ReviewsAngle Measuring Tool With Protractor Head

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • ...ipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and tangent chart, this pipefitter tool can help you make straight lines around pipes. When judging the horizontal state, the bubble of the green liquid needs to be in the middle of two lines on the protractor. 【Note:】When determining the angle, the bubble of the green liquid should be in the horizontal position whatever the angle is..
Check Stock

Bnlcd Miter Saw Protractor, 7.3-Inch Aluminum Protractor Angle Finder Featuring Precision Laser Engraved Scales, Woodworking Angle Measuring Tool with 360 Degree Rotation Function

  • 【MITER CUT & SINGLE CUT】This professional miter protractor has two scales to measure angles. One for a single cut which use the ourside scale, where only one piece of material is cut, and another one which use the inner scale, when two pieces of material need to be lined up/match.
  • 【CUTTING GUIDE TOOL】Doing angle measuring first, then set the angle on your miter saw or table saw without conversion required, smarter and friendly for baseboard trimming work.
  • 【LENGTH MEASUREMENT】INCH/CM 2 type of scales for length measurement suitable for different scenarios.
  • 【MITER ANGLE FINDER】It's also equip with high precision level gauge design for simple tasks of level measuring, And measuring arm can 360° rotate freely without any dead angles.
  • 【DURABLE CORNER ANGLE FINDER TOOL】D DUSSAL bevel protractor is made from high-quality ABS plastic and it's resistant to scratch and very durable without worrying about rust and deformation, well installed keep it will not loose and shake durring.
Check Stock

Westcott 3 1/2-Inch 360 Degree Compass Protractor, Transparent (255), Clear

  • CLEAR PROTRACTOR: 3.5 Inch and 360 Degree plastic protractor calibrated in degre.
  • Making it ideal for your drawing and drafting needs.
  • ACCURATE MEASUREMENT: Protractor with easy to read numbers that record angles precisely and quickly.
  • EASY TO READ: Angle protractor made of clear transparent plastic which allows viewing through to the page while you work.
  • DURABLE MATERIAL: The surface of this plastic scale ruler is laminated with solid center for durability.
  • MULTI PURPOSE: This measuring tool is ideal for artists, designers, architects, engineers, and students.
Check Stock

Mecurate Miter Saw Protractor, Inch/Metric Miter Protractor with Bobble Level, Miter Cut and Single Cut for Crown Molding

  • 【Accurate & Durable 6" Angle Finder】Made by durable ABS plastic, the protractor with accurate laser engraved scales and level bubble. Reliable to measure accurate angles for crown molding and a variety of other carpentry applications..
  • 【Two Measures, One-glance Conversion】The angle finder is featured with inside & outside scales to measure angle for single cut and miter cut. The angle conversion table on instruction converts right angle to your miter saw..
  • 【O-ring Design, Make Right Angle】The O-ring mechanism is full 360 degrees rotation, easliy to adjust and capture angle measuring. 6" angle measuring tool, Easy to carry and store..
  • 【Combination for Functions】Integrated with spirit level, ensure to hold the protractor on same plane to get accurate angle. Inch / CM combination enables quick measurement.
  • 【Versitility, Won't Miss Out】No matter trim widow & door, or cut tight-fitting joints, this carpenter tools measure angles to get right joint surface. It's essential for carpentry, molding, plumbing and metalworking..
Check Stock

Digital Angle Finder Protractor Angle Measurement Tool, 2-in-1 Digital Protractor for Woodworking/Construction/DIY, Stainless Steel 360 Degree with Large LCD Display 7inch

  • ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction..
  • SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects..
  • DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool..
  • WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion battery..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

General Tools 18 Round Head Stainless Steel Angle Protractor, 0 to 180 Degrees, 6-Inch Arm

  • ROUND HEAD- 3-3/8” x 2” head dimension makes it easier to identify the precise angle.
  • MEASURES- Deeply etched graduations read from 0° to 180° in forward and reverse directions and will not wear or rub off.
  • ADJUSTABLE- 6 inch adjustable protractor arm locks into desired position with knurled thumb nut to quickly and easily identify angles.
  • DURABLE- Stainless steel for precision, strength and rust resistance.
  • ESSENTIAL TOOL- Perfect for students, machinists, carpenters and woodworking hobbyists for setting bevels, measuring and transferring angles.
Check Stock

Generic Aluminum Alloy Multi Angle Ruler Drill Guide Template Tool Ceramic Tile Hole Punch Locator Folding Ruler for DIY Carpenters Tilers Measuring, 9 fold, single section 17.5x2.5cm

  • ...the material you need to cut, quickly draw the size and cut, save your time and improve your work and productivity..
  • Accurate angle measurement tool: This angle tool is etched marks (inches and centimeters), which is very suitable for angle measurement. You can adjust the size to accurately mark the tiles. The metal protractor is a measurement and integrated hole positioning tool..
  • High-quality materials: This multi-angle measuring ruler is made of high-quality aluminum alloy, which will not break due to bending or rust, and is more durable and stronger than plastic..
Check Stock

Generic Aluminum Alloy Multi Angle Ruler Drill Guide Template Tool Ceramic Tile Hole Punch Locator Folding Ruler for DIY Carpenters Tilers Measuring, 16 fold, single section 17.5x2.5cm

  • ...the material you need to cut, quickly draw the size and cut, save your time and improve your work and productivity..
  • Accurate angle measurement tool: This angle tool is etched marks (inches and centimeters), which is very suitable for angle measurement. You can adjust the size to accurately mark the tiles. The metal protractor is a measurement and integrated hole positioning tool..
  • High-quality materials: This multi-angle measuring ruler is made of high-quality aluminum alloy, which will not break due to bending or rust, and is more durable and stronger than plastic..
Check Stock

Generic Aluminum Alloy Multi Angle Ruler Drill Guide Template Tool Ceramic Tile Hole Punch Locator Folding Ruler for DIY Carpenters Tilers Measuring, 12 fold, single section 17.5x2.5cm

  • ...the material you need to cut, quickly draw the size and cut, save your time and improve your work and productivity..
  • Accurate angle measurement tool: This angle tool is etched marks (inches and centimeters), which is very suitable for angle measurement. You can adjust the size to accurately mark the tiles. The metal protractor is a measurement and integrated hole positioning tool..
  • High-quality materials: This multi-angle measuring ruler is made of high-quality aluminum alloy, which will not break due to bending or rust, and is more durable and stronger than plastic..
Check Stock

Generic Aluminum Alloy Multi Angle Ruler Drill Guide Template Tool Ceramic Tile Hole Punch Locator Folding Ruler for DIY Carpenters Tilers Measuring, 6 fold, single section 17.5x2.5cm

  • ...the material you need to cut, quickly draw the size and cut, save your time and improve your work and productivity..
  • Accurate angle measurement tool: This angle tool is etched marks (inches and centimeters), which is very suitable for angle measurement. You can adjust the size to accurately mark the tiles. The metal protractor is a measurement and integrated hole positioning tool..
  • High-quality materials: This multi-angle measuring ruler is made of high-quality aluminum alloy, which will not break due to bending or rust, and is more durable and stronger than plastic..
Check Stock

Aluminum Miter Saw Protractor, Thinkor 7\ Angle Finder Featuring Precision Laser Engraved Scales for Carpenters, Plumbers and All Building Trades

  • 2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing.
  • High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately.
  • 0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle.
  • Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading.
  • Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift.
Check Stock