ReviewsAnchoring Cement

Minn Kota 1810452 Talon Shallow Water Anchor 12 ft Black

  • Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot....
  • User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard....
  • Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness....
  • Talon Remote: Lets you control stow, deploy, anchoring modes, multiple Talon selection and work light.
Check Stock

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
  • 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....
Check Stock

2 Pack Decorative Gutter Downspout Extensions: Rain Gutter Downspout Splash Block, Down Spout Extender, Drain Gutter Guard Diverter, Stakes for Cement Floor and Lawn Included, Matte Black

  • 【DECORATIVE & FUNCTIONALLY 】Concise design, triangular protrusion texture, perfect blend with the lawn and home environment..
  • 【STRONG COMPATIBILITY】The dimensions of this rain gutter splash are as follows: 11'W * 24'L * 2'H. Can be used with any kind of down spout..
  • 【 FIRM ANCHORING】There are 4 pre-made holes in each downspout guard, for stakes to be inserted to hold them in place. In a heavy rain or wind it will not wash away or move..
  • 【 APPLY to ALL LAND TYPES】Consider different usage scenarios, we provide 2 types of stakes: 4*Plastic Stakes are used in garden land, 4*Steel Pegs + Gasket are used in cement floor (each nail is plus one more as a backup)..
  • 【DURABLE & LONG LASTING】Downspout extension is made from ultra-tough and recycled plastic that won't rust or discolor from sun or chemicals..
  • 【EASY to USE】No need for professional installation! Simply place the splash block directly under the gutter downspout and adjust the angle to ensure it slopes down and away from, not toward your house..
  • 【EASY SOLUTION to REROUTING WATER】Directs rain water away from foundation while helping prevent soil erosion, stop the gutters from washing a hole in your yard..
Check Stock

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).
Check Stock

HELIFOUNER 24 Pieces Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall - 1/8 Inch 3/16Inch 1/4Inch

  • ...hich make the product appearance is exquisite..
  • 【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • 【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
  • 【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, it can be installed quickly with a normal screwdriver..
Check Stock

5 X 6 FIBER CEMENT BLADE CARDED

Check Stock

Sika Anchorfix-2, super strength anchoring adhesive, Two component anchor system for threaded bars in uncracked concrete, 10.1 fl. Oz

  • Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive..
  • SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock..
  • USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems..
  • PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces..
  • APPLICATION: Applied with standard guns and by experienced professionals.
Check Stock

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
  • Make sure to mix the paint and cement dry powder first, then add water and stir!.
Check Stock

Edwards 3\ Classic Round Post-Green Sold Per PR

  • CREATE A SPORTS FIELD IN A FLASH: Badminton, Tennis, Football-Tennis, VolleyBall and Water Volleyball. To be Clipped on GARD&ROCK anchoring base (x2 not included).
  • TELESCOPIC POSTS: to set the height of the net up to 6.6 feet (2 meters) and choose your discipline Indexing and rotation locking to adjust net tension and game direction.
  • QUICK FIXATION SYSTEM: to easily and quickly mount and unmount your equipment on any type of flat or sloping ground (lawn, stabilised ground, clay surfaces,etc.) To be Clipped on GARD & ROCK anchoring base (x2).
  • HIGH QUALITY: Anodised Aluminum Net(adjustable from 16,5 to 23ft / 5 to 7m) and STORAGE BAG included PATENTED system.
  • WORKS WITH OTHER GARD & ROCK PRODUCTS: Anchoring base (428-001) / Stand for center pole umbrella (428-002) / Removable stand for side pole umbrella (428-007) / Sunshade post (428-011).
Check Stock

Lewmar Pro Sport 550 12V Windlass for 1/4 G4 Chain Manual Freefall Maximum Pull 550 lbs Port Side Mounted Gypsy for Boats 20 -30 - 2020201167

  • SIMPLIFY ANCHORING— Our windlass moves rope/chain with the push of a button. Anchoring has never been easier with our pro-sports windlass kit designed around a highly efficient spur gearbox, using smaller and powerful magnet motors.
  • EASY TO INSTALL — The Lewmar anchor windlass is quick and easy to install on your boat's deck. It features a Do-It-Yourself above-deck installation and a push button control for easy anchoring.
  • EVERYTHING YOU NEED — The Lewmar windlass has everything needed for a low-profile, anchoring system. The kit includes a windlass, circuit breaker, toggle switch, base gasket seal, mounting studs and installation wrench for power and sailboats 20'-30'and fits a 1/4" G4 chain.
  • COMPACT & DURABLE —The Lewmar horizontal windlass doesn't take up too much room on your boat and looks great on your deck. Constructed with tough composite aluminum, our windlass has a 550 lb. maximum pull, a XXXX motor watt and is ideal for boats under 30'..
  • TRUSTED BRAND — Our windlass kit is from Lewmar, the premiere equipment supplier- designing, manufacturing and distributing innovative, high-quality control solutions worldwide since 1946. Lewmar offers the highest levels of quality in the industry.
Check Stock

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

  • ✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
  • ✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
  • ✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
  • ✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
  • ✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..
Check Stock