ReviewsAluminum Plastic Packaging Tube

PASS N PUFF | The Football You can Smoke | Purple and Gold Football

  • Ball - Injection Molded Medical Grade Plastic.
  • Dimensions - 4.8 Inches Diameter / 9.3 Inches Length.
  • Parts Included - Cap, Tube (smoke holder), Ball.
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

20 Sticks Aluminum Welding Rods ,20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉,Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

ProBalkn Deburring Tool with 6 HSS Blades for Steel, Cooper, Brass, PVC, Resin and Mini Tube Cutter with 1 Extra Blade for 1/8' - 1-1/8' Stainless Steel, Cooper, Aluminum, Brass, Plastic Pipes

  • Package Content: 1 x tube cutter (2.87x1.97x0.98 inches) with 1 x extra blade.
  • 1 x deburring tool (4.9 x 0.87 inches) with 6 x different blades for metal, plastic, and brass.
  • All-Purpose Deburring Tool: Ranging from DIY projects, home use, to professional industrial and plumbing applications, this deburring tool removes fast and easy burrs from the straight edge, curved edge, and holes.
  • with the storage handle design, spare blades are easily kept in and could be reached at any time.
  • Various Blades: Included 6 HSS sharp steel blades allow a precise and smooth hand deburring of all sorts of edges.
  • 2 x BK3010 blade with 45° angle for plastic.
  • 2 x BS1010 blade with 40° angle for the brass and copper.
  • 2 x BS1018 blade with 45° angle for steel.
  • Mini Tube Cutter: Our pipe cutter is designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass, and plastic tubing, ensuring easy control of cutting pressure for clean cuts.
  • the cutting capacity is from 1/8" to 1-1/8" (3-28mm).
  • Sturdy Aluminum Cast Frame: The tube Cutter body is made of lightweight and durable aluminum casting.
  • the blade is built using CNC machining with special durable and high-quality alloy steel.
Check Stock

8 Pieces Toothpaste Tube Squeezer Dispenser Toothpaste Rollers Clips for Bathroom (Beige, Gray, Black, Rose Red, Green, Yellow, White, Blue)

  • Practical tool: this toothpaste tube squeezer is a practical tool for not wasting, you can use it for the kitchen, bathroom or hobby space.
  • Easy to use: the toothpaste squeezer designed with clip shape, just push flattened end of tube into squeeze slot and pull through, no need any more strength, convenient and easy to squeeze cream clean.
  • Multi-function: the plastic tube squeezer works well for aluminum and plastic tubes, fits for squeeze toothpaste, cream tube, cleansing foam or other items.
  • Reliable quality: these toothpaste clips are made of quality plastic, wearable and safe, won't break easily, can be last for a long time.
  • Quantity: each package comes with 8 pieces toothpaste squeezers in 4 different colors, including yellow, gray, blue and white, each color 2 pieces, enough for use.
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

YUFUTOL SA5-NF Aluminum Cut Tungsten Carbide Rotary Burr Bits File for Die Grinder,Cylindrical Shape with 1/4 inch Shank 1/2 inch Head Diameter 1 inch Flute length Pack of 1

  • 【Shape】SA-5 Cylindrical Shape aluminum cut head meet US standard with1/4" shank,1/2" head diameter, 1" flute length, 2.77” total length.
  • 【Durable】Made of tungsten carbide with 92HRS Hardness enhance the service life and rigidity of tools, and the single deeper flute can prevent debris clogging.
  • 【Usage】Suitable for Cutting Aluminum and other Non-ferrous metals, soft steel, non-metallic materials,andall kinds of wood, they are used in electric, pneumatic, and hydraulic die grinder.
  • 【Target】This is an essential bit for woodworker& DIY carving fans, easy to grasp and use, safe and reliable.
  • 【Packaging】Packed with a transparent plastic tube for safety storage and protection.
Check Stock

Rockville RVMIC4 Round-Base Microphone Stand With Quick Release Hand Clutch

  • Rockville RVMIC4 Professional Round-Base Microphone Stand With Quick Release Hand Clutch..
  • One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)..
  • Adjustable Height Range: 43-69 inches. Aluminum leg joints..
  • This mic stand is the easiest and quickest to adjust on the market!.
  • The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
  • This is about 50 % thicker than almost all other brands on the market making this one of the sturdiest stands in the world..
  • 100% steel construction and Aluminum joints! NO Plastic parts!.
  • Virtually Unbreakable (under normal use). Cable guiding clip on the stand for running cables..
  • Black Color. Top Tube Diameter: 0.75" inch. Lower Tube Diameter: 1" inches..
  • Round base with a diameter of 9.84" inches. This rock solid stand weighs in at 8.8 LBS!.
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

Yellow Jacket 60377 1/2' Tube Bender (Bending Radius: 1-1/2')

  • WHAT IT DOES: The BLACKMAX BTB300 is a "ratchet crossbow" style tube bender that is ideal for easily bending soft copper and aluminum tube up to 90 degrees in both "forward" and "reverse" configurations.
  • CUSTOMIZE BY SIZE: The BTB300 features seven quick change color coded mandrels for bending soft copper and aluminum tube.
  • SUPERIOR DESIGN: CPS brings the BLACKMAX BTB300 to market with a compact, professional, patented design.
  • INCLUDED: The BTB300 comes with a strong molded plastic carrying case for safe storage.
  • ABOUT US: CPS Products is a business built by technicians, for technicians. We design Tools for the Professional Service Technician. With the world’s most comprehensive range of Leak Detection technologies, Smart Diagnostic tools, and proven Maintenance Solutions, CPS Products has been The Workingman’s Choice since 1989.
Check Stock

CORNERIA 2pcs Toothpaste Tube Squeezer Plus with Long Size 2.8IN - Premium ABS Plastic & Silicone pad Toothpaste Squeezer Rollers Even Tube Cosmetics Tube Ketchup etc

  • What You will get: Each package comes with 2 pieces toothpaste squeezers in black color, enough for use. CORNERIA Tube dispener squeezes the tube....
  • Practical tool: this toothpaste tube roller is a practical tool, not wasting, you can use it for kitchen, bathroom or hobby space(Toothpaste, facial....
  • Premium quality: the toothpaste tube squeezer is made with high quality plastic, durable and safe to use, won't break easily, can be last for a long....
  • Easy to use: CORNERIA toothpaste squeezer designed with a rotate handle, just insert your toothpaste into the rolling shaft, then rotate the handle,....
  • Multifunctional tube holder: CORNERIA tube squeezer works well for tubes of width less than 3 inch, works on aluminum and plastic tubes, suitable for....
Check Stock