ReviewsAluminum Steel Machining Parts

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..

Check Stock

ER-32 Hex Collet Block Chuck, Workholding Collets Tool Holder for CNC Lathe Engraving Machine, High Strength and Hardness, Sturdy and Durable

Through hole allows the machining of long parts..
Used for quick setup on CNC machine tools..
Made of tool steel material, through hardening treatment..
Professional manufacturing, high machining accuracy..

Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....

Check Stock

10 Pieces 1/2\ Aluminum 6061 Round Rod 14\ Long +/-.07\ Solid T6 Lathe Extruded Bar Stock .50\ OD

6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
The 12" long solid round rod bar is long enough to be cut and applied to different projects..

Check Stock

RiToEasysports 2Pcs Universal RC Servo Arm,25T Steering Gear Arm Servo Arm for 1/10 RC Car (Silver)

¡¾Durable And Sturdy¡¿Made of high quality aviation aluminum alloy material, durable, long service life.Hard aluminum construction for precision and durability..
¡¾Compatible With¡¿Special designed for 1/8 1/10 RC car model, 31 x 10mm / 1.2 x 0.4in of the accurate size.Compatible With TRX4..
¡¾Easy to Install¡¿Small size, light weight, no extra burden, and easy to install and disassemble..
¡¾Stable Performance¡¿CNC machining makes it accurate size, stable performance, with high strength and durability and not easy to deformation..
¡¾Wonderful Upgrade Parts¡¿25T servo arm provides cushioning and protection for your RC car model, wonderful upgrade parts..

Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

8mm and 10mm End Mill Set, Material : Tungsten Carbide.
End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..

Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..

Check Stock

MZS Black Motorcycle Brake Clutch Levers Wheel Roller Adjustable Short CNC ME-1068 Compatible with YZF R6 2005-2016 | YZF R1 2004-2008

...your bike before ordering. Be sure to follow the installation instructions (in the box) to check and test before riding..
UPGRADE DESIGN - MZS has created a range of brake and clutch different to other motorcycle levers, shape and design of the handle follow ergonomic viewpoints. And modern T6061 CNC Ultra-precision machining techniques are used which ensure a long life of the product and a good visibility of the mechanical engraving logo..
WHEEL ROLLER ADJUSTABLE - It added ultra-tight spherical anti-slip parts, and it is covered with the skidproof stripe, prevents the fall off of the chosen adjusters setting and lever position of the during driving. Compared to the dialing point design, the wheel roller design allows for finer adjustments, gives the best clutch or brake response..
MZS ADVANTAGE - This touch feel high texture matte finish surface levers can make your fingers feel perfectly on the levers. High quality anodized CNC short levers increases durability and hardness, and with beautiful glossy and vibrant finish..
HIGH QUALITY COMPONENTS - MZS wheel levers use chrome steel precision sealed bearings, stainless steel pivot and bushing parts, chrome silicon cantilever springs, CNC billet 6061 aluminum and chromoly fasteners..

Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

FVIEXE 4PCS Acetal Copolymer Round Rod, Acetal Rod Opaque Black, 1 Inch Diameter and 12 Inch Length, Standard Tolerance, Acetal Rod Perfect for Non-Marring Fixtures

Size: 0.98inch/2.5cm diameter x 11.81inch/30cm long..
Highly Machinable: High-quality acetal copolymer rod, an engineering thermoplastic polymer with good strength and stiffness, which is easily processed using machine and yields products of even sizes. Resistant to high temperatures make it won't become gummy during the machining process..
Chemical-Resistant: Among different types of acetals, acetal copolymer is highly resistant to various chemicals (highly alkaline-resistant),heat,and water and it doesn't easily deteriorate or wear in wet environments..
Wide Application: 1 inch acetal rod can act as lubricated parts, decorated parts, precision instruments, bearings gears, pumps, and insulated shells replacing of bronze, copper alloy, zinc, aluminum, steel and other metals..
What You Get: You will receive 4 pieces opaque black acetal copolymer round rod, sufficient quantity to meet your different needs..

Check Stock