ReviewsAluminum Window Drilling Machine

1 White Recessed Screw Terminal Block Door Contacts NC Alarm Door Window Sensors with Magnetic Reed Switch. These 38 Door Contact Position switches DCS Work

[Automatic Vent Opener]-- As the temperature changes automatically, this auto thermo for window maintains the best growing temperature and prevents your greenhouse from overheating.
[Greenhouse Helper]-- With this greenhouse vent autovent it can prevent greenhouse overheating. Ideal for your greenhouse window--opens and closes your greenhouse window. Start to open - 15°c - 25°c (60°-77F).
Fully open temperature 35° (19f) or above.
[Solar Energy]-- Non electric, uses solar energy, open or close the greenhouse vents as temperature rises or drops. This solar heat sensitive vent opener can lift up to 15 lbs. the cylinder closes well before deep freezing and opens again with no problem..
[Premium Quality]-- This solar heat sensitive adopted elongated aluminum cylinder with paint spraying, weather resistant. Aluminum frame looks more lustrous, durable and rust-proof..
[Warm Tips]-- Do not use this opener anywhere the temperature will exceed 45° (122F). To use with the greenhouse, you need to use the drilling tools to screw into the channel and fix it..

Check Stock

Apex HA-RACK-ALUM Adjustable Headache Rack

Fits most pickup truck beds from 53" to 71" wide with a removable ladder rack extension.
Mesh design protects your window without obstructing your view.
Includes installation hardware, two tie-down cleats, and allen bolts for tightening the adjustable rack.
Manufactured from lightweight aluminum with a black powder coated finish.
Installation requires drilling into truck bed.

Check Stock

ROBTLE Automatic Vent Opener Lifts Solar Heat Sensitive Automatic Greenhouse Window Opener Greenhouse Roof Vent Opener Easy Assemble Auto Vent Kit for Palram Greenhouse 15 Lbs

Designed for : With this greenhouse vent autovent it can prevent greenhouse overheating. Ideal for your greenhouse window--opens and closes your....
Weather Resistant : This solar heat sensitive adopted elongated aluminum cylinder with paint spraying, weather resistant. Aluminum frame looks more....
Prevents Your Greenhouse from Overheating : As the temperature changes automatically, this auto thermo for window maintains the best growing....
Solar Energy Powered : Non electric, uses solar energy, open or close the greenhouse vents as temperature rises or drops. This solar heat sensitive....
Warm Tips : Do not use this opener anywhere the temperature will exceed 45° (122F). To use with the palram greenhouse, you need to use the drilling....

Check Stock

Smittybilt (2784 8.2' x 6.2' Tent Awning

Features: Marine Grade 600D Rip-Stop Polyester Water Proof Body, 420D Polyester Oxford Waterproof Rain Fly, 110g Fade-less Gaze Breathable Windows, High Density Foam Mattress with Cover, Insulated Base, Stainless Steel Hardware, 550g Transportation Cover and Telescoping Ladder..
What’s Included: Insulated Base With Stainless Hinges and Anodized Aluminum Poles, Khaki Tent Body, Coffee Rain Fly, Foam Mattress With Cotton Cover, Window Rods, Adjustable Ladder 81”, Aluminum Crossbars To Mount To Rack, Stainless Steel Hardware, Tie Downs and Transportation Cover..
Fitment: Anything with a factory or aftermarket roof rack. Please confirm rack weight capacity prior if you’re unsure..
Installation: Requires no drilling or modification to your vehicle if equipped with factory or aftermarket roof rack..

Check Stock

CHUNILLE Metal Drilling Machine, High Speed 340W Precision Drill Press Bench Workbench DIY Mini Metal Wood Drilling Machine 16000RPM 1-10mm Electric Workbench

...cs, making the trigger handle easier and more comfortable. The desktop design and the way to push the handle for operation are more time-saving and labor-saving. It is easier to operate than a hand-held drill..
[Widely Used] This product is mainly used for commerce, such as drilling wood, plastic board, resin board, aluminum, composite board and other non rigid materials in the market. It can also be used for home use, such as DIY or furniture installation..
[High Efficiency] Since it uses an all copper motor, the noise can be minimized when the machine is running. This mini bench drilling machine provides most of the small size functions that large bench drilling machines can provide, saving you a lot of workshop space and adding a highlight to your workbench..
[Speed Adjustable] You can operate at a proper and accurate speed, which will be more efficient and accurate. With speed regulation function, the first gear is 0-8000r/Min, the second gear is 0-11000r/Min, and the last gear is 0-16000r/Min..

Check Stock

HSS Hole Saw Kits for Metal, Rocaris 23 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 16~100mm

【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life..
【Top Quality】Made of High Speed Steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling..
【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..

Check Stock

Power Tool Essentials - The Drill Press & Mortiser

IP66 Water Proof: Led Work light is made of high-quality aluminum alloy light head, Added water proof rubber ring, It can protect against the water spray generated by the machine..
Power and voltage: Input voltage range is 110 to 220V, of course can input 120V.
120 LEDs,30W luminous flux is 3000 lumens, longer life than halogen lamps, more energy saving..
Flexible bracket: Two-section aluminum alloy bracket, approximately 20 inches in length, with three rotatable nodes that adjust the direction of illumination..
Mounting type: fixed by four screws and equipped with mounting parts to make it more stable and safer. Hole diameter 5mm (0.2 inch).
Scope of application: Suitable for all types of machine tools, Such as CNC, Punching, Lathe, Drilling machine, Car repair shop, Equipment, Machinery workshop, Woodworking workbench, Sewing machine..

Check Stock

EWANYO 3-Speed Benchtop Drill Press, Electric Bench Wood Drilling Machine for DIY Creation, Small and Precise Work Like Jewelry Making Woodworking Metal Drilling Machine 110V

...ling machine motor copper. Adopting imported bearings, high temperature and full copper wire processing, shell adopts nylon plastic processing. Suitable for drilling, expanding, and reaming operations on metals and other materials..
【Various Material Applicable】Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling.Can also be used for DIY furniture, work easily, drilling holes more accurately..

Check Stock

WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper

SPEED RANGE:Infinite speed selection within the machine's six speed ranges(0-2800r/min)..
STRONG AND DURABLE:Adopts metal material and surface paint treatment, strong and durable, corrosion resistant and not easy to rust..
EASY TO OPERATION:High quality, easy to operate with great speed, low noise, good stability and high efficiency..
ADJUSTABLE:Precision and tightness can be adjusted easily through a knob according to different demands..
WIDELY APPLIATION:This metal milling machine can mainly be used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling. Can also be used for DIY furniture, work easily and accurately, achieving any drilling effect you desire, very practical..

Check Stock

LC LICTOP 2GT Aluminum Timing Belt Idler Pulley GT2 5mm Bore 6mm Width Toothless for 3D Printer Timing Belt,Pack of 10

✔ Product Contain: 10 x Timing belt pulleys.
✔ Product Size: Drilling diameter: 5mm/0.2", Sutible for GT2 6mm/0.24" wide timing belt..
✔ Product Material: Aluminum, surface oxidation treatment, effective rust prevention, anti-corrosion.
✔ Product Features: Double bearings: Use high quality motor grade bearings to ensure good machine operation..
✔ Applications: Widely used in milling machines, gear forming machines, drilling machines, CNC machine tools, hobbing machines or other mechanical transmission applications..

Check Stock

Zenna Home Shower Rod, 26-76-inch, Brushed Nickel

MADE OF RUSTPROOF ALUMINUM FOR LONG-LASTING USE: Adjustable shower rod boasts lightweight and strong aluminum construction that is guaranteed for life against rust.
TENSION ROD EXPANDS TO PROVIDE A STRONG HOLD.
GREAT FOR USE IN MULTIPLE ROOMS: Innovative adjustable-length shower rod has a versatile 50-inch range to fit spaces from 26 to 76 inches.
use it in any standard or stall-sized tub or shower enclosure, or in window spaces or for closet organization.
EASY AND SECURE INSTALLATION WITH NO TOOLS: Tension-mount technology means installation is easy and tool-free, with no drilling and no damage to your walls.
NO CUTTING NEEDED: Easy-to-follow instructions included, and no cutting is required for any installation length.
ATTRACTIVE BRUSHED NICKEL FINISH: Brushed nickel finish complements your bath décor and furniture choices.

Check Stock