ReviewsAluminum zinc Steel Coil

SA-8 V.3 D2 - PAIR Sundown Audio 8' 500W Each RMS Dual 2-Ohm SA Subwoofer

  • Xmax = 14mm one-way by 70% BL | RMS Power = 300-watts | Vented magnetic gap.
  • Solid Pole piece with chamfered edges for increased air powered voice coil cooling | Black Aluminum 2” voice coil former for superior heat dissipation.
  • High Temperature copper voice coil wire | Spring Loaded Terminals.
  • Stitched-On Tinsel Leads to prevent fatigue and failure | High strength stamped steel frame.
Check Stock

#8 x 3/4' Hex Washer Head Self-Drilling Tek Screw Zinc Plated Steel for Attaches Sheet Metal Steel or Steel to Metal - Box of 100

  • HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear.
  • RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener.
  • CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications.
  • For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal or Aluminum to Metal or Aluminum. Installed with #2 Phillips Driver.
  • Amazon Protected Money-Back Satisfaction Guaranteed.
Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificatio....
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock

#8 x 1/2\ Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches Wire Lath to Metal Studs - Box of 100

  • HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear.
  • RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener.
  • CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications.
  • For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal or Aluminum to Metal or Aluminum. Installed with #2 Phillips Driver.
  • Amazon Protected Money-Back Satisfaction Guaranteed.
Check Stock

Dark Repulser Great Sword of Kirito Costume Replica

  • Overall Length: 40 Inches (In Sheath) / Blade Length: 33 Inches.
  • Blade Width: 4 Inches / Blade Material: Carbon Steel (Edged but not Razor Sharp).
  • Blade Thickness: 3 mm / Handle Length: 10 Inches.
  • Handle Material: ABS, Zinc Aluminum / Guard Width: 9.75 Inches.
  • Guard Material: Zinc Aluminum with Faux Gem / Scabbard: Faux Leather Sheath with Nylon Straps.
Check Stock

MedievalDepot Dark Repulser SAO Great Sword of Kirito

  • Blade - 33 Inches, 4 Inches Wide, 3 mm Thick, Carbon Steel.
  • Guard - 9.75 Inches Wide, Zinc Aluminum with Faux Gem.
  • Scabbard: Faux Leather Sheath with Nylon Straps.
Check Stock

GATE Caster Wheel 8-Inch Spring-Loaded Gate Caster, 275 lb. Capacity, Solid Rubber Tire, 360 Degree Rotation, Heavy-Duty Commercial Agricultural Grade, Universal Mount, by Tech Team

  • For use on heavy wood, cyclone, tubular steel pipe, or agricultural farm gates..
  • The 4.8” coil spring with 5mm diameter tempered steel wire provides 1.375” (35 mm) of vertical suspension compression travel acts like a shock absorber to automatically adjust height for travel over uneven surfaces. The 8” diameter flat free tire means that it stays round and rolling freely even in the dead of winter and eliminates gate sagging and maintains a level gate..
  • The gate wheel caster rotates a full 360 degrees on a heavy duty 3.5” industrial grade ball bearing assembly to travel in any direction. The universal fit 5.7mm thick zinc plated steel mounting bracket has two 11.5mm / .45” mounting holes for solid attachment to wood, cyclone, metal or tubular steel pipe agricultural gates..
  • The 8” x 1.875” flat free solid rubber tire is fitted to a stamped steel rust resistant zinc electroplated hub with 6 reinforcing rivets and 2 sets of ball bearings riding on a ½” steel axel..
Check Stock

3'/4' Drop Lowering Kit with Spindles For 1982-2004 Chevy S10 4CYL 2WD by TSS

  • Compatible with 1982-2004 Chevy S10 2WD 4-CYLINDER.
  • FRONT: MaxTrac 1" Drop Coil Springs, MaxTrac 2" Ductile Cast Iron Drop Spindles / Knuckles.
  • REAR: 4" Aluminum Angled Drop Blocks, (4) Zinc Coated U-bolts.
  • NOTE: 4X2 2WD model required. 4-CYLINDER model required.
  • The Suspension Specialists is an American company with fast shipping, technical support available, and products you can count on. Please see our description for further details, or contact us for assistance.
Check Stock

CN81204 Aftermarket Piston Driver for Max CN70 Coil Nailer Parts

  • CN81204 Aftermarket Piston Driver For Max CN70 Coil Nailer..
  • Mechanically locked piston driver interface..
  • This professional piston drive is for MAX CN70 coil nailer..
  • Heat treated S7 steel at the tip of the piston to Rockwell hardness of 55~56. The cap end is at about 52..
  • The piston driver cap is made of Aerospace Aluminum grade 7075..
Check Stock

Pyle-Pro PDMIK2 Professional Moving Coil Dynamic Handheld Microphone

  • Moving Coil Dynamic Uni-Directional Element - Microphone Sensitivity: -54db (+/-)3db(0dB=1V/Pa @ 1KHz).
  • Durable Zinc Alloy Metal Construction - On/Off Broadcasting Switch.
  • Steel Mesh Ball Shaped Grill - 16.4 Foot x 6.5mm Microphone cable with 600 Ohms Outputs.
  • Frequency Response: 50Hz~15KHz - Microphone Dimensions : 7.7'' x 0.8'' x 1.0''.
Check Stock