ReviewsAluminum Oxide Ceramic

Redington Fly Fishing Rod 890-4 Predator Rod W/Tube 8WT 9-Foot 4pc

Intuitive fast action, dialed in-hand balance for lightweight feel and responsive casting.
Anodized Machined aluminum reel seat, ideal for all water conditions.
Aluminum oxide stripping guides with ceramic inserts and hard Wire anodized snake guides for durability, section tips epoxy coated to prevent sticking.
Laser-etched 5-5022T-890-4 Reference on reel seat for quick rod identification, includes rod tube.

Check Stock

Work Sharp Knife & Tool Sharpener 6000 Grit Fine Replacement Belt Kit WSSA0002705

Built in angle guides provide consistent and repleatable angle to ensure you can quickly and accurately hone the edge of your knives..
Assorted replacement belt Kit includes (2) P80 coarse, (2) P220 medium, and (2) 6000 fine. These abrasive belts are direct replacements for the abrasive belts that comes standard with the WSKTS, WSKTS2, WSKTS-KT.
Premium grade, long lasting abrasive belts. Specific selection for optimum sharpening performance.
Manufactured by leading brands in belt technology: Norton (P80 & P220) and micro-mesh (6000).
silicon Carbide (6000) - backing: waterproof polyester (P80, P220).
flexible cotton backing with polymer emulsion cushioning layer (6000).
Includes (2) belt of each grit: P80, P220, and 6000..

Check Stock

Official Work Sharp Knife & Tool Sharpener Assorted (P80, P220, 6000) Replacement Belt Kit

Built in angle guides provide consistent and repleatable angle to ensure you can quickly and accurately hone the edge of your knives..
Assorted replacement belt Kit includes (2) P80 coarse, (2) P220 medium, and (2) 6000 fine. These abrasive belts are direct replacements for the abrasive belts that comes standard with the WSKTS, WSKTS2, WSKTS-KT.
Premium grade, long lasting abrasive belts. Specific selection for optimum sharpening performance.
Manufactured by leading brands in belt technology: Norton (P80 & P220) and micro-mesh (6000).
silicon Carbide (6000) - backing: waterproof polyester (P80, P220).
flexible cotton backing with polymer emulsion cushioning layer (6000).
Includes (2) belt of each grit: P80, P220, and 6000..

Check Stock

Benchmark Abrasives 2\ Ceramic Quick Change Sanding Discs with a Male R-Type Backing Pad 60 Grit - 25 Pack

QUANTITY: This is a packge of 25 Ceramic Quick Change Discs..
DIMENSIONS: 2" Diameter with a Male R-Type backing pad..
APPLICATIONS: Ceramic Quick Change Discs prodive the best cut rate to cost ratio. They are well-suited for grinding, deburring and finishing..
USE: Our quick lock discs are made for use on a die grinder and should only be used with the proper size mandrel. 2" discs should be used with a 2 inch mandrel..
INFO: Ceramic grains run cooler than aluminum oxide and zirconia grains. Ceramics are the number one choice for work on heat sensitive alloys such as stainless steel, nickel alloys and titanium..

Check Stock

3M Green Corps Flexible Grinding Wheel, T27, 7 in x 1/8 in x 7/8 in, 36, 20 per inner, 20 per case

3M Ceramic Abrasive Grain is engineered for exceptional durability and cutting capability on carbon steel and tool steels to help increase productivity.
Durable ceramic grain belt lasts longer than aluminum oxide belts, producing more parts per belt and requiring fewer belt changes.
3M Ceramic Abrasive Grain cuts fast, helping to increase productivity and throughput.
Smooth running wheels produce less vibration than conventional grinding wheels.
Stands up to medium to high pressure production environments, contributing to longer service life.

Check Stock

SUNJOYCO 69pcs 2 inch Quick Change Roll Lock Sanding Discs Set, Surface Contidioning Discs 1/4\ Pad Holder for Sander Die Grinder Accessories Sanding Disc Grind Deburr Strip Grind Polish Rust Removal

VALUE KIT: 39 aluminum oxide discs (40#/60#/80#/120#/180#/240#), 12 nylon SiC sanding discs (60#/80#/120#), 12 zirconium oxide discs(coarse/medium/fine), 2 black sanding discs,1 Flap Disc, 1 Wool Disc,1 disc pad holder in 1/4". Totally 69 Pcs. With this 2-inch quick change sanding disc set, surely it will meet your many needs.
SECURE FIBER COVER: The quick change discs with special fiber as the base and Zirconia/Silicon Carbide/Ceramic/Aluminium Oxide/Zirconia Black Strip/Compressed Wool as the grinding grain, it shows excellent performance on any kind of surface..
QUICK CHANGE & STABLE DESIGN: There is a safe torque spiral on the grinding disc, you can easily spirally connected to the holder, providing ultra-stable and accurate surface grinding. The safety design saves you from worrying about falling off when using..
WIDELY USED: Our quick change disc is perfect for the surface prep, finishing, deburring and polishing of wood, plastic, pipes, carbon steel, cast iron, titanium, aluminum, brass, bronze, copper, or hardwoods as well as heat-sensitive materials such as stainless steel, nickel alloy or cobalt alloys..
HIGH COMPATIBILITY: With the 1/4" discs pad holder, this 2 inch quick change sanding discs set can be attached to 1/4 collet die grinders, rot....

Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.

Check Stock

Hilitand 1pc Ceramic Bearing 6001 High Precision Full Ceramic ZrO2 Deep Groove Ball Bearing 12x28x8mm

【ZrO2 and PTFE】This ceramic bearing is made of high quality ceramic ZrO2 and PTFE material, high precision and high speed..
【zirconium oxide races】This deep groove ball bearing adopted zirconium oxide races design, resistant to high temperatures and corrosion..
【smooth】Small frictional resistance, low power consumption, high mechanical efficiency, more efficient than metal bearings..
【full ceramic】The is a full ceramic ball bearing with diamagnetic electrically insulating, has better performance than metal ball ceramic bearings..
【wide applications】Standardization size, can be used for machinery manufacturing, equipment installation and maintenance..

Check Stock

Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver by Nabob Deals with Bonus Tool

Arctic Silver 5 contains over 88% thermally conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles..
Its unique high-density filling of micronized silver and enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance and stability.
Bonus Tool will come in handy rather then getting your hands dirty.
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003″ thick, the 3.5 gram syringe will cover approximately 16 square inches..

Check Stock

3M Green Corps Cut-Off Wheel 20275, Ceramic, 13300 rpm, 4-1/2" Diameter x 3/64" Width, 7/8" Arbor, Green (Pack of 50)

Ceramic abrasive grain cuts faster and lasts longer than non-ceramic grain, offering significant productivity gains.
Performance far surpasses that of aluminum oxide wheels.
Rigid, reinforced resin-bonded wheel slices through almost all materials including stainless steel, mild steel, and aerospace alloys.
Wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used.
MUST BE USED WITH ANSI-APPROVED FLANGES FOR TYPE 1 CUT-OFF WHEELS AND A WHEEL GUARD THAT FITS THE SIZE OF THE CUT-OFF WHEEL.

Check Stock

100pc 1/8\ Shank Rotary Tool Accessory Set for Dremel (Sanding | Polishing | ...

Universal fit for all rotary type tools including Dremel | 1/8th Shank.
Sanding Band, Rubber Mandrel for Sanding Band, Fiber Glass Cutoff Wheel, Abrasive Wheel,.
15pc Soft Wool, 9pc Pink Aluminum Oxide, 9pc Green Aluminum Oxide, Polishing Woolen Wheel.
30pc Soft Wool, 10pc Hard Wool, Silicon Cutoff Wheel, Aluminum Oxide Cutoff Wheel,.
Stainless Steel Brush, Mounted Abrasive Point, Diamond Burs, HSS Burs/ Drills, HSS Burs/ Drills.

Check Stock