, Indoor Only, Transparent Screen

  • LED Electronic Scoreboard: Different from traditional scoreboard, Ledgital scoreboard is designed and made by 1.8" LED 7 segment, PCB and aluminum alloy housing and controlled by IR remote. It can keep scores from 1-99 with HOME GUEST sign above scores..
  • Durable and Easy to Operate: This is a small score keeper. It's just 9x1.6x4.7in. and 1.5lb, very easy to take around.
  • Aluminum alloy housing make it rather durable.
  • With IR remote(Need 2XAAA batteries, NOT INCLUDED), it's easy to change scores, adjust brightness, enable&disable buzzer sound..
  • Mount Methold & Power: You can mount ledgital scoreboard to wall and also put it on the desk or floor. Beisdes power up your score keeper by AC-DC power adapter, you can also use power bank to light up it. It's really a great scoreboard you even know for your small game room..
  • Indoor Games & Sports Score Keeper: Ledigtal digital scoreboard can be used on any competitive indoor games like ping pong, cornhole, shuffleboard, volleyball, badminton, cornhole, etc..
  • Purchase with Confidence: 30 days money back guarrantee, one year factory warranty. Just purchase with confidence!.
Check Stock

Morris Products Surface LED Recessed Lighting Retrofit Kit – for Recessed Downlighting, Alternative to Incandescent Lights – Energy Efficient, Dimmable, DOB Technology – 3000K, 10 Watts, 4”

  • COMPLETE LIGHTING KIT: Easily install recessed down lighting with this Surface LED Recessed Lighting Retrofit Kit that offers an energy-efficient alternative to incandescent light fixtures and features Driver on PCB Technology..
  • RELIABLE LIGHTING: Make safety a top priority with this Surface LED Recessed Lighting Retrofit Kit that delivers 3000K, 4000K or 5000K color temperatures and 50, 000+ hours life expectancy..
  • LIGHTING UNIT OPTIONS: This Surface LED Recessed Lighting Retrofit Kit for residential or commercial use is available with 10 or 14. 5 watts, voltage of 120VAC and durable aluminum housing and trim..
  • DURABLE CONSTRUCTION, HIGH OUTPUT: Rely on the high output of this Surface LED Recessed Lighting Retrofit Kit that is compatible with most household dimmers and is equipped with a simple screw-in installation and in-line pluggable disconnect..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

2900 pcs SMD 1206 0805 0603 Component Assortment Resistor Capacitor Diode Transistor OpAmp IC Solder PCB SMT Soldering Assorted Kit

  • Huge SMD 1206 0805 0603 Components Assortment, 2800 pcs SMD kit.
  • 1600 pcs Resistor, 520 pcs Capacitor, 180 pcs Transistor, 200 pcs Diodes, 100 pcs Zener, 13 pcs OpAmp, 16 pcs IC, 75 pcs LED.
  • Everything comes in a compact case and very handy.
  • 13 pcs Trim Pots, PCB adapter, SMD Soldering Tip, 0.4mm Solder, Tweezers, Training PCB.
  • Includes a training dummy PCB with 70 components, practice your soldering skills.
Check Stock

Morris Products Surface LED Recessed Lighting Retrofit Kit – for Recessed Downlighting, Alternative to Incandescent Lights – Energy Efficient, Dimmable, DOB Technology – 4000K, 14.5 Watts, 6”, White

  • COMPLETE LIGHTING KIT: Easily install recessed downlighting with this Surface LED Recessed Lighting Retrofit Kit that offers an energy-efficient alternative to incandescent light fixtures and features Driver on PCB Technology..
  • RELIABLE LIGHTING: Make safety a top priority with this Surface LED Recessed Lighting Retrofit Kit that delivers 3000K, 4000K or 5000K color temperatures and 50,000+ hours life expectancy..
  • LIGHTING UNIT OPTIONS: This Surface LED Recessed Lighting Retrofit Kit for residential or commercial use is available with 10 or 14.5 watts, voltage of 120VAC and durable aluminum housing and trim..
  • DURABLE CONSTRUCTION, HIGH OUTPUT: Rely on the high output of this Surface LED Recessed Lighting Retrofit Kit that is compatible with most household dimmers and is equipped with a simple screw-in installation and in-line pluggable disconnect..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock