ReviewsAluminum Profile Tube

Imachinist S5612131418 56-1/2\ Long, 1/2\ Wide, 0.025\ Thick M42 Bi-Metal Bandsaw Blades for Soft Ferrous Metal Cutting Variable Teeth (14/18TPI)

  • Bi-metal type, HSS M42 grade, 56-1/2" long, 1/2" wide, 0.025" thick, 14/18 TPI.
  • 14/18 TPI is variable teeth profile, suitable for thin ferrous metal tube profile etc, do not cut any non-ferrous metal like aluminum etc..
  • 8% cobalt with 2% tungsten content to increase durability abrasive resistance.
  • Suits all bandsaws which use 56-1/2" long, 1/2" wide band saw blade.
Check Stock

Low Profile Scope Rings 1 inch – Rifle Scope Rings Scope Mounting Rings 1 Inch for Picatinny and Weaver Rails(2 Pieces)

  • The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails..
  • The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm)..
  • With mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely..
  • Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g..
  • Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included..
Check Stock

CDM GEAR 20 Gage BMT Light Mount with 3 Slot Rail, Compatible with Remington 870 20ga. Only

  • PURPOSE - The CDM Gear BMT mount light mount holds the light between the barrel and magazine tube for fingertip actuation of lights on either the left or right side of the gun.
  • COMPATIBILITY – CDM Gear Light Mount fits Remington 20 gauge with 7/8" diameter magazine tube extension.
  • APPLICATION - The BMT mount with a single 3 slot rail for 12 gage guns can use optional 3 slot rails for mounting additional lighting or a laser on the other side.
  • INCLUDES – Comes with a single Swivel dock. Uses a single bolt to mount. Comes with all wrenches and 3M polyurethane no slip grip pads.
  • COMPOSITION – Machined from 6061-T billet aircraft aluminum, engineered for weight reduction and designed for a low, factory looking profile..
Check Stock

Monstrum Guardian 3-9x32 Rifle Scope with Illuminated MOA Reticle | Black

  • Adjustable 3-9 times magnification, for targeting out to 600 yards and beyond.
  • Fully illuminated MOA reticle with MOA hashmarks for ranging information and inline dial controlled brightness adjustments.
  • Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog.
  • Precision 1/4 MOA/click windage and elevation adjustments.
  • Package includes Medium Profile Picatinny/Weaver Scope Rings and set of flip-up lens covers.
Check Stock

Monstrum Tactical Scope Ring Set for Picatinny/Weaver Rails | 1 inch Diameter | Low Profile

  • 1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes.
  • Mounts to any flat top Picatinny or Weaver rail equipped rifle.
  • High profile in height, 0.185 inches from base of mount to bottom of rings.
  • Light weight 6061 aerospace aluminum construction.
  • All Monstrum Tactical mount and accessory products come with a lifetime guarantee.
Check Stock

76.4 Carbon Fiber Camera Tripod with 35mm Low Profile Ball Head ARTCISE Professional Lightweight Compact Tripod with 1/4 Female Thread Hole for DSLR Camera Video Camcorder Max Load 33lbs/15kg

  • ...ber,main parts all metal made and via CNC Anodic Oxidation technology, 25.5mm large diameter tube,the load capacity can reach 33lbs (15kg). A stability hook can hang additional weight and the non-slip rubber feet design to increase the stability..
  • 【Low profile ball head】This low profile ball head adopts superior aluminum-alloy construction, CNC precision finishing, anodized surface, it is very strong and durable.Compared with traditional ball head, low-profile ball head design create stronger locking force and higher stability..
  • 【2 in 1 Tripod Monopod】This tripod can be quickly disassembled with the central axis screw and transformed into a monopod (35” to 80”). It can be turned into a monopod or walking stick alone to make your photography more diverse. And the central pole can be inverted to allow for low angle shooting and macro photography..
  • 【Extend easily】Tripod tube with quick release twist locks allow you to adjust the tripod height for 22.6" up to 76.4" in seconds. 3-position leg angle adjustment system helps you take photos flexible for different scenarios and photography conditions. The semi-automatic locking method is more convenient..
Check Stock

UTG Angled Offset Low Profile Ring Mount for Light Devices

  • UTG New Gen Tactical Flashlight Ring with 45 Degree Offset Angle for Optimal Low Profile Center Bore Alignment.
  • Offset Angle Designed to Support Modern Shooting Techniques, Allows Clearance Of Most Front Sight Post While Mounted On a Top Picatinny Rail.
  • Light Weight, Precision Machined Aluminum with Anodized Black Matte Finish.
  • Integral Max Strength Twist-lock Mount to Fit on any Picatinny/Weaver Rail.
  • Complete with 2 Spacers to Accept 27mm, 25.4mm(1"), or 20mm Tube Light Device.
Check Stock

Monstrum Guardian 3-9×50 AO Rifle Scope with Parallax Adjustment | Black

  • Adjustable 3-9 times magnification, for targeting out to 600 yards and beyond.
  • An adjustable objective lens or AO – that allows for sharper focus of the target image, elimination of parallax, and range estimation.
  • Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog.
  • Precision 1/4 MOA/click windage and elevation adjustments with locking turrets.
  • Package includes High Profile Picatinny/Weaver Scope Rings and set of flip-up lens covers.
Check Stock

NcDe 1'' /2Pieces Dovetail RifleScope Mount Rings Raise High Profile for 11mm Dovetail Rails and Scope Sight

  • Precision CNC machined from high strength 6061-T6 aluminum alloy with Anodized Black Matte Finish..
  • Strong-Yet-Lightweight Alloy Construction.
  • High Profile (14mm). Perfect for standard riflescopes 25.4mm scope tube, and flattop picatinny rails.
  • Adjustable 2-Piece Mount Provides Extreme Mounting Flexibility.
Check Stock

ARIES 2154000 AdvantEDGE Chrome Aluminum Truck Bull Bar, Select Chevrolet Silverado, GMC Sierra 1500

  • EDGY LOOK. Give your truck an aggressive front-end accent with this edgy, modern bull bar. It features a unique eight-sided tube profile with an angular design to complement today’s pickup trucks with a custom, aftermarket look.
  • NON-CORROSIVE. This powder-coated chrome bull bar is ready to take on the elements with its all-aluminum construction. With a tough powder coat finish, this aluminum bull bar easily withstands rain, snow, dirt, mud and more.
  • LED-READY. This bull bar push bar is equipped with an integrated track in the crossbar to mount LED lights or an LED light bar for functional, aftermarket lighting on the road or trail.
  • LIGHTWEIGHT. The aluminum construction of this push bumper bull bar makes it lightweight compared to steel models, keeping cumbersome, unnecessary weight off your truck.
  • NO-DRILL FIT. This truck bull bar installs with no drilling required and fits select model years of the Chevy Silverado 1500 and GMC Sierra 1500, 1500 Classic or 1500 HD Classic.
Check Stock

Monstrum Guardian 6-18x50 AO Rifle Scope with Parallax Adjustment | Black

  • Adjustable 6-18 times magnification, for targeting out to 1000 yards and beyond.
  • An adjustable objective lens or AO - that allows for sharper focus of the target image, elimination of parallax, and range estimation.
  • Aircraft grade 6061 aluminum scope body with a sealed, nitrogen-charged tube for resistance to water and fog.
  • Precision 1/4 MOA/click windage and elevation adjustments with locking turrets.
  • Package includes High Profile Picatinny/Weaver Scope Rings and set of flip-up lens covers.
Check Stock