ReviewsAluminum Profile Bending Machine

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Befenybay 20PCS Black T Slot L-Shape 90 Degree Interior Inside Corner Connector Joint Bracket with Screws for 6mm T Slot Aluminum Extrusion Profile 2020 Series Slot

  • Made from Zinc Alloy, high hardness and a long service life for good rust resistance and better performance.
  • Aluminum extrusion 2020 series,Suitable for connecting at the specified angles, Aluminum 6mm T Slot framing profiles of 20 metric series.
  • Function: connect two alumnum profile together.
  • Strong connection function at inner of aluminum profile slot.
  • Widely used for 3D printers, CNC Routers, CNC laser cutters, Robotics Projects,Machine guards etc.
Check Stock

Bracelet Metal Stamping Kit- Aluminum and Copper Bracelet Blanks w/ Bracelet Bending Bar for Jewelry Stamping Kit- Metal Stamping Blanks for Zoom Engraving Tool or Ferric Chloride Etching- 19 Pieces

  • COPPER AND ALUMINUM: try three sizes of both copper and aluminum in this bracelet making starter kit (1/4", 3/16", 5/8").
  • 3 SIZES - 19 Pieces: this jewelry stamping kit comes with 19 total pieces to stamp, engrave, or etch to your hearts delight.
  • MULTIPLE USES: Blanks are tested in crafting die cut machine (Maker, Explore Air 2, Silhouette Cameo, Curio, or Brother Scan and Cut machine). Also can be etched using ferric chloride or laser engraver.
  • BENDER BAR: Aluminum bracelet bending tool included to help shape bracelets appropriately to size.
  • INSTRUCTABLES INCLUDED: Instructions for die cut use and ferric chloride acid etching, project ideas, and opportunity for designs are included in packaging.
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

ImpressArt - Bracelet Bending Bar Kit Tool for Bending Metal Blank Bracelets Cuffs Bangles for Metal Stamping & Metal Engraving

  • Used to easily bend metal bracelet stamping blanks into cuffs, bracelets, and bangles to a flat top that sits nicely on the wrist with minimal effort..
  • Bends metals including: aluminum, brass, copper, Alkeme, thin steel and more.
  • Create unique & personalized metal bracelets with the ImpressArt Bracelet Bending Bar Kit. The kit comes complete with one bracelet bending bar and....
  • Includes 8 bracelet stamping blanks in 2 different sizes: (4) Aluminum Bracelet Blanks, 1/4" x 6", 14 gauge & (4) Aluminum Bracelet Blanks, 3/8" x 6",....
  • Bending Bar easily shapes metal strips into bracelets. Simply place the strip into the notch and bend around the curved arch. Then do the same for the....
Check Stock

Mophorn 1/4 to 7/8inch Tubing Bender 7 Heads Nylon Hydraulic Pipe Bender Copper 90 Degrees Multi-function 6-22mm Manual Ratcheting Tubing Bender Set with Bending Function Carrying Box

  • 90° Tube Bending: The ratcheting tube bender can easily and smoothly bend the diameter of 6, 8, 10, 12,16, 20, 22 mm tubes to 90 degrees. Mechanical....
  • 1/4"-7/8" Bending Range: We provide 7 interchangeable tube bender heads, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy....
  • Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good....
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with....
  • Wide Application: The reverse tubing bender is suitable for copper, aluminum tubes. It is widely used in sanitary and heating installations, floor....
Check Stock

3 Axis DRO Digital Readout Magnetic Scale DRO Display Kit CNC Milling Lathe,DIY Travel Length

  • ...aced with not knowing how to choose the right magnetic scale encoder travel length? Tailor-made for machine tool enthusiasts, experience the fun of magnetic scale magnetic scale combination,-Simple operation, arbitrary assembly.
  • So you will have the follow product : A -----Aluminum profile 1pcs 1M and 2pcs 800mm , -Various assembly methods ,1 .you can cut it to 3pcs short scale 2. 1pcs long 1.8M and a short scale .That means the DIY kit can be widely for lathe machine .milling machine. B , 3pcs Magnetic Scale Sensor (reading head) 5um resolution , C. Magnetic Tape & Stainless Steel Strip -2.4M D,End cap - 3 Pair. E.All of accessory for mounting scale ( User Manual included ) . F Digital Readout 3 Axis DRO.
  • Why choose magnetic scale : Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class ,life time is longer thna linear glass , baesd on we provide 5 years warranty.
  • High Performance- 3 Axis DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User manual , freeing hands from paper....
Check Stock

VEVOR Pipe Bender, 7 Dies 1/4-7/8 Inch Refrigeration Ratcheting Tube Bender Kit, 90° Tubing Bender with Reverse Bending Attachment for HVAC

  • Universal Usage: The multifunctional tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems..
  • 1/4"-7/8" Bending Range: We provide 7 Elbow diameter range for pipes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 inch (6, 8,10,12,16, 19, 22mm). Tubing cutter with reamer and extra blade capacity:1/8 to 1-1/8-inch (3-28mm). The bending heads can meet different usage needs, making your work more convenient..
  • Kit Included: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Inner Outer Reamer x 1, Carrying Box x 1, Manual x 1. Quality machined aluminum alloy is for strength and durability..
  • Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze..
  • 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 6-22 mm tubes in both forward and reverse to 90 degrees. It allows tight 90 degree angles to be made easily out of a wall or ot....
Check Stock

Rockler 921727 Rail Coping Sled

  • 【SBR16 LINEAR RAIL】- Two 2000mm/78.8″ long SBR16 rail shafts, and 4 SBR16UU blocks are included in the package. Smooth sliding blocks moving freely..
  • 【CARBON STEEL MATERIAL】- Parts are made of carbon steel, with quality bearing steel linear bearings and aluminum alloy housing. Surface chrome plating treatment to be anti-rust, high hardness and more durable..
  • 【SMOOTH SLIDING SYSTEM】- With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support..
  • 【EFFORTLESS TO INSTALL】- 5 pre-drilled holes ensures easy mounting, no need for maintenance. Stainless steel Linear optical axis guide bearings linear movement. 4 pieces SBR16UU Bearing Blocks afforded..
  • 【WIDE USES】- Gross Weight: 25.35 lb (11.5 kg), lightweight design for easy to use. Suitable for DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc..
Check Stock

IDEAL Electrical 74-047 Aluminum Bender – Aluminum, Conduit Pipe Bender w/handle for 3/4 in. EMT Pipes. Cutters and Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the aluminum conduit bender offers application in plumbing repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with aluminum, the rugged construction of the lightweight iron bender head offers durability to withstand long-term heavy-duty use and convenient handling. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the aluminum pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Aluminum EMT bender is suitable to bend 3/4 in. EMT metal pipes as well as 1/2 in. Rigid & 1/2 in. IMC pip....
Check Stock