ReviewsAnidees Aiblack Dual Chamber Atx Case

Rosewill ATX Mid Tower Gaming PC Computer Case with Dual Ring Red LED Fans 360mm Water Cooling Radiator Support Tempered Glass and Steel USB 3.0 - CULLINAN V500 Red

  • DUAL RING LED FANS: Brighten your PC case with 4 pre-installed 120mm dual ring red LED fans that can switch between 3 fan speeds for different airflow and noise configuration..
  • 3-SIDED TEMPERED GLASS: This tempered computer case features three sides of sleek and sturdy tempered glass for you to display every component of your battlestation build for all to admire..
  • E-ATX SUPPORT: The spacious CULLINAN V500 supports Extended ATX (EATX) motherboards with a larger form factor length of 13” instead of 9.6” for more functionality..
  • EXCELLENT AIRFLOW: Engineered to keep your system temperatures low and your case well-ventilated. Further optimize airflow to your components by switching from Low to High fan speed..
Check Stock

Anidees AI Crystal Cube Mesh Front Panel AR V3 Dual Chamber Tempered Glass EATX / ATX PC Gaming Case w/ 5 RGB PWM Fans / 2 LED Strips - Black AI-CL-Cube-MAR3

  • MESH Front Panel for Optimised High Airflow, Dual Chamber design for better airflow and cable management..
  • Tempered Glass side panel: 5mm Tempered Glass, 70% transmittance to show off the system , USB2.0 x 2, USB3.0 x2.
  • Motherboard Support : E-AT, ATX, m-ATX, mini-ITX . Water Cooling Ready : Support 240/280 mm Radiator in the top and front side and vertical Graphic card support..
  • GPU Max Support 330 mm /13 inches , CPU Cooler Max height 168mm /6.6 inches..
  • Easy to use : the fan hub allow you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by ASUS Aura Sync (ARGB) , MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion/ Fusion2.0(5V addressable 3pins header on motherboard)..
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • Support 8pcs GPUs: The mining rig case support 8 GPUs. Support ATX motherboard, built-in, external dual PSU hosting, PSU mounting, hard drive. 8 GPUs can be installed at the same time, which greatly improve the performance of the BTC/ETH/ETC mining machine case..
  • Generous Space between GPUs: The Gap between GPU ports is about 65mm, it can ensure high performance, low power consumption for mining..
  • Support 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't in....
Check Stock

DIY ITX MATX ATX Computer Open Air Case, Aluminum Open Frame Computer Case, PC Test Bench Vertical Motherboard Chassis DIY Kit(Blue Black)

  • Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
  • Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
  • DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
  • ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
  • Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..
Check Stock

Segotep T3 White Mid-Tower ATX Gaming PC Case w/ ARGB & PWM Fan, Support Top & Side 360mm Radiators, Snap-On Opening & Closing Front Panel, Type-C I/O Port, Tool-Free Disassemble

  • ... duct design can provides ample airflow. 1 pre-installed ARGB fan can offers 16.8 million colors for excellent customizable lighting..
  • 【FOCUSED ON CPU COOLING 】 ATX pc case is suitable for high-powered PC builds and the fan can be mounted behind the motherboard for the precise cooling of the CPU core..
  • 【SUPPORT DUAL 360MM WATER COOLING 】 Our white ATX computer case allows for the simultaneous installation of dual 360mm radiators, top 360mm water cooling and side 360mm AIO liquid cooled gpu. PC gaming case can supports up to 13 fans for best temperature performance..
  • 【TOOL-FREE DISASSEMBLY】 The modular design of our mid-tower pc case allows for tool-free disassembly. Allows you to achieve different thermal layouts by tool-free removal of the front panel, snap-on side panels, baffles and compartment covers..
  • 【PRE-INSTALLED GPU Bracket】 Our computer gaming case pre-installed graphics card bracket, can be adjusted according to the location of the graphics card fixed. Graphics card holder silicone pad temperature resistance value up to 240℃..
Check Stock

Aluminum MATX-Case Desktop PC-Case Tower-Chassis - Supporting ATX&SFX/SFX-L Power Supply/MATX& DTX&ITX Motherboard/360/240/120 Water Cooling& Air Cooling…

  • 【Small volume&large capacity】 With much Smaller Size compared with traditional Micro PC case but with big capacity and more hardware compatibility functions for personal computer home using, students &gamers.
  • 【Outstanding side Panel design】 Aluminum side panel seamless connected with half part of transparent tempered glass design makes the micro atx case standing out in many micro computer cases.
  • 【Unique installation design】 Support ATX&SFX/SFX-L power supply and support graphic cards with vertical installing(Charming lights can be seem) and side lying installing which attracts countless gaming case ITX, ATX &MATX gaming pc case lovers.
  • 【Exquisite workmanship】 All edage parts of the case is CNC polished by hand with exquisite workmanship. The hidden screw installation method makes the side panel smooth and exquisite, and allows ATX/mATX case fans to install the case tools free.
  • 【High efficent heat dissipation】 Can be installed with air cooling & 360/240/120 water cooling, making the heat dissipation performance much higher than ordinary Mid Tower ATX Case.
Check Stock

Cooler Master MasterCase H500P Mesh Computer Case High Air Flow Mesh Front, RGB LED, Tempered Glass MCM-H500P-MGNN-S10

  • DUAL 200MM RGB FANS - Two massive 200mm MF200R RGB fans draw high-volume airflow into the case for superior cooling (includes an additional black 140mm fan at the back).
  • BUILDER FOCUSED - A DIY or case modding dream the front mesh intake panel transparent top exhaust panel and both side panels can be easily taken off - perfect for creative people looking to personalise their PC.
  • TEMPERED GLASS SIDE PANEL - The easy-to-remove light-grey tinted side panel combined with minimalist CPU cut out cover PSU shroud and clean cable management covers with dedicated routing creates a minimalist frame in which to showcase the hardware inside Supports E-ATX ATX Micro-ATX and Mini-ITX motherboards - features 2 additional PCI slots at the rear to better highlight graphics cards.
  • LIQUID COOLING READY - The H500P accommodates liquid coolers with radiators up to 360mm in length either within the top panel or behind the front mesh.
  • ACCESSIBLE I/O PANEL - Features 2 x USB 3 2 (formerly USB 3 0) ports 2 x USB 2 0 ports 1 x 3 5mm audio jack 1 x 3 5mm mic jack ARGB Controller and 1 x 2-to-3 ARGB Splitter.
Check Stock

AMANSON PC CASE ATX Mid Tower Case Tempered Glass Gaming Computer Case Without ARGB Fan Black

  • [Powerful Cooling System] AMANSON H6 Mid tower PC case can accommodate 10 ARGB 120mm fans to provide lighting while maintaining good airflow.Amanson PC cases support, ATX, Micro ATX and Mini ITX motherboards..
  • [Unique Design] H6 ATX Gaming Case is equipped with tempered glass on the front and left side of the case, allowing a clear view of the RGB lighting and the components inside the building, creating a great gaming atmosphere..
  • [More Space] AMANSON H6 Mid tower computer case with extra space inside, maximum length 360mm GPU, top of PC case designed for mounting 360/280/240mm radiator..
  • [Top I/O Panel] 1 USB3.0 port, 1*Type-c,1 HD audio, power button.ATX gaming case provides more convenience and entertainment for gamer..
  • [Super Cable Management] Back Bays:3.5*1 HDD's and 4 *2.5'' SSD's.H8 mid tower gaming pc case comes with 1 dust filter , a large space behind the motherboard tray for hidden cable management, this area will help you clean up the interior and improve airflow..
Check Stock

GIM ATX Mid-Tower PC Case Black 10 Pre-Installed 120mm RGB Fans Gaming PC Case 2 Tempered Glass Panels Gaming Style Windows Computer & Desktop Case USB 3.0 I/O Port, Water-Cooling Ready (Black)

  • 【Powerful Cooling System】10pcs 120mm GIM ARGB fans are pre-installed for the case to provide lighting and excellent air performance at the same time, keep cooling. And GIM Gaming Case supports ATX, Micro-ATX and Mini-ITX motherboards. (The actual fans you received may change depending on the shipment batch).
  • 【More Space】Gaming pc Case has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ;2 x 3.5" HDD;ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【ARGB Lighting System】: Mid-Tower ATX Gaming PC Case comes with 10 GIM KB-11 RGB case fans(120mm white Addressable speed adjustable fans) and 1 RGB Backplate and 1 GIM hub. The ARGB lighting system can be controlled via the include remote, create an amazing lighting show while providing great cooling..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where....
Check Stock

GIM Micro ATX Case, Mini-ITX Gaming PC Case 2 Tempered Glass Panels & Front Panel Micro ATX PC Case Mini Tower Computer Case USB 3.0 I/O Port, Rhythm Surround Light, Water-Cooling Ready

  • 【Rhythm Surround Light】 GIM micro atx case has a built-in acoustic sensor, so as long as there is sound the panel light bar will dance to the melody. you can enjoy the joy of music in the game or leisure time..
  • 【Washable Pull-Out Dustproof Mesh】 The botton of atx pc case is equipped with 1 pcs 0.1cm pull-out dust net, it can be directly washed, keep your pc case clean and tidy at all times..
  • 【Mortise and Tenon Quick Release Structure】 This Micro atx pc case designed with Quick Release Structure. The top panel need to be opened firstly, then to remove the front panel glass and left side glass. The top panel comes with anti-loss screws for Quick Removal and installation save your time..
  • 【TOP I/O Panel】 GIM mini atx case designed with 1 x USB 3.0 Port, 1 x USB 2.0 Port, 1 x Headphone Jack, 1xMicrophone Jack, 1x Reset/LED Button, 1x Power Button. Our USB cable is shielded wire so that you can transmit data without interference..
  • 【Cooling Exhaust & Heat Dissipation】 Four sides of the white micro atx case are ventilation surface, effectively reduce the internal temperature of the chassis, enhance the service life of the pc case and your using experience..
  • 【Full-view Tempered Glass Panels】 GIM Mini PC Chassis has 2pcs 3mm-thick tempered g....
Check Stock

SZSKYING Gaming pc Case ATX Computer Game mid Tower 3.0 USB Tempered Glass Panel with 10PCS ARGB Fans Control Remote Black

  • 1. RGB Strong Cooling System: 10PCS 120MM new design RGB LED Pre-installed Fans.
  • 3PCS In Front side, 1PCS Rear Position, 3PCS on Top, 3PCS on Bottom,....
  • 2. Great Compatibility: The excellent ATX Gaming case supports motherboard ATX, Micro-ATX and Mini ITX.
  • Support 3.5’’ HDD, 2.5’’ SDD*2, to....
  • 3. Unique Design: Front Panel Transparent Tempered Glass, Full Size Tempered Glass left side panel, easily to show the cool RGB Fans and inner spares.
  • 4. Convenient Ports: On the top side, there are USB 3.0*1, USB 2.0*2, Audio,Microphone/Earphone port, Reset, Power Button.
  • 5. QUICK PROBLEM SOLVE:Our GAMEING CASE give free replacement guarantee,AND if you ENCOUNTER ANY PROBLEMS in the purchase process, PLEASE CONTACT US....
Check Stock