ReviewsAnnealed Steel Tube

3/8 Transmission Cooler Hose - 6AN High Pressure Fuel Line Braided Hose For Marine, Car, Engine System, Alcohol, Nitro, Fuel Transmission, Clutch, Power Steering, Oil and Hydraulic (10 FT)

...lps in better flow and intake of fuel. This 3/8 braided hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 fuel line comes as a roll of 10 feet long enough for a wide range of applications..
QUALITY TESTED ◀The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance..
BENDABLE ◀The 3/8 transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves..
WIDE APPLICATION ◀ The 6an fuel line is specially designed to be compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..

Check Stock

The Paris Apartment: A Novel

【What You Get:】 10 Pcs per pack of 1/0 Guage (AWG) 3/8″ ring terminals, copper lugs closed end termination ring terminals with 10 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY ....

Check Stock

TEE CSST 1/2 X1/2 X1/2 by PRO-FLEX MfrPartNo PFTE-BBB6

1-piece Retainer Ring that won’t fall off the fitting during installation..
Convenient, hand-tightening followed by ¼ to ½ turn with a wrench to seal the fitting..
Dual-size, inside-tapped fittings - ask any installer how handy this feature can be..
Annealed tube that allows the tubing to bend and stay bent..
Same dual-seal, gasket & O-ring fittings work with both traditional yellow and Flak Jacket products..

Check Stock

z-dup Repair Kit

37˚ DOUBLE FLARING ADAPTERS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ DOUBLE FLARE DIE SETS in 3/16”, 1/4”, 5/16”, 3/8”, 1/2” sizes.
37˚ CONE constructed of high quality machined steel.
CREATE PERFECT PRODUCTION QUALITY FLARES on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft copper tubing.
PRIMARY USES INCLUDE racing, restoration, hot rods, aviation.

Check Stock

DBD-05, Custom Handmade Damascus Steel Billet Knife / Blank Blade Making Bar

That particular piece is annealed , so you can achieve your required results.

Check Stock

Wazakura Annealed Copper Bonsai Training Wire Made in Japan Rust Resistant Outdoor Plant Cable 95.1 ft/29 m roll - 2mm Copper Wire

【Specification】Length: 95.1 feet (29m) | Weight: 10.58 oz (300g) | Gauge: 2.0 mm | Material: Copper (annealed) | Origin: Sanjo city, Niigata prefecture (Japan).
【Made in Japan】Real Japanese bonsai training wire 100% made by artisans and blacksmiths from the city of Sanjo in Niigata prefecture (Japan), area traditionally known for their metalworking skills..
【Bonsai Shaping and Bending Use】The annealed copper bonsai training wire is ideal to use for bending thick branches or shaping the bonsai tree trunk. Copper wire is not as flexible as aluminum wire and can be work hardened quickly. But precisely because of the holding strength, it is great when you try to bend the trunk into new positions, as it will keep shape better..
【Benefits of Annealed Copper】The copper is annealed by heating to a temperature that softens the bonsai wire. This process makes the wire easier to bend and hold branches well without requiring a high gauge, as it would happen if you used aluminum wire.. Annealed copper also tends to fade to a dull brown and match the bonsai trunk, so it's not intrusive and more aesthetically pleasing and the viewer can see more of the tree..
【3 Sizes Available】Depending on your bonsai tree needs and the thickness of the branches an....

Check Stock

Swpeet 15Pcs 6 AWG - 1/4' (M6) Ring Terminals UL Listed Copper Battery Cable Lugs Wire Lugs, Battery Cable Ends Bare Copper Eyelets, Tubular Ring Battery Cable Ends for Enhanced High Temperature

2, High Quality: Made of pure copper tube with strong durability.99.9% Purple Copper, great quality. Heavy Duty Construction for Enhanced High Temperature Durability. Our copper wire lugs are UL UL Tested & Approved, offer reliable performance..
3, Higher Conductivity: Made from 100% annealed electrolytic grade copper for maximum conductivity.These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation..
4, 23 Different Sizes: Close End Pad Seals Out Moisture Keeping Cables Dry. So many sizes to meet your daily needs! Freedom to choose from a variety of wire sizes, stud sizes & pack quantities, that fit your requirements and applications.
Audio wire may not be a direct fit. Recommend to check product dimensions to ensure a proper fit..
5, Wide Applications: Copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. This particular variant has a 1/2"" Eyelet suitable for use with 1 AWG (1 Gauge) Cable & 1/2"" (M12) Stud..

Check Stock

Sanuke 120Pcs AWG 8 6 4 2 Copper Wire Lugs with Heat Shrink Set, 60Pcs Heavy Duty Battery Cable Closed End Tubular Ring Terminals Connectors with 60Pcs Heat Shrink Tubing

☆『What You Get:』In this set, we offer 12types 60Pcs of AWG 2 4 6 8 copper tube end termination ring terminals for your work, 2 sizes 2 colors 60PCS of 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube, meet your different needs..
☆『High Quality:』 All the ring terminals are made of 100% annealed electrolytic grade copper for maximum conductivity, with tinned surface for corrosion protection.Can be Crimped or Soldered.All the 3:1 shrink tube is well made of high quality material, thick and durable.They are for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable.
☆『Reliable and Easy to Use:』Terminals with heavy duty construction improves high temperature durability and closed design seals out the moisture, ensure connection reliability.
high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
☆『Wide Applications :』These battery cable wire lugs are safe and reliable, great for distribution box, marine, golf carts, solar panels, home applications, etc.Heat Shrink Tubing is Ideal Used for Vehicle, Motorcycle, Boat, DIY Electrical Wirings and Other Outdoor Applications..
☆『Keep Organized:』 The 60Pcs 3:1 heat shrink tube....

Check Stock

waltyotur 5c Collet Block Set- Square, Hex, Rings & Collet Closer Holder

PIN: The pin is made from 12 gauge annealed low carbon steel. Made in America..
BASEPLATE: 2" x 2" Square Plate made from glavanized steel..
ADHESIVE FOAM: 1/32" thick double sided foam with release paper..
TEMPERATURE RANGE: 0ºF to 140ºF, LOAD LIMIT: 2lbs per hanger.
Self-locking washers and dome caps sold separately.

Check Stock

Stainless Steel Continuous Hinge with Hole Bright Annealed Finish 6 Feet 3 Inches

Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.
Stainless steel 304 is corrosion resistant up to 1,500 degrees F, weldable, and stronger than steel and aluminum.
Bright annealed finish for additional protection against corrosion and a polished, mirror like appearance.

Check Stock

Stainless Steel Continuous Hinge with Hole, Bright Annealed Finish (2 Feet, 2 Inches)

Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.
Stainless steel 304 is corrosion resistant up to 1,500 degrees F, weldable, and stronger than steel and aluminum.
Bright annealed finish for additional protection against corrosion and a polished, mirror like appearance.

Check Stock