ReviewsAngle Fitting Valve

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • Three kinds of valve stem extension（45 degree, 90 degree and 135 degree）successfully solved a series of operations such as inability to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existin....
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
  • Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....
Check Stock

OEM UPGRADE 5221ER1003A 5220FR2006H Washer Water Inlet Valve by Beaquicy - Replacement for Ken-more L-G Washing Machine

  • ✅【IDEAL REPLACEMENT】: ◆5221ER1003A Washing Machine Water Inlet Valve can control the flow of water into the washing machine. There are one inlet (standard hose fitting) and 3 outlets (2 of the outlets face 45 degrees to the right, one outlet faces 45 degrees to the left). This valve is used for cold water fill and pre-wash.◆5220FR2006H Washing Machine Water Inlet Valve for Hot Water controls the water flow into the washer. This inter valve has a standard hose fitting inlet and one water outlet..
  • ✅【OEM UPGRADE IMPROVED】: The package includes 1 x 5221ER1003A Cold Water Inlet Valve, 1 x 5220FR2006H Washer Hot Water Inlet Valve. They are made of durable high-quality materials, well tested by the manufacturer, upgraded and improved on the basis of the OEM, and added metal strainer to the inlet of hose fittings. The standard hose fitting of 5221ER1003A is changed to yellow for better distinction and the main body is in aquamarine blue. The main body of 5220FR2006H is in turquoise green..
  • ✅【WIDE COMPATIBLE】: 5221ER1003A Washer Water Inlet Valve and 5220FR2006H Washer Water Inlet Valve for Hot Water can fit for Ken-more, L-G washing machine. ★5221ER1003A replaces numbers: 5221ER1003C, 5221ER1003D, 5221ER1003F, 4322702, AP5986564,7964153....
Check Stock

Lemfema Propane Refill Adapter Hose 3 FT Stainless Steel Extension Hose with ON-Off Valve for 1 lb Propane Gas Tank Cylinder Bottle QCC1 / Type 1 Propane Bottle Connector

  • 【Outstanding Refilling】Works for refilling 1 pound tank green propane cylinder from 20 pound tanks, great money saver.
  • 【On/off Valve】 A modified valve makes it easier to shut off the propane supply when the 1 lb. tank is full. No need to shut off large gas....
  • 【Big Improvement】 3ft flexible hose makes refilling process easier and more convenient than the short adapter.
  • 【Ease of Use】 You just need to turn the 20lbs tank upside down to get the liquid propane to the bottom.
  • 【Premium Quality】Durable rubber and well sealed 90 degree angle brass fitting ensure leak-free use & safety.
Check Stock

Lichamp R134A Self Sealing Can Tap AC Refrigerant Adapter R134a Can Adapter Valve with Ball Valve and Tank Adapter Fits 1/4 or 1/2 Fitting Hose

  • 134A CANS OPENER KIT -- Automotive air conditioner freon can tap tool for connecting 1/2-16 ACME male fitting cans bottle mounth with ac charging....
  • SELF SEALING STYLE -- Suitable for the latest 50 State compliant self-sealed valve refrigerant container. Before buying, please identify whether the....
  • WIDE APPLICATIONS -- Include extra tank adapter with 1/4 inch female to 1/2 inch male thread fitting makes a easier charging project..
  • EXTRA TENSION HOSE -- Convenient 6 inches tension hose with ball valve for connecting 1/4 inch female fitting hose with 1/4 inch male fitting gauge,....
  • DURABLE AND SAFE -- Enlarged tap handle and lengthened ball valve handle for easy operation, body made of heavy duty brass and premium anodized....
Check Stock

Lichamp A/C R134A Adapters with Puncture 134A Can Tap, AC 134 Quick Coupler Hose Connector Fitting Kit with Tank Adapter and Valve Core Remover, QA02

  • Professional AC R134A freon charging tool kit, come with pair of R-134A adapter, 1-piece ac can tap valve with tank adapter, 1 classic valve core remover..
  • R 134A Adapter, adjustable valve for easy attching and removal without freon leaking, accurate snap lock (5 ball) with knurled grip ring for easy operation, removable copper adapter for longer maintenance, 1/4 inch male fitting compatible with most automotive air conditioner diagnostic AC manifold gauge hose.
  • Can Tap Valve Set, R-134A can tap refrigerant bottle dispenser with 1/4 inch male fitting, extra conversion tank adapter featuring 1/4 inch female to 1/2 inch male fitting, thus this set will fits both 1/4 and 1/2 inch female fittings AC gauge hose.
  • Come with extra automotive high and low pressure side service port valve core removal and installation tool, dual head with thick and thin heads will fits most models.
  • 100% SATISFACTION: If you aren't satisfied with your purchase, contact us through our email at any time you want, and we'll issue you a refund..
Check Stock

Aquascape Dual Union Check Valve 2.0 for Pond, Waterfall and Water Feature Pumps | 48026

  • The innovative AquascapePRO Dual Union Check Valve 2.0 provides a professional pump and plumbing connection inside skimmer filter systems, as well as Pondless Water Vaults..
  • The heavy-duty, swing-style check valve flapper maximizes water flow through the valve when open, while preventing the backflow of water when the pump is shut off or during a power outage..
  • Union connections on both both sides of the valve make pump and filter maintenance quick and easy without the use of tools..
  • Height extendable for larger filters and pumps. Height extendable for installation taller filters.
  • (2) - 2" MPT x 2" Slip Fitting, (1) - 1.5" FPT x 2" Slip Fitting.
Check Stock

Mota Performance A70007 Ball Milled Polished Aluminum Push-In Valve Cover Breather, Round with PCV Tube

  • Washable filter element and replaceable PCV valve and 3/8 inch hose barb fitting included.
Check Stock

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • The HEYTUR inflatable stand up board valve adapter will allow you to connect any standard electric pump, foot pump or compressor to the schrader valve fitting, the standard valve for car and bicycle tires..
  • It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the....
Check Stock

Automatic Adjustable Spring Hydraulic Auto Door Closer Medium/Heavy Duty Designer Residential/Commercial Door Closer. Model DI 100S Silver. Premium and Durable Cast-Iron Construction Materials.

  • STOP SLAMMING DOORS - Fully Adjustable Dual Valve Closing & Latching Speed Control With Door Opening Angle Of Up To 180 Degrees, Sweep Speed Control Valve, Tri-Packed Arms, Pressure Relief Safety Valve - Internal Hydraulic Fluid Reduces Adjustment During Climate Seasons..
  • MODERN & SLICK DESIGN: Advanced technology door closer and the most sexiest and slick piece you have ever seen in this category. Made from high quality metal. Ideal For doors weighing between 132 and 176 pounds. Don't settle for old fashioned door closers! Go for Smart operator with smooth, slow and quiet opener..
  • UNIVERSAL MOUNTING for Right Or Left Swing Doors, up to 180° opening. Hydraulic operated. Works with any type of doors - Wood/Metal or Indoor/Outdoor. Parallel Arm installation compatible. Bracket is sold separately..
  • EASY INSTALLATION: Each of our hydraulic door closure comes with a detailed guide that includes a fitting template and required hardware parts, saving you time and a trip to the general contractor. Watch our exclusive installation video for additional instruction..
  • FULL WARRANTY – SHOP WITH CONFIDENCE: If you are not satisfied with your purchase, please let us know and we will offer you a FULL REFUND or REPLACEMENT.
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock