ReviewsAnchor Bolt Thread

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

NAXEN 26kN Bolt Hanger Stainless Steel Climbing Hanger Climbing Anchor for 10 mm / 3/8 Bolt Pack of 6

  • Durable Hanger. With stainless steel and vibrated polished, the climbing anchor features corrosion resistant..
  • Sturdy Anchor. The bolt hanger is rated at 26kN, which offers a safe connection point for you..
  • Rounded Edges Design. The clever design offers anti-wear effect when clip carabiner or other gear on the bolt..
  • Large Open. The wide connection hole design facilitates carabiner or any other gears clipping..
  • Available Bolt Diameter: 10 mm / 3/8 in..
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

Retisee 28 Size 4'' x 20'' Bolt and Nut Identifier Gauge Nut Black Bolt Size and Thread Identifier Thread Pitch Gauge Standard Inch and Centimeter Ruler

  • Easy to Identify: 28 size nut and bolt identification tool ruler is easy to distinguish between metric and inch thread sizes, and can verify the sizes and thread pitches of standard hardware, so you don't need to worry about the size of fasteners you have any more.
  • Metric Thread Sizes: -M4 x 0.7 -M5 x 0.8 -M6 x 1.0 -M7 x 1.0 -M8 x 1.0 -M8 x 1.25 -M10 x 1.0 -M10 x 1.25 -M10 x 1.5 -M12 x 1.25 -M12 x 1.5 -M12 x 1.75 -M14 x 1.5 -M14 x 2.0.
  • Bolt Size and Thread Gauge: bolt and nut identifier gauge measures the bolt length and nut diameter quickly, and identifies hardware from #6 to ½" and 4mm to 14mm.
  • Each size has internal thread for bolts and screws, as well as external thread for nuts and washers.
  • The thread gauge is about 4 x 20 inch, which has multiple mounting holes, so you can choose to put it on the workbench, fix it in the toolbox, or install it on the wall.
  • Double Scale: the bolt and nut identifier has inch and centimeter scales on the edge, so you can identify the length of nuts, washers, bolts and screws quickly.
  • Sturdy and Durable: the bolt identifier is made of ....
Check Stock

uxcell® M6x45mm Zinc Plated Hammer Drive Anchor Expansion Bolt Fastener 8pcs

  • Total Length(Not Included Nail): 45mm/1.8".
Check Stock

5/16\ Expansion Shield Anchor Double Zinc Alloy Pk 25

  • ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
  • BOLT EXPANDS ANCHOR-No setting tool required.
  • WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
  • LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.
Check Stock

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
Check Stock

SST Identibolt Bolt and Nut Identifier Gauge

  • "QUICKLY IDENTIFY BOLTS AND NUTS - The SST Identibolt is your One-stop Shop for Verifying the Size and Thread Pitch of All Your Standard Hardware! Never Again Wonder What Size Fastener You Have! Easily Distinguish Between Metric and Inch Thread Sizes, and Quickly Measure Bolt Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)".
  • ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws)..
  • DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!.
  • TWIN RULERS - Inch and Centimeter Rulers on the Bolt Identifier's Edge Help to Quickly Identify the Length of Your Bolt, Screw, Nut, Washer, or Will to Live. Measure Your Hardware Correctly the First Time and Never Make a Second Trip to the Hardware Store Again..
  • UNMATCHED WARRANTY - Masterfully Machined from 6061 A....
Check Stock

Semi Truck Spare Tire (or Tire and Rim) Carrier, Adjustable, Powder Coated, Universal Fit, STAR Fabrication, 3510,

  • Trailer U-Bolt Spare Tire Holder Bracket made of grade 8.8 steel, Zinc Plated, beautiful and practical..
  • U-Bolt Length: 8-1/2'', Width:3-1/4'' - 3-3/4'', Thread Diameter: 7/16-20 UNF, Thread Length: 3''. Fits trailer frames up to 2" or 3" wide.
  • For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2). Thread diameter 7/16-20 UNF..
  • Put bolt around trailer throat and tighten.Tire is mounted along side of trailer protect..
  • The device is very basic, but it fit perfectly around the trailer throat, and also on the tire rim.This carrier easily installs to secure your tires..
  • The kit provides the u-bolt and two nuts. Thread diameter 7/16-20 UNF. Note: Please confirm your tire size..
Check Stock

4 V-Ring Tie Down Anchors | 2\ Diameter Steel Bolt-on D-Rings for Cargo on Trucks, Pickups, Trailers | Flush Mount TieDown Anchor, Replacement for D-Ring Tie-Down w/Plastic Pan Fitting B016YJY7L8

  • ...Toyota TACOMA, you will first need to slightly enlarge the 13/32” mounting holes to fit the bed bolts. Drill it out to a 1/2” and you’re good to go. *These V rings are REPLACEMENT rings for the “D Ring Tie-Down with Plastic Pan Fitting” (B016YJY7L8) we sell. THIS item does NOT include the pan fitting..
  • ✔ ANCHOR ACTION: Trailering your motorcycle or kayak cross-country? Strapping down furniture in your moving truck? Hauling ATVS or dirtbikes to the off-road? Get ready for some ANCHOR ACTION with these versatile and dependable bolt-on tiedowns. Easily secure logistic straps, bungee cords, ropes, soft loops and chains..
  • ✔ HARDY STEEL: 4 pack of 2-1/8" x 2" V-rings with an inner clearance of 1- 5/8" x 1-1/2". Constructed of hardy black powder coated steel, with an attached mounting bracket clip – See mechanical sketch image for detailed dimensions. Assembly break strength of 1,000 pounds..
  • ✔ EASY INSTALLATION: Thread a screw or bolt through the 13/32" diameter bolting hole (that's between 3/8" and 7/16") on the mounting clip and secure to any wood or metal surface. Use in pickup beds and tailgates, cargo vans, utility trailers, enclosed trucks and trailers, flatbeds, SUVs, boats, warehouses, and garages..
Check Stock

Crescent Nicholson 4 Pc. Thread Restoring File Set - T33024

  • Ideal for restoring damaged or worn external threads on bolts and pipes.
  • Thread restoring files can be used with 8 different thread sizes, allowing you to find a true fit effortlessly.
  • 4-piece set offers 3 convenient file sizes for quick and effective application.
  • Color caps on tubes help identify the file type, so you can select the tool you need with ease.
  • Type 2 Red Cap: Ex. Fine/Ex. Coarse Bolt.
  • .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00 mm.
  • Used to restore damage or worn external threads on bolts, pipes, etc..
  • Each thread restoring file will work with 8 different thread sizes.
  • 11-12, 13-14, 16-18, 20-24 TPI Type 2 red cap: Ex. Fine/ex. Coarse bolt.
  • 9-10, 12-16, 20-27, 28-32 TPI Type 7 green cap: Regular pipe.
Check Stock