ReviewsAluminum Plastic Panels

Palram - Canopia Hybrid 6' x 8' Greenhouse Heavy Duty Shelf kit

  • Product 1: Virtually unbreakable 4 mm twin-wall polycarbonate roof panels block up to 99.9% of UV rays and diffuse sun light eliminating the risk of plant burn and shade areas.
  • Product 1: Crystal clear polycarbonate side panels provide 90% light transmission.
  • Product 1: Rust resistant aluminum frame extends 6'-10" from floor to peak.
  • Product 1: Kit Includes adjustable roof vent, rain gutters, lockable hinged door with magnetic catch, aluminum frame, polycarbonate panels and a galvanized steel base.
  • Product 2: Easily adjusts to move anywhere in your hobby greenhouse.
  • Product 2: Ability to mount additional shelves side by side.
Check Stock

SnatchLatch Heavy Duty Door Lock Protection Device - Anti Theft - for Use with Cam Bar Style Shipping Container Conex Door latches

  • Specifically designed for installation on the corrugated side walls of standard shipping/cargo containers. Vents are 6" wide by 12" high. Louver panels are galvanized steel, not aluminum or plastic, and the screens are thick perforated aluminum sheet to keep rodents and bugs out. Stainless Steel mounting hardware, Installation Instructions, and a Recommended Installation Location Guide, is also included..
  • One kit will provide passive cross flow ventilation through the container to significantly reduce heat in the Summer and moisture buildup from condensation in the Winter with no power, or welding, required. Install one Vent low at a minimum of 5 feet from the end of the container, on the side that is shaded from afternoon sun, to supply cooler air and the other Vent high on the opposite wall, 5 feet from the other end, to exhaust hot air..
  • A minimum of one kit is recommended for a 20' container, and 2 kits for a 40'. More kits may be desired depending on the color and location of your container. Darker colored containers, exposed to direct sunlight, will achieve higher inside temperatures than lighter colored ones. A single vent, of any style, including wind turbines that we don't recommend, will not remove heat if another "makeup air" vent is not als....
Check Stock

HQST Adjustable Solar Panel Tilt Mount Brackets, 28 inch Solar Panel Racks with Foldable Tilt Legs - Support up to 150 Watt Solar Panels for Boats, RV, Roof Off Grid System

  • 【WIDE APPLICATION】: Adjustable solar panel mounting brackets designed for off-gird solar systems, compatible with HQST Solar Panels under 150W. Great addition for use on boats, RV, roof, marine etc..
  • 【HIGH EFFICIENCY】: Ideal for positioning solar panels at an angle on a rooftop.Gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat.Maximum tilt angles depend on the size of solar panels..
  • 【EASY TO INSTALL & ADJUST】: Quick assembly with stainless steel fasteners and precise hole placement. The package includes the bracket between tilt to panel..
  • 【LIGHT WEIGHT BUT STRONG】: Our solar tilt mounts are made of aluminum alloy, which is light weight and ideal for easy transportation and safe mounting..
  • 【 PACKAGE INCLUDES】: Solar panel mounting kit comes with 4 * fixed brackets.
Check Stock

Inside the Greenhouse

  • Virtually unbreakable 4 mm twin-wall polycarbonate roof panels block up to 99.9% of UV rays and diffuse sun light eliminating the risk of plant burn....
  • Crystal clear polycarbonate side panels provide 90% light transmission.
  • Rust resistant aluminum frame extends 6'-10" from floor to peak.
  • Kit Includes adjustable roof vent, rain gutters, lockable hinged door with magnetic catch, aluminum frame, polycarbonate panels and a galvanized steel....
  • Withstands winds up to 56 mph when combined with the Palram - Canopia Nature Series anchor kit and supports snow loads of up to 15.4 lbs. per sq. ft..
Check Stock

Gorilla Truck Bed Liner Coating - 14.3 Ounce Aerosol

  • Use on truck beds, tail gates, running boards, brush guards, rocker panels, fender flares, bumpers, roll bars, push bars, and other trim..
  • Great for prepped metal, aluminum, fiberglass, plastic and wood surfaces.
  • Easy to Use, Quick Drying & Clog Free Nozzle.
  • For even more creative uses, try this product to protect your boat deck, wrought iron, exterior steps, and more!.
Check Stock

MINIQ Bench Drill Stand 710W Mini Electric Bench Drilling Machine Drill Chuck 1-13mm

  • Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling..
  • Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool..
  • This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts..
  • Infinite speed selection within the machine's six speed ranges(0-2800r/min)..
  • Duty cast iron base: Heavy base weight and the three-hole screw positioning can reduce noise, and make the work more stable without vibration and movement..
Check Stock

Pro-Ject VC-E Compact Record Cleaning Machine

  • Clean Your Vinyl LPs in a Jiffy: Pro-Ject VC-E Record Cleaning Machine Features Compact Dimensions, Fluid-Resistant Aluminum Composite Panels, Easy Operation.
  • Included accessories: Brush, Vacuum Arm, Self-Adhesive Arm Strip, Plastic clamp, Wash it (100 ml), Power cable.
  • Power consumption: 230 V / 800 W, 120 V / 650 W.
Check Stock

ONLYCTR Aluminum Greenhouse for Outdoors 8'x12' , Polycarbonate Green Greenhouse with Adjustable Roof Vent and Rain Gutter, Outdoor Hobby Greenhouses for Backyard Plants Flowers Vegetables (8’ x 12‘)

  • ...er drainage and collection, your crops can enjoy rainwater which is rich in nitrogen and oxygen as long as you have one pipe. Three locks ensure the safety of your plant babies or lovely pets! Manual vent windows allow for proper humidity and ventilation levels.
  • anchor devices for additional stability of your large aluminum greenhouse.
  • AIRY SPACIOUS SPACE OUTDOOR HOBBY GREENHOUSE - 96 sq. Feet growing space and 7.4' of head room. Keep a comfortable distance between plants to achieve optimal growing conditions. Extra tall, wide double doors. We also upgraded the door for a swing-out lockable design which not only makes it easier for you to walk into the large greenhouse for daily use but also provides more tightness than the sliding door.
  • EXTEND GROWING SEASON FOR VARIOUS SPECIES - Using ONLYCTR aluminum green greenhouse to create a perfect warm environment for your plants, vegetables, fruits, or pets (suitable for animals that favor warmth, such as lizards, geckos, snakes, etc.) to ensure they enjoy enough sunlight while keeping away from cold weather, frost, and excessive rain, which extend the growing season into early spring and late and delay the harvest se....
Check Stock

DNYSYSJ 1500W CNC Router Engraver Machine, 6040 3Axis USB Engraving Drilling Milling Carving Machine 3D Carving Desktop Machine DIY Artwork Woodworking

  • ★【It can work with various materials(metallic & non-metallic)】Such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. The machine can connect with computer as other external device such as printer, scanner. With the assist of the ROUTER 6040T, your design idea will be real-time display..
  • ★【Water cooled spindle motor】It can work longer time than air cooled motor.Water cooled spindle motor has higher stability and better concentricity than air cooled motor,water cooling spindle works more stable and durable.(tips：1. The spindle motor must connect with the VFD.)The mini router Frame is movable..
  • ★【It can used for engraving】Advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc..
  • ★【Wide Range of Applications】This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Pla....
Check Stock

Prime-Line T 8731 Storm Door Panel Clip, Deep Reach with Screws, White (Pack of 8)

  • Used to secure glass or screen panels to the frame of storm doors.
  • Aluminum construction with plastic screws.
Check Stock

BTSHUB Straight Punch Flange Tool, Air Hole Punch and Flange Tool Sheet Metal Flanging Car Repair

  • ✔【2 in 1 Function】The tool can achieve the hole punching and flanging of workpiece, for creating and installing patch panels, replacement panels, or custom sheet metal work..
  • ✔【Application】Suitable for automotive body repair, also for sheet metal, iron plate, plastic, machinery, etc..
  • ✔【Professional Design】Designed with anti-slip rubber grip for safe use. Every pull of the lever delivers a single punch or a single flange crimp with precision control..
  • ✔【Easy to Use】Labor-saving and durable. It can be operated with one hand. Features a rotating head for convenient use, the internal dust-proof net structure effectively averts foreign matter from entering the machine body..
  • ✔【Specification】Material: Aluminum Alloy.
  • Air Inlet (NPT) 1/4" Min. Hose Size (I.D.) 3/8".
  • Air Consumption: 4 SCFM, Open Air: 90 PSI.
Check Stock