ReviewsAm Tft Lcd Touch

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..

Check Stock

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers.
✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen..
✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..

Check Stock

sb components 3.2\ TFT LCD Transparent Case for Raspberry Pi 2 and Raspberry Pi 3 (Black)

This is a no-nonsense protective case for 3.2" TFT LCD for Raspberry Pi 3 Model B.
The case is a three-piece injection-moulded ABS enclosure that snaps together around 3.2" TFT LCD and Raspberry Pi 2.
It provides the best available protection/accessibility for 3.2" TFT LCD and Raspberry Pi 2 Model B.
Wall Mountable. Access to all Pi 2 consumer ports..

Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..

Check Stock

Monland 880 3D Printer MKS Gen-L V1.0 Controller Board 1Pas MKS Integrated Mainboard Motherboard Compatible with Ramps1.4

2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users....
Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the....
24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the....

Check Stock

BIGTREETECH Upgrade PITFT50 V2.0 Graphic Smart Display DSI Interface 5 inch LCD Touch Screen Suitable for Raspberry Pi

1) This is a 5-inch LCD touch screen with a resolution of 800 x 480 for Raspberry-Pi. The display area can reach 108 x 64.8mm..
2) Adapt to the Raspberry-Pi DSI display interface, directly driven by DSI.
with a capacitive touch panel. Supports 5-point touch..
3) The unique hole design on the back allows you to install the Raspberry-Pi directly. PI TFT50 display adopts Raspberry-Pi power supply design, no external power supply is needed..
4) The PI TFT50 display supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen..
5) If you encounter any problems after receiving the product, please contact us via Amazon. We have professional technical after-sales personnel to solve your problems. Thanks for your cooperation..

Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..

Check Stock

ZHONGJI Touch Full Flat Screen PC Retail Point of Sale System Cash Register with Installed Thermal Receipt Printer, Cash Box for SMEs,Restaurant and Bars

【NOTICE BOARD】:We only installed the not activated windows 10 pro version and not activated pos software.
【POS SYSTEM 】 : Intel Celeron K1900 Dual Core 2.4GHz / 64G SSD / 4GB RAM / 15” 5-Wire Resistive TFT LCD Touch Screen（Main Display）/ 15'' TFT LCD(Customer Display)..
【PROFESSIONAL THERMAL PRINTER】: 80mm Thermal Receipt Printer , Auto Full or Half Cut, Support logo printing.
【STELL HEAVY DUTY RJ45 CASH DRAWER】 :Spring-loaded steel bill clips,5-coin compartments,3-position lock,RJ11 Crystal phone jack, quality guaranteed steel..
【EXTRA BONUS FREE OF CHARGE 】: life long after sale service, High quality cash register thermal paper X 10 Rolls, Keyboard X 1 Piece, Mouse X 1 Piece..

Check Stock

Handheld Multi-Channel Temperature Meter with LCD Display Touch Screen 8 Channels Portable Thermometer Thermocouple Temperature Meter

★ TFT-LCD True-color LCD display, touch screen.
★ Cold Junction Compensation, Mini-USB interface.
★ The function of broken thermocouple checking.

Check Stock

SVP 20 Megapixel Digital Waterproof Camera Series (Aqua8800-orange)

Support system: WinXP, Vista32/64 Win7&Win8 32/64 and Mac OS X 10.6.19 or above.

Check Stock

ciciglow Video Door Phone Doorbell, 7in TFT Wired Video Intercom System Touch Button Night Vision Video Intercom Monitor Home Security System with IR Cut HD 1000TVL Camera(US Plug)

TFT LCD Screen: This intercom doorbell adopts 7 inch color TFT LCD screen with high definition display and high sensitivity touch control..
25 Ringtones: There is 25 doorbell ringtones optional, and the volume, brightness and contrast are adjustable..
Infrared LED Light: Equipped with infrared LED light, more convenient for evening use, see the visitors clearly in the night..
Water Proof: Designed with rain cover, no need to worry getting damaged in the rain, aluminum alloy is anti oxidation, ensuring years of use..
Safe and Beautiful: The intercom doorbell has no radiation and low power consumption, indoor and outdoor unit are all piano paint panels, fashionable and luxurious..

Check Stock