ReviewsAmplifier Output

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Universal RCA Level Controller Car Amplifier Audio RCA Amplifier Gain Level Bass Amplifier Volume Control Knob Sub Amp Volume Control Cable for Car, Motorcycle, Speakers, Home Theater(2022 Version)

  • This RCA amplifier controller offers high-quality signal transmission with RCA composite cables.Made from high quality materials and metal for optimal signal transfer.Adds subwoof level control to any head unit. Perfect for balancing the system to change music style.
  • Simple Connection: the Rca Volume Control RCA output connector to the car stereo and the input RCA connector to the device, no additional wires are required. With RCA composite cables,this amplifier controller offers high-quality signal transmission.Adds subwoof level control to any head unit or balances a multiple amplifier installation.
  • RCA amplifier is control the gain level / volume of devices connected to the car stereo, such as speaker, amplifier, bass, etc. Dash Mount Amplifier Level Control for Volume Adjustment. dash mount rca amplifier level control is used to adjust amplifier gain, power level, stereo, equalizer or crossover volume when you driving.
  • Perfect for balancing the system to change music styles, control your sub-woofer output, you can set the subwoofer on maximum gain and then vary the knob to taste as per genre or media good fit for Car, Motorcycle, Speakers, Home.Stereo RCA input and output. Simple in and out connections,no additional wiring needed.Mini size easy to i....
Check Stock

Hifonics BG-2500.1D BRUTUS Gamma 2500 Watt Mono Car Audio Amplifier Class D Amp Bundle with Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's

  • Package Includes: (1) Hifonics BG-2500.1D BRUTUS Gamma 2500 Watt Mono Car Audio Amplifier Class D Amp. (1)Engauge by Memphis KIT0 0 Gauge Amplifier Amp Installation Wire Kit 17 ft. RCAs. Features: Low Noise Preamplifier Circuit: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion. RCA Inputs: Nickel-plated RCA jacks create the most effiecient High/Low Level audio connection and resist corrosion. Operation Mode: Mono only.
  • Crossover Type: Variable electronic crossovers allow for complete control of the sound. Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers..
  • Class/Topology: Super D-Class designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs..
  • Output Device Technology: Pro-Fi Output Device Technology, The U....
Check Stock

Pyle PLVHL70 2-Channel High-Level To Low-Level Converter with 12V Remote Turn-On

  • RCA FUNCTION HIGH TO LOW: The Converter allows you to get RCA line level outputs from your high-level output device. It also can convert the high-voltage signal output of the amplifier or speaker to the low-voltage signal, improve sound quality.
  • ADJUSTABLE ATTENUATION: Provide the level gain adjustment. Use the adjustment rotate button, you can adjust the bass down without having to pull over and manually adjust the input level of the amplifier to the minimal one, very convenience.
  • HIGH-QUALITY SOUND: No need to worry about interrupted sound, static or loss of quality during an important event because this cable is made with highly durable construction and delivers premium performance without noise, static, or buzzing.
  • EASY TO INSTALL: Provides amplifier remote turn-on output w/out removing car stereo. Just connect the wire between the speaker & the amplifier. Red input.
  • Connect to the amp line of the right channel. White input.
  • MAXIMUM INPUT POWER: Constructed from durable aluminum alloy. 45W per channel.
Check Stock

Rockville RCS180-6 180 Watt 6 Zone 70V Commercial/Restaurant Amplifier/Bluetooth

  • Rockville RCS180-6 180 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth.
  • Rockville rcs180-6350 watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 Volt, 8ohm, and 4 ohm. 70/100 volt RMS power: 184 watts. 4-16 ohm binding post speaker output..
  • 6-Zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max)..
  • (2) sets RCA aux inputs. (3) mic inputs. Rca line output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 ohm red positive speaker output terminal. Shared negative speaker output terminal.
  • Power requirements: 120V/ 50-60Hz. A weighted signal to noise (@ 1W) -68.1Dba. A weighted signal to noise (referenced to full 4 ohm power) -89.2Dba. Frequency response: 49Hz to 14.9 kHz. Frequency response VS thd+m (worst case across normal bandwidth 1W @ 8 ohms: 0.89%. weight: 22.7lbs. Dimensions: 19” x 16” x 4” inches.
Check Stock

Hifonics ZG-1800.1D ZEUS Gamma 1800w Car Audio Class D Mono Amplifier+Amp Kit

  • Package Includes: (1) Hifonics ZG-1800.1D ZEUS Gamma 1800 Watt Mono Amplifier Car Audio Class D Amp, (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's.
  • Features of ZG-1800.1D: Low Noise Preamplifier Circuit: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion, RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant, High Level Inputs: Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power, Operation Mode: Mono only.
  • Crossover Type: Onboard electronic crossover, Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers, Class/Topology: "Class D, High efficiency with big power in a small footprint, Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation, Heat Sink: Aluminum, Old School Hifonics Heat sink for Superior Heat Dissipation..
  • Power Supply: Simpatico Coil Design, The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices, Output Connecti....
Check Stock

Fosi Audio DA2120A Bluetooth 5.0 DAC Hi-Fi Stereo Receiver Audio Amplifier Support aptX 2.1 CH Integrated Class D Digital Power Amp for Passive Speakers Active Subwoofer with Remote Control

  • 2.1 Channel Hifi DAC Amplifier Support 24bit/192Khz Audio with EQ Control. 100Watts Class D power amp(50Watt [email protected]) with low-pass power subwoofer output and passive speakers output can drive most home speakers. Easy to build your home theater systems and enjoy Hi-Fi music with DA2120A..
  • Multiple Input Modes. DA2120A wireless stereo amplifier supporting PC-USB/Optical/Coaxial/3.5MM AUX/Bluetooth 5.0 input can fit with most home Hi-Fi sound systems. Note: Optical interface does not support Dolby/DST audio..
  • DA2120A adopts the Texas Instruments NE5532 operational amplifier chip. The DA2120A are high-performance operational amplifier combining excellent DC and AC characteristics, featuring very low noise, high output-drive capability, high unity-gain, maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. NE5532 are compensated internally for unity-gain operation, with specified maximum limits for equivalent input noise voltage..
  • DA2120A with Advanced Digital Amplify Circuits that all analog signals are converted to a digital signal to make the PHASE of input and output signal keep same. Phase shift is zero. Strong anti-interference ability. High efficiency up to 99%..
Check Stock

RockJam 10 Watt Electric Guitar Amplifier with Headphone Input Three-Band EQ Overdrive & Gain Power Black RJ10WAR2

  • Wattage: This RockJam electric guitar amplifier is a true 10watt RMS amp, ideal for both practicing and small performances..
  • Equaliser: With a three-band equaliser, Bass, Treble & Middle you can balance the output your amp according to your playing style and environment..
  • Guitar Amplifier With Effects: With both overdrive and gain functions, this guitar amplifier will allow you to truly personalise your sound..
  • Input & Output: With a 6.55mm headphone output, this guitar amp will allow you practice in private and with it's universal input it can be easily used....
  • Portable: Weighing in at 4.2 KG and coming with a handy carry handle, this amplifier is great for taking on the move..
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • ...150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to ....
Check Stock

Nobsound Auto Car Amplifier Audio Subwoofer Bass Control Knob Sub Gain Equalizer Regulator Frequency Controller RCA Line Level Adjust

  • This remote amplifier level control adds sub-woofer level controls or balances a multiple amplifier installation.
  • Fine tunes the volume of any RCA line level signal you wish to control.
  • Connect the RCA from the output of this controller to the amplifier, and wire the car stereo output to the RCA input of this unit.
  • Dash mount amplifier level control for Volume Adjustment.
  • Can adjust the amplifier gain while driving.
  • Perfect for balancing the system to change music styles.
  • Simple in and out connections, no additional wiring needed.
Check Stock

DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp

  • tpa3116 amplifier 100W Subwoofer Amplifier Board.
  • Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
  • tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
  • This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
  • bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
  • Speaker impedance: bass speaker impedance: 2-8 ohm.
  • You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.
Check Stock