ReviewsAngle Sensor Gauge

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..

Check Stock

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
One-year warranty for non-human factor damage and free lifetime technical support..

Check Stock

AEM (30-4110) UEGO Air/Fuel Ratio Gauge

Interchangeable black and white faceplates included for customizing gauge appearance.
Bosch 4.9 LSU wideband sensor and weld-in bung included PN 30-4110.
No free air sensor calibration required ever. A 2-1/16 inch gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere.
Interchangeable black and silver bezels included. 52mm (2-1/16”) gauge housing.

Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
【Usage】: Suitable For: Angle measurement.

Check Stock

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.

Check Stock

LSU 4.9 Lambda WideBand O2 Oxygen Sensor | for AEM 30-4110 30-0300 30-0310 - X Series AFR Inline Controller - UEGO A/F Ratio Wideband 02 Gauge | Replace# 17025, 0258017025

【HIGH PERFORMANCE】Our wideband sensor use a more sophisticated sensing element that provides a signal that is proportional to the amount of oxygen in the exhaust, helps ensure your engine is constantly monitored and operating efficiently, while maximizing performance.
【PREMIUM QUALITY】Durability matters, that is why our o2 sensor is crafted from high temperature resistant material for quicker response times. Double laser-welded stainless steel body is totally submersible to seal tight for long life.
【FITS】AEM Wideband Controllers with part numbers 30-4110 Digital Wideband UEGO Gauge, 30-0300 X-Series Digital Wideband UEGO AFR Gauge, 30-0310 X-Series Inline Wideband UEGO AFR Controller | Most 4.9 LSU Wideband Controller Gauge.
【REPLACE OE NUMBER】17025, 0258017025, 304110, 300300, 300310. A lot of buyers brought the wrong A/F gauge sensor because they don't pay attention to the plug and the length of the sensor. Please check these 2 features before purchase.
【12-MONTH WARRANTY】If the AEM wide band lambda sensor fails, stops working or any other problems, you can contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND.

Check Stock

Devil s Protractor [Explicit]

Precise angle and/or slope measurement with angle meter, bubble level, laser level with Accelerometer or Rotation Vector Sensor. (Check sensor....
Option to measure angle or slope on surfaces not parallel to ground with relative angle measurement mode..
2 orientation axis for measurement.(Move your device left/right or back/forward direction to measure angle).
Option to measure difference between 2 separate measurements with difference measurement mode..
Option to measure angles using very accurate Rotation Vector Sensor, or Accelerometer..

Check Stock

GlowShift Diesel Gauge Package Compatible with Ford Super Duty F-250 F-350 6.0L 7.3L Power Stroke 1999-2007 - Tinted 7 Color 60 PSI Boost, 2400F EGT & Transmission Temp Gauges - Tan Triple Pillar Pod

GlowShift Diesel Gauge Package for the 1999-2007 Ford Super Duty 7.3L 6.0L Power Stroke F250 F350 Truck features a Factory Color Matched Tan Triple Pillar Pod, Tinted 7 Color Series 3 Gauge Diesel Set, Boost MAP Line T-Fitting Adapter, 3 Gauge Power/Sensor Wiring Harness & an Installation Guide that Walks Users Through the Process of Installing the Gauges, Sensors & Pod Step-By-Step.
Includes 60 PSI Boost Gauge with 1/8-27 NPT Compression Fittings, 9' Nylon Boost Hose & Boost MAP Line T-Fitting Adapter - 2400°F Pyrometer EGT Gauge with 1/8-27 NPT EGT Probe with 3' of Wire, 6' Sensor Harness & 2' Power Harness - Transmission Temperature Gauge with 1/8-27 NPT Temperature Sensor & 2' Power/Sensor Harness - Tinted 7 Color Series Features a Black Dial, Tinted Lens, 7 Solid Color Modes & 2 Color Cycle Modes.
Factory Color Matched Tan Triple Pillar Pod for 1999-2007 Ford Super Duty 7.3L 6.0L Power Stroke F250 F350 Trucks Mounts 3 Gauges to the Truck's A-Pillar - Overlay Design Mounts Pod on Top of the Factory A-Pillar - Manufactured from ABS Plastic - UV Protected - Includes Mounting Hardware.
Includes Ford Super Duty 7.3L 6.0L Power Stroke Installation Guide Complete with Step-By-Step Instructions & Photos that Help Walk You Through the Process of Installing....

Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

【Accurate Data & 360°Measuring】 The GemRed level tool applies Absolute Angle Sensor , to ensure the accuracy of data up to ±0.15°, resolution is 0.05°. 360°measuring range to meet your production needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..

Check Stock

Mopeka Pro Check Sensor - Wireless Propane Tank Magnetic Sensor Level Indicator - Propane Gas Tank Pressure Gauge Electronic for BBQ Grill - Remote Ready Propane, Butane And Fuel Level Gauge With App

WIRELESS PROPANE GAUGE - This digital propane tank gauge is an essential tool for anyone who enjoys outdoor cooking or using propane-powered patio heaters. The Mopeka tank sensor connects to your phone through a mobile app, providing you with real-time updates on the propane level..
EASY TO INSTALL - Our propane tank gauge for grill effortlessly attaches to the underside of your propane tank through powerful magnets. It can be secured in place to the tank level in seconds with enhanced ultrasonic capabilities. Even when traveling on uneven terrain, the sturdy magnets prevent our monitor sensor from detaching from your RV's propane tanks. This gas gauge for propane tank is designed to accommodate all standard and custom LPG tank sizes up to 120 gallons or 420 lbs..
IMPROVED BATTERY - This propane tank fuel gauge is convenient for monitoring your propane levels without physically checking the tank. With the latest improvements in battery technology, propane tank gauge level indicator now has a longer-lasting battery, ensuring it remains operational for extended periods without needing to be recharged or replaced..

Check Stock

Calculated Industries 7489 AccuMASTER Value Pack – 2-in-1 Digital Angle Gauge plus the Digital 7-Inch Angle Finder Ruler | Accurate Precision Tools for Carpenters, Woodworkers, Fabricators | 2-Pieces

VALUE PACK INCLUDES – A precision tools combo of the Digital Angle Finder Ruler and the 2-in-1 Digital Angle Gauge. Perfect for the pro or hobbyist who needs to transfer true level and precise angle settings to their saws.
TOOLS USED TOGETHER – the Angle Finder Ruler enables you to determine the angle of your workpiece that you need to match. The Digital Angle Gauge helps you transfer that angle to your saw or other tool so your finished cut installs perfectly.
DUAL FUNCTIONALITY – Angle Gauge works as an inclinometer or tilt gauge to set or check relative angles between surfaces, also works as digital level for tight spots with bright backlit Stay glow display, strong magnetic base, dust/water resistant.
ANGLE FINDER RULER can be reset to zero at any position for simple relative or differential angle calculations. Large LCD display HOLD lets you freeze a display value. Full-range protractor measures 360° for both inside and outside angles, 7-inch ruler arms.

Check Stock