ReviewsAngle Ruler For Tile Work

Suncala Digital Angle Finder Protractor with Zeroing and Locking Function, 7-Inch Stainless Steel Angle Finder Ruler

* QUICK AND ACCURATE READING - Digital LCD display for easy reading.
* MULTI-FUNCTIONAL MEASUREMENT - 2-in-1 device to measure both length and angle, metric and Imperial Scale.
* RESETTING & LOCKING - The ruler could be hold at any angles using the lock/open knob to adjust the tightness..
* DURABLE AND SIMPLE ON/OFF - Ruler made of stainless steel for durability, Could be well used into various fields besides of Angle ruler, Straight ruler and Square Ruler..
Can work more than 2000 hours with one piece of CR2032 coin battery(Included).

Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....

Check Stock

Amenitee Six-Sided Aluminum Alloy Angle Measuring Tool - Universal Opening Locator-Universal Ruler - Full Metal Multi Angle Measuring Tool-Upgraded Aluminum Alloy Ruler (six sides)

DURABLE AND ERGONOMIC: Made of 5mm aluminum alloy with durable metal knobs and bolts, It`s more durable and quality than plastic one.Say goodbye to your fragile template tool..
ACCURATE ANGLE MEASUREMENT TOOL: This AMENITEE Universal Opening Locator is Laser engraved markings(inches & centimeters) perfect for precise and accurate angle measurements.With 4 adjustable, 2-sided arms, you can create a custom stencil for every job. Use it to mark tile, flooring, bricks, lumber, laminate, metal & more!.
MULTIPLE APPLICATIONS: Set at 90-degree angles to space parallel pieces of wood, form into a T-Square to align your brick, even set your own distances for corbelling, any other project you can think of..
EASY TO USE: Just place the template tool ruler onto your work area, slide the rulers into the shape needed, and tighten the screws.The innovative, four-sided template tool can be used as a stencil for cutting your work piece..
WIDE RANGE OF APPLICATIONS: Create layouts in tile, brick, stone, lumber, laminate and more.
it is handy for creating bull eyes, arches, plumb cuts and any project you can think of.
good for builders, craftsmen, weekend warriors and DIY-ers alike.Perfect for professional builder, craftsmen,engineer, weekend warriors and DIY..

Check Stock

Angle Protractor ,Stainless Steel Angle Ruler Finder 0-180 Degrees ,10 cm Woodworking Ruler, Angle Measure Tool, Angle Finder Ruler, Craftsman Angle Measure Tool

2 in 1 Angle Finder : It is 2-in-1 manual protractor ruler for measuring lengths and angles. Great gift for dads, men and women who work in woodworking, construction, engineering..
Durable Angle Ruler: It is stainless steel protractor,prevent rust and corrosion , do not bend or deform easily ,laser etched measurements offer clear reading ..
Lightweight and Portable : You can put the angle measure tool in your pockets,the angle finder ruler is clear and accurate for measuring length(0-10 cm)..
Adjustable Protractor Arm : The protractor arm can be easily asjusted from the nut, so it helps you draw radial lines, measuring and marking angles..
Wide Applications : This angle ruler is a practical measuring tool for school, office, architect, suitable for for engineering, school, office, architect, and drawing who needs to measure data..

Check Stock

General Tools Contour Gauge 833 - 10" Angle Finder Tool for Home Improvement - Gadgets for Men

PRECISE SHAPE DUPLICATION: Instantly copy any shape or duplicate a profile for woodworking, tile flooring, and linoleum installation. This ANGLE-IZER tool can replicate the detailed moldings or match cut-outs around door casings and pipes..
PERFECT PROFILE: Fabricated from sturdy plastic, our ruler accurately records the cross-sectional shape of any surface. It can measure profiles up to 1-1/4" (32mm) and eliminates guessing dimensions of irregular shapes..
EXTRA LENGTH: Add our 10" edge finder to your carpenter tools. It's ideal for measuring moldings, tile installation, duplicating spindles on the lathe, or any home project where contour duplication is essential..
EASY TO USE AND STORE: It creates an instant template for curved and odd-shaped profiles. Just press the tool’s teeth onto an outline and trace. It comes with 4 magnets on the back, allowing for easy storage..
GENERAL TOOLS: We have been a recognized leader in the innovation, design, and development of specialized DIY tools for many years. We encourage craftspeople, artisans, and DIYers to work smarter, measure better, and increase productivity..

Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....

Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....

Check Stock

YIYATOO Aluminum Alloy 6-Sided Angle Measurement Tool Tile Tools with 5 -Hole Positioning Aperture for mark tile flooring bricks lumber laminate metal & more!

【Aluminum alloy with laser engraving 】: Made of aluminum alloy with durable metal knobs and bolts, It`s more durable and quality than plastic one.....
【Multiple applications】: this angle ruler came with six arms and the circular inserts， could do multiple things ，Just place onto your work....
【Accurate angle measurement tool】: This Six-Sided Aluminum Alloy Angle Template Tool is Laser engraved markings(inches & centimeters) perfect for....
【Portable & Easy to store】This Foldable Angle Ruler easily folded and carried to your next project, helps speed up the process of making those....
【Great versatile gift】 A six-sided multi-angle ruler is a universal angle measurement template tool that provides brick, wood, tiles, flooring,....

Check Stock

SCKUBMF Multi Angle Measuring Ruler Universal Multi Angle Measuring Ruler 12 Section Ceramic Tile Opening Locator Aluminum Alloy Multi Angle Measuring Ruler

This multi angle measuring ruler is made of high-quality aluminum alloy, which is not easy to bend or rust, fall and durable. More durable and....
With 12 rulers, this multi angle measuring ruler can accurately create the required shape, and then find the correct drilling position. By folding 12....
Small size and easy to carry, measurement is very convenient, just fold it and put it in the bag..
The tool is made of high quality aluminum alloy, which is durable and can stand the test of time. This tool can stand wear and tear. Laser solid....
It is very suitable for woodworking, brick, ceramic tile, wood, glass, stone, laminate, construction and engineering projects! It can also replace....

Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

【Multifunctional 3D Mitre Angle Ruler】The angle ruler has more than 10 functions, 10-in-1, which are: square, protractor, dovetail template, circular hole, parallel line, vertical line, drilling positioning, T-shaped dovetail joint, 45° angle, 90° angle, ten common angles to meet your different needs..
【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in ....

Check Stock

Aluminum Miter Saw Protractor, Thinkor 7\ Angle Finder Featuring Precision Laser Engraved Scales for Carpenters, Plumbers and All Building Trades

2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing.
High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately.
0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle.
Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading.
Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift.

Check Stock