ReviewsAnsi Hydraulic Hose Fittings

Dometic SeaStar Pro Hydraulic Steering Kit, HK7500A-3

Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.

Check Stock

Mophorn Helm Outboard Hydraulic Steering Pump 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats

Front Mount Pump: This helm is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also suitable for speeds up to 60 MPH. The helm allows you to install all of the reliability and comfort of hydraulic steering onto your boat. Get ready to take your boat to the next level..
1.7 Hydraulic Helm: Our front mount 1.7 hydraulic helm provides smooth and efficient no feedback steering for single and multi-outboard engines up to 300 HP (600 HP combined for counter rotating twins) for speeds up to 60 MPH. 4.9 turns lock-to-lock in most typical single cylinder outboard applications..
Shaft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing..
Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use..
Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be....

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

...wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

Check Stock

RSN Bleed Kit for Nutt Hydraulic E-Brakes Zero Scooters with Mineral Oil

Looking to bleed your NUTT hydraulic e-brakes on Zero scooters with ease? This kit is for you with the essentials to get the job done. A special feature of our kit is the flexible silicone hose, which offers a very secure attachment to the bleed nipple. Join over 100,000 riders who have bled their brakes with us!.
➤ 60ml mineral oil, 2 reusable 20ml syringes, 2 hose fittings.
➤ 3mm, 4mm, 5mm Allen wrenches, T10-T15 torx wrench, bleed block/rotor correction tool.
➤ pair of hook and loop fasteners, pair of gloves.
COMPATIBILITY: Works with E-Brakes on Zero Scooters..

Check Stock

IBOSAD Hydraulic Hose Crimper Hydra-Krimp 71500 Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool

The lightweight hand-held hydraulic press is very portable..
Crimping pipes and fittings in an easy and labor-saving way..
The kit is applicable for beadlocking fitting and barrier A/C hose..
The dies snap quickly into the press fixture requiring no pins or screws..
The Kit comes with a complete set of dies covering hose sizes: 6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.Always wear safety goggles when operating.

Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

Economical general-purpose fitting sealant.
Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
Remains pliable at higher and lower temperatures.
Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.

Check Stock

Mophorn Hydraulic Steering Cylinder HC4645H Front Mount Hydraulic Outboard Marine Steering Cylinder Suit for Up to 150HP Boats Steering

HC4645H Front Mount Cylinder: HC4645H steering cylinder is ideal for outboard powered boats like center console, offshore fishing, bass boats, flats boats and many more. For use with Yamaha applications where it is necessary to mount the steering cylinder underneath the steering arm..
Advanced Crush Resistance: Our hydraulic outboard steering cylinder provides excellent resistance to repeated compression set and is designed to better withstand the harsh marine environment..
Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
ORB Fitting: The Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing. And we put two extra tubes for easy installation and replacement..
Sturdy Aluminum Alloy: The hydraulic steering cylinder is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Enjoy the steering helm for years to come..

Check Stock

Loc-Line - 49421-BLK Coolant Hose Component Black Acetal Copolymer Coil 1/4 Hose ID 50 Length

Continuous 50' length coil of 1/4" inner diameter Loc-Line modular hose.
Connects to Loc-Line fittings or another Loc-Line hose segment.
Acetal copolymer plastic has a black color, resists corrosion and moisture, and can be used with acetone, alcohol, ethyl, greases, oils, commercial dish detergents, gasoline, lacquer solvents, and sodium hydroxide.
Maximum operating temperature of 170 degrees F.
Material meets NSF/ANSI standards 14, 51, and 61 for drinking (potable) water.

Check Stock

Tefen 12256704083 Nylon 66 Hose Fitting Adapter Gray 1/4 Hose ID x 1/2 NPT Female Pack of 10

Adapter for connecting hose or fittings of different types.
Connects to hose on one end and a male NPT threaded connection on the other.
Nylon 6/6 for lightweight, strength, and resistance to corrosion from most chemicals and solvents.
Maximum operating pressure of 200 psi (14 bar) at 68 degrees F (20 degrees C) in a temperature range of -5 to +230 degrees F (-20 to +110 degrees C), subject to application.

Check Stock

OKBA 64pcs JIC 37° Flare Thread Cap&Plug Kit,37 Degree JIC Cap and Plug Assortment Kit Precision Threading Hydraulic Hose Tube Pipe Adapter AN Fittings Set Kit Dash Sizes 04 06 08 10 12 16

64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes.
A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems.
The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion.
Packed in a plastic carring storage box case and with size chart with thread sizes,keeps all 37° JIC caps & plug fitting organized with dash sizes: 04, 06, 08, 10, 12,16.
Package including:#4 (7/16-20) JIC caps&plugs---each 10PCS| #6 (9/16-18)caps&plugs ---each 8PCS| #8 (3/4-16)caps&plugs---each 6PCS| #10 (7/8-14)caps&plugs---each 4PCS| #12 (1 1/16-12) caps&plugs---each 2PCS| #16 (1 5/16-12) caps&plugs---each 2PCS.

Check Stock

Refrigerator water line - 15 FT Premium Stainless Steel Braided Ice Maker Water Hose,Food grade PEX Inner Tube Fridge Water Line with 1/4 Fittings for Refrigerator Ice Maker

【Potable Drinking Water Use】:Our ice maker hose is BPA free，the inner tube made by food grade PEX materials, non-toxic ingredients,odorless and....
【Multiple Applications】:The 1/4" fittings water line is perfect for linking existing 1/4" outlet angle stop valve or other 1/4" outlet water....
【Easy Installation】:The icemaker water line each end has brass 1/4" compression fittings and built-in high-quality sealing ring ,ensure a securely....
【Rust-proof and pressure-resistant】:The outer layer is wrapped with superior grade 304 stainless steel braided wire,make the tube have excellent....
【Safety and warranty】:Our drinking water hose have tested to meet NSF/ANSI standards and BPA free,and come with a 5 year warranty.

Check Stock