ReviewsAnsi Hex Head Nut

M10 x 1.5mm Flange Nuts, binifiMux Diameter 10Pcs Serrated Hex Flange Lock Nuts 304 Stainless Steel

  • Made of 18-8 (A2) stainless steel 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Serrations help grip the material surface for easy installation and provide mild vibration resistance..
  • Nuts Height: 0.17 inch, Flange Diameter: 0.42 inch.
Check Stock

binifiMux M8 x 110mm 65mm Half Thread Furniture Barrel Screws Bolt Nuts Assortment Kit for Crib Cot Bunk Beds Chairs 6 Set

  • - Size: M6 x 110mm Hex Key Drive Socket Cap Furniture Bolt.
  • - Product: Slot Head Hammer Furniture Nut Bolt Set.
  • - Package: 10 * Hex Socket Head Cap Screws Bolts, 10 * Barrel Nuts , one hex key.
  • - Widely Used for baby bed, bunk bed, table, chair, crib, cot, or workbench, boards, cabinets, cupboards, other furniture..
Check Stock

Makita A-97156 Impactx 5/16″ x 1-3/4″ Magnetic Nut Driver, 10 Pack, Bulk

  • Magnetic nut driver provides convenient pick-up and retention of hex fasteners.
  • lobular design drives along flats to reduce rounding of hex fasteners.
  • Flat edges at hex opening for full contact with flanged hex head screws.
  • Performance-optimized S2 steel construction for extended life.
  • Calibrated heat treating process for added durability.
Check Stock

GEARWRENCH 5 Pc. Ratcheting Flex Head Flare Nut Wrench Set, SAE - 89100

  • Speed - Ratcheting jaw allows you to advance the flare nut without removing the wrench from the fastener.
  • Strength - The ratcheting flex flare nut wrench design exceeds ANSI specifications.
  • Access - Flex head can be positioned though 180 degrees to access hard-to-reach fasteners and the open end flare nut head slips easily over lines.
  • Ease of Use - Size is stamped on both sides for quick identification.
  • High Visibility - Bright chrome finish is easy-to-clean and provides high-visibility.
Check Stock

GEARWRENCH Ratcheting Flex Head Flare Nut Metric Wrench Set 6 Pc. - 89101D

  • Speed - Ratcheting jaw allows you to advance the flare nut without removing the wrench from the fastener.
  • Strength - The ratcheting flex flare nut wrench design exceeds ANSI specifications.
  • Access - Flex head can be positioned though 180 degrees to access hard-to-reach fasteners and the open end flare nut head slips easily over lines.
  • Ease of Use - Size is stamped on both sides for quick identification.
  • High Visibility - Bright chrome finish is easy-to-clean and provides high-visibility.
Check Stock

Glvaner M6-1.0mm (100 pcs) Thread Size Stainless Steel Hex Nuts Hexagon Nuts Plain Finish Full Thread

  • Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
  • Feel free to contact us if you have no idea about what size to choose..
  • Hex nut is most commonly used nut, normally installed to the end of a bolt or other precision screws. You could also find the matched screws with different head types in our shop..
Check Stock

NINDEJIN 910pcs M3 Male Female Hex Brass Standoff Spacer with Pan Head Screw Nut and Washer Assortment Kit PCB Motherboard Standoff Screw Nut Assorted Kit

  • [Hex Brass Standoff Spacer Assorted Kit]: This kit includes male to female, female to female hex brass standoff spacer, with pan head screw, hex nut, washer, it's convenient for your electronics working, such as printed circuit board and motherboard..
  • [Quality of Standoff Screws]: Standoff spacers are made of brass, screw, nut and washers are nickel-plated, have good corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic. The flat sides of the hex ensure a firm grip when tightening with a wrench..
  • [Motherboard Standoff Screw Using]: In electronics, they are frequently used to raise a printed-circuit board above a surface. Standoffs are ideal fasteners for keeping printed circuit boards both stationary and elevated away from surfaces, such as the interior of a computer chassis..
  • [Standoff Screw Nut Assorted Kit Package ]: Included Male-female, Female-female series, Hex nuts, and flat washers. These fasteners stored in a transparent plastic box, convenient for your storage and use..
  • [NINDEJIN After-sales Service]: If you have any problems with NINDEJIN screws assortment kit, please contact us by email or Q&A, we will give you a professional service and reply to you within 24 hours. We will provide Lifetime technical su....
Check Stock

Concrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated

  • CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
  • CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
  • SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
  • Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check Stock

5/16-18 x 3\ (6 Sets) Stainless Steel Hex Bolts Screws with Nuts Flat Washers Lock Washers, 304 SS 18-8, Hexagon Head, Fully Machine Threaded, Bright Finish

  • Package Contents:6 sets, each include one hex bolt, hex nut, flat washer and lock washer.
  • Screw Length: 3" or 75mm (measured from under the head).
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
Check Stock

500 Pieces Stainless Steel M3 Bolts Nut Washers Kit Hex Socket Head Screws 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm for 3D Printer Quads Drones RC Hobby DIY Project

  • 500 Pieces Stainless Steel M3 Screws Bolts Nut Washers Kit contains: 30-pieces of M3 x 6mm screws, 30-pieces of M3 x8mm screws, 25-pieces of M3 x 10mm....
  • Material: 304 Stainless Steel, rust-proof, non-magnetic..
  • Stainless Steel M3 Screws Bolts Nut Washers Kit can be used throughout many projects like 3D Printer Project DIY Quads Drones RC Hobby, precision....
  • M3 Screw Head: Socket Cap, Screw Drive: Hex Socket, Hex Size: 2.5mm..
Check Stock

M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit,Compatible ASUS Motherboard

  • M.2 Standoff and Screw for motherboard NGFF/NVMe Kit,Screw specification M2*3 (mm).
  • compatible Asus13020 M.2 SSD Mounting Kit Standoff + Screws for Motherboard ..
  • M.2 Screw + Screw Hex Nut Stand Off for motherboard NGFF.
  • Application: Perfect for universally laptop notebook repair, applied in electronics, computers, PC board, DIY hobby etc..
  • Package Content:Hex head jackscrews*4、Flat head Screws*4、Transparent screw washers*4、Screwdriver*1.
Check Stock