ReviewsAnalog Oscilloscope

2 in 1 Digital Oscilloscope Multimeter, Scope Meter with 2.5 Msps High Sampling, 2.4 Inch Color Screen, Automatic Waveform Capture Function, DC/AC Voltage/Current Frequency Resistance Diode Test

  • ...re Accuracy & Efficient: Dedicated chip, high speeds sampling rate and high bandwidth, automatic waveform capture function, one-key transform to waveform function furing measuring, software calibration technology,memory calibration coefficients, to improve your work efficiency..
  • With Multimeter Function: This 2 in 1 oscilloscope multimeter is suitable for diagnosing automotive, industrial and household electrical problems. This electrical tester is auto-ranging and 4000 counts, can accurately measure AC/DC voltage, resistance, AC/DC current, capacitance, frequency, diodes, continuity..
  • One-button oscilloscope: no need oscilloscope probe, measuring waveform directly. Fast and accurate measurement, clear waveform display. 3 waveform scanning modes: automatic/conventional/single. Mass storage, 100 data/10 waveforms..
  • Support Multi Waveform Parameters: When measuring waveforms, you can set parameters independently, such as: time base, amplitude, waveform scanning mode, etc..
  • LED Backlight & Storage / Readout -Analog broadband range up to: DC/AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240x320 color screen with LED backlight which is always on.More clear and suitable for working at night..
Check Stock

BJT Transistor IV Curve Tracer Adapter PCB Board X-Y Oscilloscopes

  • Generate IV curve to 2 CH Analog or Digital Oscilloscope in x-y mode.
  • Ib = 0uA,24uA,48uA,72uA,96uA,120uA,144uA,168uA for small transistor.
  • Ib = 0.0mA,0.32mA,0.64mA,0.96mA,1.28mA,1.6mA,1.92mA,2.24mA for power transitor.
  • Vce = +10V for NPN transistor and Vce = -10V for PNP transistor / PCB size 9.0cm x 10.0cm.
Check Stock

Rigol MSO5074 LA KIT - Four Channel, 70 MHz Mixed Signal Oscilloscope with PLA2216 Logic Probe

  • 70 MHz MSO with 4 channels, 8GS/s, 100Mpoint memory and PLA2216 logic probe.
  • Four channel (2 analog 2 digital) 70 MHz mixed signal oscilloscope.
  • This package includes a PLA2216 logic probe.
  • 100 Mpts memory depth, optional memory depth up to 200 Mpts.
Check Stock

Hantek DSO4102C Digital Multimeter Oscilloscope USB 100MHz 2 Channels LCD Display Waveform Generator

  • 4 analog channels, 1GSa/s real-time sampling rate and 70MHz bandwidth, USB2.0 Interface, plug and play device.
  • The operation interface is similar to banchtop oscilloscope, easy to operate with high cost performance.
  • Good mechanical design with small size which is easy for carrying.
  • One computer could connect with multiple oscilloscopes, expand the channel number easily.
  • More than 20 kinds of automatic measurement function, Software support: Windows10, Windows 8, Windows 7.
Check Stock

Hantek 6022BL 48MSa/s 16CH PC USB Digital Storage Oscilloscope Logic Analyzer

  • It has 4 analog channels, 1GSa/s real-time sampling rate, 70MHz bandwidth, USB2.0 Interface, plug and play device.
  • The operation interface is similar to banchtop oscilloscope, easy to operate with high cost performance.
  • Good mechanical design with small size which is easy for carrying.
  • One computer could connect with multiple oscilloscopes, expand the channel number easily.
  • More than 20 kinds of automatic measurement function, with Arb. waveform generator, Software support: Windows10, Windows 8, Windows 7.
Check Stock

P4250 Oscilloscope Probe High-Voltage Probe Oscilloscope Probe BNC Oscilloscope Scope Clip Probe Test Lead Kit

  • DETACHABLE HOOK TIP: The oscilloscope scope clip probe has detachable hook tip, the hook is well protected by the plastic case.
  • HIGH PRECISION: Oscilloscope probe has insulated BNC head, high precision, suitable for all standard BNC head oscilloscope.
  • EASY TO USE: Oscilloscope clip probes have compact size, several functions combined in one, this probe is convenient to use.
  • STABLE PERFORMANCE: Locating sleeves of oscilloscope passive probes ensure the stability and reliability of the tip exposed to the test point.
  • PRACTICAL: Marker rings of digital oscilloscope clip probe in different colors help to identify different channels.
Check Stock

OWON Oscilloscope HDS272 2 in 1 2CH Digital Handheld Oscilloscope Multiumeter 3.5\ LCD 70MHz Bandwidth 20000 Counts Multiumeter OSC+DMM+for Automobile Maintenance,Power Detection

  • Parameter---HDS272 3.5 inch LCD automotive oscilloscope with 2 channel (oscilloscope+multimeter), 70MHz bandwidth, 250MS/s sample rate, 8K record length.
  • 2-in-1---2CH digital oscilloscope with 2 in 1 function, portable oscilloscope built-in multimeter is very handy. You can work well done with one device for your jobs or your experiments. At the same time, its detection date is very accurate, 20,000 count DMM, Scope update rate at 10k/s, perfect ranges of sweep time and vertical scales..
  • Crisp and Portable---Crisp and bright 3.5 inch color LCD screen, showing a higher resolution larger character display, even though in dim ambient light situations or outdoor environment, digital oscilloscope can be intuitive in its read. This handheld oscilloscope is portable and comfortably fits in the hand. It is much lighter, easier and perfect for field use. Practical and intuitive menu page layout, it is intuitive and handy in its use..
  • Excellent battery life---Power by standard 4400mAh 18650 Lithium battery, portable oscilloscope can work continuously for about 6 hours, a single battery can supply power normally, which are....
Check Stock

Goupchn Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessories Kit 1X 10X

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 16 x marker rings, 2 x ground wires, 4 x locating sleeves, 1 x adjustment tools, 1 x ground springs, 1 x user manuals, 1 x oscilloscope link adapters..
Check Stock

FNIRSI-1014D Dual-Channel Digital Oscilloscope Includes Signal Generator Function,Built-in 1GB Storage Space,100MHz Analog Bandwidth,1GSa/s Sampling Rate with 100x High Voltage Probe

  • Parameter---HDS272S 3.5 inch LCD handheld oscilloscope with 2+1 channel (oscilloscope+multimeter+generator), 70MHz bandwidth, 250MS/s sample rate, 8K record length.
  • 3-in-1---2+1CH portable oscilloscope built-in multimeter and waveform generators are very convenient, 3 in 1 functional usb oscilloscope, you can get work well done without carrying multiple devices for your jobs. Owing accurate detection function, well triggering ability of waveform generators and useful oscilloscope and 20,000 count DMM..
  • Crisp and Portable---Crisp and bright 3.5 inch color LCD screen, showing a higher resolution larger character display, even though in dim ambient light situations or outdoor environment, digital oscilloscope can be intuitive in its read. This handheld oscilloscope is portable and comfortably fits in the hand. It is much lighter, easier and perfect for field use. Practical and intuitive menu page layout, it is intuitive and handy in its use..
  • Excellent battery life---Power by standard 4400mAh 18650 Lithium battery, portable oscilloscope can work continuously for about 6 hours, a single battery can supply power norm....
Check Stock

Goupchn 500Mhz Oscilloscope Clip Probe 10x P6500B High Precision with Adjust Tool Accessory Kit

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • P6500B probe is a 500MHz oscilloscope probe with a switch for 10x attenuation. It is a good oscilloscope accessory and suitable for BNC interface oscilloscopes..
  • Probe can be used in professional test equipment. It has a 1.3m cable with standard BNC end. It has stable performance and provides several accessories. Adjustment tool can adjust compensation capacitance to match oscilloscopes. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Package include: 1 x probe, 8 x marker rings, 1 x ground wire, 1 x retractable hook tip, 1 x adjustment tool, 1 x ground spring, 1 x BNC adapter..
  • Warranty: Hope you can be satisfied with our oscilloscope probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..
Check Stock

diymore Oscilloscope Case DIY Kit 2.4

  • It is simple to finish assembling the oscilloscope case kit pieces. It does fit like a glove.
  • diymore oscilloscope acrylic case will offer excellent protection while maintaining the beauty of your digital oscilloscope.
  • Note: The Kit doesn't include the oscilloscope, wish you could understand.
  • It is a function of design which this fits, all the parts were cut correctly and fit perfectly when assembled.
  • Acrylic material, looks transparent(need to tear down the film).
Check Stock