ReviewsAnnular Cutter

ACTOOL 1-1/4\ Diameter × 2\ Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank

  • CARBIDE TIPPED CUTTER- Premium carbide is brazed for superior strength, durability and wear resistance. 1-15/16’’ Diameter x 2’’ Depth of Cut annular cutter include free Pilot Pin..
  • EFFICIENT & PRECISE- Cut holes in steel quickly, precisely and safely. It can cut holes in steel up to 10X faster than standard twist drill bits..
  • EXCELLETN DESIGN- Triple-Cut geometry provide efficient cutting, fast feed rate, less vibration, smooth hole surface and long tool life..
  • WIDELY USE- For smooth and easy cutting almost all types of steel, including materials that are extremely difficult to cut such as stainless steel, titanium, hardened steel and rail steel..
  • UNIVERSAL FIT- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
Check Stock

WICHEMI Annular Cutter Set 3/4 Inch Weldon Shank 2 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Magnetic Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins

  • ✔️ TWO FLATS FOR CUTTER MOUNTING — This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems. The Original Mag Drill Annular Cutter From Which All Others Are Measured..
  • ✔️ GROUNDED & FULLY FLUTED — Provides better chip evacuation, requires less HP and offers better performance in deeper holes..
  • ✔️ O.D. MARGINS — Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish..
  • ✔️ PATENTED HOUGEN-EDGE GEOMETRY — Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles..
  • ✔️ I.D. TAPER — Relief area between slug and cutter. Reduces horsepower and improves slug ejection..
Check Stock

BLUEROCK 13 pieces 1\ HSS Annular Cutter Set, Broach Bits, Magnetic Drill

  • Professional Grade - The Fein annular cutter features enhanced cutting geometry, high quality steel and workmanship to ensure that this will outperform and last longer than standard cutters..
  • Outstanding Performance - It has multiple cutting edges that create accurate, burr-free, high-quality holes that minimize the need for secondary operations such as pre-drilling and reaming..
  • Features - It is made from M2 High Speed Steel for long service life. It includes 11 HSS cutters (7/16.
Check Stock

Accusize Industrial Tools 13 Pc 7/16'' to 1-1/16'' H.S.S. Annular Cutters, 2'' Cutting Depth, 3/4'' Weldon Shank, with 2 Pilot Pins, Strong Case, N2

  • One of each cutting Dia,: 7/16'', 1/2'', 9/16'', 5/8.
Check Stock

Champion Cutting Tool RotoBrute RB30 LittleBrute Low Profile, Lightweight, Portable Magnetic Drill Press: Up to 1-3/8" Diameter, 1-3/16" Depth of Cut

  • Powerful, Lightweight: 23 lbs, Low Profile-Height: 8-1/4", Magnetic Strength: 3300 lbs, Motor Speed: 650 RPM, LED light for improved visibility.
  • Cutter Capacity: 1-3/8" diameter, 1-3/16" depth of cut Recommended for use with Champion Cutting Tool Rotobrute Carbide Tipped and High Speed Steel Annular Cutters.
  • Built in arbor, No-volt release switch for motor on/off, Gearbox housing doubles as a guard Includes carrying case, M8 wrench, M2.5 hex key, M4 hex key, Safety Guard, Removable Handle, Safety Chain.
Check Stock

S&F STEAD & FAST Spot Weld Cutter Kit 3/8 Threaded Shank Depth of Cut 1/4 Cutting Diameter 5/16” 3/8 7/16” 1/2 9/16” 5/8 3/4 Annular Cutter Set for Hand Drill Small Angular Cutter Bits

  • PREMIUM HSS STEEL Drill bit cutters with thick walls made of super hard M2AL High Speed Steel (HRC 66), designed for wear resistance and superior performance.
  • FAST CUTTING AND LONG LIFE Premium spot weld cutters drill 3 times faster than twist drill bits or double sided cutters and last much longer.
  • ASSORTMENT Small annular cutters with 3/8” threaded shank, cutting diameter of 5/16”, 3/8", 7/16”, 1/2", 9/16”, 5/8, 3/4", suitable for cutting up to 1/4” depth.
  • APPLICATIONS Spot face cutter can be used not only for spot weld cutting in auto body panels but also for general hole cutting in sheet metal, piping, conduit, electrical, automotive and HVAC work. Materials suitable for cutting: steel plate, aluminum, cast iron, stainless steel, plastic, laminated materials.
  • STURDY CASE Includes Cutter x 7, Arbor x 1, Pilot pin x 2, Center punch x 1, Small washer x 1, Large washer x 1, Hex wrench x 1.
Check Stock

CS Unitec MABasic 450 Portable Magnetic Drill Press | 1150W 2-Speed Benchtop Power Drill Machine w/up to 1-3/4" Diameter & 6-1/3" Depth of Cut | Oil Bottle Included

  • Powerful, Lightweight: 23 lbs, Low Profile-Height: 8-1/4", Magnetic Strength: 3300 lbs, Motor Speed: 650 RPM, LED light for improved visibility.
  • Cutter Capacity: 1-3/8" diameter, 1-3/16" depth of cut Recommended for use with Champion Cutting Tool Rotobrute Carbide Tipped and High Speed Steel Annular Cutters.
  • Built in arbor, No-volt release switch for motor on/off, Gearbox housing doubles as a guard Includes carrying case, M8 wrench, M2.5 hex key, M4 hex key, Safety Guard, Removable Handle, Safety Chain.
Check Stock

Blue Eyed Salaryman: From world traveller to lifer at Mitsubishi

  • R8 to 3/4" Weldon Shank Arbor for Milling Machine, with Coolant System.
  • For Drill Use Annular Cutters on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shanks.
Check Stock

Grizzly Industrial G0765-7" x 14" Variable-Speed Benchtop Lathe

  • R8 to 3/4" Weldon Shank Arbor for Milling Machine, with Coolant System.
  • For Drill Use Annular Cutters on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shanks.
Check Stock

Accusize Industrial Tools R8 to 3/4'' Weldon Shank for Annular Cutters use on Bridgeport Milling Machine, Mc08-0034

  • R8 to 3/4'' Weldon Shank Arbor for Milling Machine.
  • for Annular Cutters use on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shank.
Check Stock

Steel Dragon Tools® AC2-7PCLG 7PC Annular Cutter Kit Depth 2\ Large Sizes 1\ - 2\ 1 Pin

  • Kit includes six (6) high-speed steel annular cutters and one (1) pilot pin..
  • SDT annular cutters will drill large holes up to ten times faster than regular drills bits..
Check Stock