ReviewsAnsi Stainless Flange

Korky 6000BP Universal Toilet WaxFree Seal with Hardware - Toilet Installation Made Easy - Made in USA , Red

  • Set-Rite kit extends toilet flange surface above finished floor.
  • Corrects improper flange height during repairs and remodels.
  • For existing PVC, ABS, cast iron or stainless steel ringed flange.
  • Creates optimum sealing with a standard wax ring.
  • Corrects flange height from 1/4 in. to 1-5/8 in..
Check Stock

JET 2-HDT 2-Ton Manual Trolley 262020

  • SAFETY: Built-in bumper guards on the side plates increase safety, and extend trolley life..
  • VERSATILITY: Easily adjusts to wide-flange H-beams, standard I-beams, or curved track..
  • DURABILITY: Welded all-steel frame and powder coat finish provide maximum protection..
  • CERTIFICATION: Load-tested to 125% of capacity with certificate..
  • COMPLIANCE: Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards..
Check Stock

FGJQEFG Exhaust Flange Bolts Quick Fix Repair Pipe Kit w/Gasket & Hardware 2'' Inch OD 3 Bolts T304 Stainless Steel Universal Flange Replacement Kit

  • 【High-Quality】The Flange is Made of high quality stainless steel material for perfect durability and strength, not easy to deform..
  • 【Size】Bolt Hole Center to Center: 2 3/4".
  • 【Easy to Use and Install】Quick Fix Flange is easy to use with equipped springs and bolts, wonderful replacement for the previous one..
  • 【Wide Application】Universal for most vehicles and can repair your car very well and effectively..
Check Stock

LQS Extended Sink Flange, Deep Garbage Disposal Sink Flange for Kitchen Sink, Fit for 3-1/2 Inch Standard Sink Drain Hole, Golden Deep Sink Flange

  • Golden extended sink flange, suitable for quartz farmhouse sink and kitchen sinks with stainless steel material..
  • Garbage Disposal Sink Flange fits standard garbage disposal units, 4-1/2-Inch(114mm) rim diameter, 2-5/8-Inch(66mm) depth, deep sink flange..
  • Fit for 3-1/2 inch standard sink drain opening..
  • Coordinates with golden composite sinks and stainless steel sinks..
Check Stock

Vinyl Fence Gate Latch (White) by Nationwide Industries

  • Stainless steel with marine grade powder coat paint. Reversible mounting (right or left handed).
  • Strike Flange: 3.12(W)x3.5(H)x1.38(D) inches.
  • Latch Flange: 1.88(W)x5.5(H)x1.5(D) inches.
Check Stock

JQuad 4 BBQ Smoker Air Vent Stainless Steel - Pinwheel Grill Damper for Increased Airflow

  • 4" Wide Vent Opening with 1/2" Wide Mounting Flange. Overall Width with Flange 5".
  • Stainless Steel For Optimal All Weather Durability.
Check Stock

SpzcdZa 150pcs 304 Stainless Steel Serrated Hex Flange Nuts Flange Metric Hex Lock Nuts Assortment Kit (M3 M4 M5 M6 M8 M10 M12)

  • High-quality 304 Stainless Flange Nuts Assortment Kit.
  • The Package Contains 7 Sizes, Included: M3 M4 M5 M6 M8 M10 M12.
  • Package Content: 150Pcs x Hex Flange Nut.
  • Flanged Nut serves to distribute the pressure of the Nut over the part being secured, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface..
Check Stock

OATEY 43401 Set-Rite Toilet Flange Extender Kit, 1/4\ - 1\

  • Corrects an improper flange height from 1/4 in. - 1 in. during repair and remodels.
  • Easily extend the flange surface above the floor for optimum sealing with a standard wax ring.
  • Use on existing PVC, ABS, cast iron, and stainless steel ringed flanges.
  • Spacers can be combined to meet the desired height.
  • Foam rubber gasket seals the spacers to the new flange.
Check Stock

JET 1-PT, 1-Ton Heavy-Duty Manual Trolley (252010)

  • Compatibility: Easily adjustable to wide-flange H-beams, standard I-beams, or curved track..
  • Extended Life: Built-in bumper guards on the side plates..
  • Smooth Movement: Hardened large steel wheels and thicker double sealed lubricated ball bearings..
  • Maximum Durability: Welded heavy gauge steel frame and powder coat finish..
  • Certified Safety: Complies with OSHA Regulations, and ANSI / ASME B30.11 and B30.17 standards..
Check Stock

SHENGHUISS Boat Thru Hull Fittings for 1/2" Hose Marine Stainless Steel 316 Barbed Extra Long Straight Thru-Hull with Nut&Custom Gasket for Boat、RSV

  • Material: Marine grade Stainless Steel 316, Surface: Mirror polished/High polish finish.Ultimate Corrosion Resistant..
  • Overall Length:3.6inch(92mm), Thread length:2.5inch(64mm), Barb length: 1inch(25mm),.
  • Outside flange diameter: 1.5inch(38mm), Barb diameter: 25.4 mm / 1'', Thread Size: 0.8 inch(22mm) , Weight: 4.8 oz(136 g).
  • The Barbed long Straight Thru-Hull fits 3/8" inner diameter marine hoses. Includes 316 stainless steel mounting nuts and rubber gasket,installs easy..
  • Underside of flange has a groove cut in it to trap a bead of silicone between it and the mounting surface. Flange head is very evenly polished. Nut mates with threads exactly.
  • hardness of metal is excellent. Two slightly protruding pins within the interior of the drain allow for a wide blade flat screwdriver to be inserted and prevents the flange portio from turning when nut is installed..
Check Stock

Ideal Tridon 5620051 Stainless Steel Quick Release Clamp with Steel Screw, 3/4\ to 1-3/4\ Diameter, 9/16\ W (Pack of 10)

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS 304 Stainless Steel Flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange and allow unrestricted air flow..
  • HPS Stainless Steel V-Band Clamp Kit with Stainless Steel Flanges includes 304 Stainless Steel Quick Release V-Band Clamp, Male/Female Stainless Steel V-Band Flange Set, Non-locking Nut and Self-locking Nut.
Check Stock