ReviewsAngle Measuring Protractor

Digital Angle Finder Protractor, Preciva Digital Protractor 7 inch / 400mm Stainless Steel Measuring Ruler with Large LCD Display for Woodworking, Measurement, Construction Angle Measuring Tool

【Large LCD Display & High Precision】 Preciva digital protractor is equipped with a large LCD display for easy reading.
【Locking Function】Convenient locking screw-by pressing the screw, the ruler can be kept at any angle.For maintain its accuracy and read it easily, Preciva angle finder could be locked at any angle..
【2 in 1 Digital Protractor】Digital stainless steel ruler and angle finder combo makes precise measurements.the hinge mechanism on the angle rule allows complete 360-degree measurement of internal and reverse angles.
The protractor combines standard and metric scale scales.Relative and absolute angle measurement..
【Durable Rulers & Low Power Consumption】The digital protractor angle gauge & angle finder durable stainless steel body can be used for a long time.
HOLD and RESET function, laser engraving scale, clear and accurate, will not fall off.In addition, it also has the advantage of energy saving, it will automatically close after 6 minutes of inactivity..
【Battery Included】Large capacity standby with automatic power-off function ,use a CR2032 button battery to work for more than 2000 hours .Saving power consumption and extending battery life..

Check Stock

Mecurate Miter Saw Protractor, Inch/Metric Miter Protractor with Bobble Level, Miter Cut and Single Cut for Crown Molding

【Accurate & Durable 6" Angle Finder】Made by durable ABS plastic, the protractor with accurate laser engraved scales and level bubble. Reliable to measure accurate angles for crown molding and a variety of other carpentry applications..
【Two Measures, One-glance Conversion】The angle finder is featured with inside & outside scales to measure angle for single cut and miter cut. The angle conversion table on instruction converts right angle to your miter saw..
【O-ring Design, Make Right Angle】The O-ring mechanism is full 360 degrees rotation, easliy to adjust and capture angle measuring. 6" angle measuring tool, Easy to carry and store..
【Combination for Functions】Integrated with spirit level, ensure to hold the protractor on same plane to get accurate angle. Inch / CM combination enables quick measurement.
【Versitility, Won't Miss Out】No matter trim widow & door, or cut tight-fitting joints, this carpenter tools measure angles to get right joint surface. It's essential for carpentry, molding, plumbing and metalworking..

Check Stock

Westcott 3 1/2-Inch 360 Degree Compass Protractor, Transparent (255), Clear

CLEAR PROTRACTOR: 3.5 Inch and 360 Degree plastic protractor calibrated in degre.
Making it ideal for your drawing and drafting needs.
ACCURATE MEASUREMENT: Protractor with easy to read numbers that record angles precisely and quickly.
EASY TO READ: Angle protractor made of clear transparent plastic which allows viewing through to the page while you work.
DURABLE MATERIAL: The surface of this plastic scale ruler is laminated with solid center for durability.
MULTI PURPOSE: This measuring tool is ideal for artists, designers, architects, engineers, and students.

Check Stock

Bnlcd Miter Saw Protractor, 7.3-Inch Aluminum Protractor Angle Finder Featuring Precision Laser Engraved Scales, Woodworking Angle Measuring Tool with 360 Degree Rotation Function

【MITER CUT & SINGLE CUT】This professional miter protractor has two scales to measure angles. One for a single cut which use the ourside scale, where only one piece of material is cut, and another one which use the inner scale, when two pieces of material need to be lined up/match.
【CUTTING GUIDE TOOL】Doing angle measuring first, then set the angle on your miter saw or table saw without conversion required, smarter and friendly for baseboard trimming work.
【LENGTH MEASUREMENT】INCH/CM 2 type of scales for length measurement suitable for different scenarios.
【MITER ANGLE FINDER】It's also equip with high precision level gauge design for simple tasks of level measuring, And measuring arm can 360° rotate freely without any dead angles.
【DURABLE CORNER ANGLE FINDER TOOL】D DUSSAL bevel protractor is made from high-quality ABS plastic and it's resistant to scratch and very durable without worrying about rust and deformation, well installed keep it will not loose and shake durring.

Check Stock

Miter Saw Protractor, XUNTOP 7-Inch Aluminum Miter Protractor with Mini Level Gauge Rust Proof Angle Finder Featuring Precision Laser Engraved Scales for Carpentry, Crown Molding, Baseboard, DIY-Black

【Accurate Miter Saw Protractor】Compare with the plastic miter protractor, XUNTOP miter saw protractor can provide accurate angle calculations for the highest precision Single/Miter cutting, beacuse it is made of high quality anodized aluminum alloy steel. And the internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners..
【Easy to Use】This miter saw protractor rotates a full 360 degrees for measuring any odd angles, and it tells you where to set your saw directly for an accurate Miter cut, and Single cut with no calculations. Very easy to transfer an odd angle from piece to piece, making most cutting work much more accurate and reducing hand fitting for making nice clean cuts without guessing at angles and wasting material.
【Easy to Read Numbers】The markings on miter saw protractor is precision laser engraved,and white markings on black background are much easier to read, even without bright light..
【Durable Saw Protractor】This miter angle finder is made of solid CNC-machined anodized aluminum alloy steel with a black anodized finish, and the 1/4-inch thick aluminum alloy is stronger and won't bend like the plastic ones, resistant to scratch for daily use. It feel....

Check Stock

24 Pack Plastic Protractor Math Protractors 180 Degrees for Angle Measurement,6 Inch Student Math Protractor, Clear

High Quality: Made of hard plastic, this clear protractor is thick and durable that it is not easy to snap, but very light and easy to carry..
Convenient Reading:The protractor is made of good quality clear plastic which allows you see the words, letters, and figures on page through the protractor..
Measure Range:This protractor measures 0 to 180 degrees left to right and right to left, and the minimum accuracy is 1 degree, each 10 degrees have a clear line to distinguish..
Extensive Use:This protractor can be applied in painting, measuring, doing math homework, technical drawing, etc. Suitable for students, teachers, office workers, engineers, etc..
Unique Design :With hollow center, the student protractor is easy to grip. They are convenient to fix on the paper and books to get the accurate angle and length..

Check Stock

Aluminum Miter Saw Protractor, Thinkor 7\ Angle Finder Featuring Precision Laser Engraved Scales for Carpenters, Plumbers and All Building Trades

2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing.
High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately.
0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle.
Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading.
Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift.

Check Stock

Digital Angle Gauge Meter, XRCLIF Magnetic Base Level Box Angle Finder Protractor Bevel Gage Inclinometer Measuring Tool for Carpentry, Building, Masonry Bevel

2 Measuring Modes: The digital protractor can allow operator to measure the different angle between tow objects as well as measure the angle between horizontal plane and the first object..
Magnetic Base Angle Meter can firmly attach to saw tables, fences, blades and other metallic surfaces, reversible display inverts when gauge is upside down. Aluminum alloy frame, ABS plastic body IP54 dust and water resistant.
Measuring Range: 4 X 90°, deviation only +/- 0.1°, the rest +/- 0.2°, working temperature 32°F to 122°F / 0°C ~ 50°C . Compact size is easy for tight spaces measure and convenient for storage and carry..
Low Power Consumption: this digital angle protractor powered by a single 1.5V AAA battery (included), which can be used for more than 50 hours. Save energy and money..
Other Functions: the angle level box with backlight LCD screen display, auto power off after 5 minutes without any movement nor button press. A protective case with belt loop for you to carry easier..

Check Stock

MulWark 26ft Measuring Tape Measure by Imperial Inch Metric Scale with Both-Side Metal Blade,Magnetic Tip Hook and Shock Absorbent Case-for Construction,Contractor,Carpenter,Architect,Woodworking

【Patented measuring technology】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read..
【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage..
【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm..
【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION..
【Battery】CR2032 battery. Package contains battery..

Check Stock

24 Pack Plastic Protractors Math Protractor 180 Degrees 4 Inch (Red Green Yellow Blue)

24 Pack plastic protractors: math protractor features an open center and accurate 4 inches ruler across the base.
24 Pack can meet the needs, and adequate to use for a long time.
Measure range: range of 0 to 180 degrees, the minimum accuracy of the angle is 1 degree, each 10 degrees have a clear line to distinguish.
Assorted colors and good quality: the protractor made of good quality plastic.
Assorted color allow you see the words, letters, figures on page through the protractor.
Wide applications: the geometry protractors are suitable for measure, student work, graphing of engineering.
Protractor with inch and centimeter marks makes measuring easier.
Good gift for children: abundant bulk, you can make it as gifts for your kids in school, friends.
Lightweight and easy to carry, not take too much space.

Check Stock

Starrett Miter Saw Protractor, Prosite 505P-7, Angle Finder Gauge Cutting Guide Tool with Laser Scales for Carpenters, Plumbers, Building Trades, DYI Home Improvement, 7” Narrow Plastic

PREMIUM PROTRACTOR: The Prosite 505P-7 is a 175mm (7") Plastic Saw Miter Protractor that provides accurate angle calculations for transferring and making cuts with the utmost precision.
EASY TO USE: This measuring tool is an easy to use cutting guide for carpenters, plumbing, builders, and DIY home improvement jobs.
MITER CUT & SINGLE CUT TRANSFERS: The miter cut scale transfers readings directly to the miter saw for miter joints.
The single cut scale transfers readings straight to the miter saw for butt joints.
SAVE TIME & REDUCE WASTE: Using an effective protractor like this model, which is made from durable 7-inch hardened plastic, cuts down on working time and helps you to reduce waste.
PERFECT FIT: Simply set your saw to the angle that you read on the protractor.
Upside down or backward, rest assured that you will always get the correct reading.

Check Stock