ReviewsAluminum Stud

Youliang 10PCS Bleed Fitting Rubber Cap for Bike Hydraulic Disc Brake, Black

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 5 Pieces = 1Pcs 12inch Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), 4 Pcs Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

TriRock Outdoor Quick Detach Cam Lock Bipod Sling Adapter for 20mm Picatinny Weaver Rails

  • Quick Detach Cam Lock design for easy and Fast installation and release.
  • Fit for Standard 20mm Picatinny Rail & Weaver Rail such as Ras,RIS rails.
  • Works with Harris Bipods and other bipods which mount onto standard Sling Stud.
  • Built with Rotatable Sling Stud that is perfect for mounting bipods or attaching Sling Swivels.
  • Made of High Quality Aluminum and black matt finished.
Check Stock

CVLIFE Rifle Bipod, 6-9 Inch Adjustable Super Duty Tactical Bipod (Aluminum)

  • Adjustable leg length (5 settings) with return Springs, you could adjust the length to meet different needs when hunting..
  • Press the button,the legs can eject fully and quickly.The length of legs can be adjusted from 6-9 inches..
  • Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight..
  • Durable with new design high quality that you can quickly attaches to sling swivel stud..
  • Applicable for sling swivel stud rifle. No adapter..
Check Stock

CRAFTSMAN Stud Finder, 3/4-Inch Depth (CMHT77633) + CRAFTSMAN Torpedo Level, 9-Inch (CMHT82390)

  • Depth range of 3/4 inch through drywall, works on surfaces covered in wallpaper and fabric.
  • Edge detection to locate stud edges of both wood and metal stud.
  • Shock resistant and water resistant body for durability and long life.
  • 1) magnified center block vial for durability and accuracy.
  • 2) extruded aluminum body for strength and lightweight.
  • 3) over-molded rubber end caps for non-marring leveling and shock resistance.
Check Stock

Thread Checker Lug Nut & Wheel Stud SWTC-LN8 Bundle with a Lumintrail Keychain Light

  • Lug Nut Thread Checker - Each size has a lug nut and wheel stud checker on the same gauge. Thread sizes are permanently stamped onto each gauge..
  • Wire Cable Thread Checker - The individual gauges rotate freely on the wire cable for fast thread verification..
  • Durable Tools - Built to last & manufactured from high grade aluminum..
  • The Lug Nut Thread Checker is an accurate and easy-to-use thread identifier for both lug nuts and wheel studs. Each individual gauge features a male threaded stud on one end to measure lug nut threads and a female threaded hole on the other to measure wheel stud threads..
  • Thread Gauge Size Specifications by Color: M14 x 2.00 - Gold.
  • 1/2-20 - Black. Bundle with a Lumintrail Keychain Light.
Check Stock

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack

  • This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track..
  • RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
  • The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
  • Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough ....
Check Stock

TEMCo THA032 1/2 Conduit Punch and Die For Hydraulic Knock Out Driver

  • Conduit Fitting Size: 1/2", Actual Hole Size: 0.86".
  • Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430" (10.90mm) NOTE: This die set DOES NOT have threads..
  • Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
  • Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....
Check Stock

New Generation Locking Deluxe M14/M1a Scope Mount Mil Spec Light Weight One Piece Design

  • Sadlak Industries M14/M1A Light Duty Aluminum Front Rail QD Stud.
  • Once the Front Rail is installed you have flexibility of attaching a clamp-on type Bi-Pod or, with Front Rail with QD Stud a Harris QD type bipod..
  • All hardware and screws have mil-spec. Manganese Phosphate finish..
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 8 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 8 Pieces = QTY 4: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

JINSE Bipod for Picatinny Rail Foldable Swivel Adjustable Low-Profile 6.2-6.7 Inches Bipod with Swivel-Stud Adaptor

  • Durable aluminum construction with rubber stand.
  • Unique internal spring system provide extremely solid, prevent tipping.
  • Swivel stud mounting adapter to mount the bipod to a swivel stud.
  • Picatinny mount designed to mount on a Picatinny rail.
  • Adjustable leg length: 2 settings for different length, center height 6.2"-6.7".
Check Stock