UltraSource Stainless Steel Heating Element w/ Dial, 1500 W
- Adjustable dial allows for precise control of temperature.
- Fits either a 1″ NPT flange or a 1-¼” opening with a lock nut and gasket included.
ReviewsAnsi Stainless Flange Nut
keenso Well Nuts, 6pc M4 Durable Rubber Well Nuts Universal Premium Brass Windshield Bolts for Motorcycles Kayak Canoe Boats
- ☆【BUILT-IN BRASS MATERIAL】：Made of high-quality brass, the nut is firm, tough, resistant to deformation, and durable..
- ☆【WEAR-RESISTANT RUBBER】：The nut bushing is made of high-quality rubber, which is very wear-resistant and tough..
- ☆【ISOLATE VIBRATION AND IMPACT】：This set of nuts is used to seal holes or isolate vibration and impact, which can effectively reduce noise..
- ☆【FLANGE FACINBG OUTWARD】：The flange end of the nut faces outward, and the entire assembly can be firmly fixed in the blind hole without burrs..
- ☆【AN USEFUL ACCESSORY】：The nut can be easily disassembled, suitable for motorcycles, kayaks, canoes, etc. It is a very useful accessory..
High Pressure Handheld Shower Heads 5 Spray Settings High Flow Shower Head with 60\ Stainless Steel Long Hose,Adjustable Bracket,Chrome
- ...ered shower head can give you a relaxing shower experience..
- 【Premium Material】: The detachable shower head is made of rust-proof ABS material, which with exquisite chrome plated surface makes it lightweight and more durable. The angle-adjustable bracket allows you adjust the angle and direction as you like. 58" stainless steel hose with chrome finish resists corrosion and tarnishing..
- 【What’s in the Package】: The 5-functions high pressure handheld shower head, 60" stainless steel hose, adjustable overhead bracket, standard shower arm and flange..
- 【Easy Connection】: G 1/2 thread fits all US standard shower pipe. Rubber washers has been preinstalled in the end of hose. Install easily within 10 minutes without plumber. Note：Conical nut (long hose nut) should be connected with the shower head, Hex nut nut(short hose) should be connected with the shower bracket. Please connect the right end of the hose..
Glvaner M8-1.25 x 30mm Length (15 pcs) Alloy Steel Flanged Washer Head Hex Bolts, Extra-Large Washer Head, 10.9 Grade Black Oxide Finish GB5789 Full Thread
- Screw Length: 30mm (measured from under the head).
- Material: 10.9 Grade alloy steel and Black Oxide Finish GB5789, greater strength than stainless steel and provide good corrioion resistant in dry environment..
- The extra large washer head helps to distribute the load. The one-piece design eliminates the need of a separate washer and can be more efficient and easier to use. A washer is still needed on the nut side. You could also easily find the stainless steel flange nuts in our store..
QiiMii Stainless Steel 304 Heavy Duty Tri Clamp Clover Single Pin with Wing Nut for Ferrule TC 2 inch 10 pack
- Tube OD: 2 Inch, Flange Size: 64MM, Fits 2 Inch Tri-clamp.
- Type: stainless steel 304 Single pin heavy duty clamp with cross hole wing nut.
- Fit for all other homebrew stuff sanitary fittings.
- Free Bonus: Buy Clamps, Get Gasket For Free.
Angle Grinder Extension 5/8-11, 2 pcs 4-1/2 Inch Angle Grinder Lengthen Connecting Rod , 45# Black Steel Material, Seamless Docking, Easy Installation 80 mm *1 And 120 mm * 1
- Angle Grinder Extension Connecting Rod Size: 【Important】Before buying, please check the size, Fit for a spindle size of 5/8" - 11" and FIT FOR MOST 4-1/2"-5" Grinding Wheels, Inner thread 5/8" - 11", Outer thread 5/8" - 11",Overall length 80 mm * 1 + 120 mm * 1.
- Great for Deep Areas: The rotating extension shaft to use conveniently with 5/8" 11 threaded power tools. Can be used for grinding and polishing deep stones such as inside corners and special shapes..
- Easy To Install: ①Install the extension rod ②install the Grinder Inner Flange Nut ③install the Grinding Wheels ④install the Grinder Outer Flange Nut ⑤use the Spanner to fix the Grinder Outer Flange Nut..
- Material: Made of high quality carbon steel, more strength and resistance to deformation.The 2022 upgrade model improves the shortcomings of the previous product's shaking..
- Package Includes and Transportation : Angle Grinder Extension Connecting Rod *2 , Packaging: special plastic box packaging,We use the fastest express, usually 10-15 days to complete the delivery..
Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel
- Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
- No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
- Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
- Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
- WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Angle Grinder Flange Nut 5/8 for compatible with Ryobi Inner Outer Flat Adapter Nut Replace 224399-1 193465-4 224568-4 9005BZ 9015B (6 Pack)
- ★UNIVERSAL FIT:Angle Grinder Flange Nut 5/8 for compatible with Ryobi Inner Outer Flat Adapter Nut.
- ★WORKS FOR BRAND: for compatible with Makita 224399-1, 193465-4, 224568-4, Angle Grinder 9016B Grinder 9049 Grinder 9067L Angle Grinder 9077SL Angle Grinder 9564 Angle Grinder GA7021 Angle Grinder.
- ★REPLACE:for compatible with Makita 9005BZ Grinder 9015B Grinder 9505BH Grinder 9527PB Grinder 9527NB Angle Grinder 9015DB Angle Grinder 9561CV.
- ★The part/product is not sponsored or endorsed by,or affiliated with the brands it fit,including Ryobi, Makita.
- ★PACKAGE INCLUDES:3 pcs inner angle grinder flange nuts , 3 pcs outer angle grinder flange.Non original aftermarket part.
Angle Grinder Extension Shaft Set, 80 mm ,120 mm,5/8"-11 Thread Connecting Rod for 4-1/2 Angle Grinder ,Rotary Polisher,Car Polisher,45# Steel Material, Seamless Docking, Easy Installation
- Angle Grinder Extension Connecting Rod Size: 【Important】Before buying, please check the size, Fit for a spindle size of 5/8" - 11" and FIT FOR MOST 4-1/2"-5" Grinding Wheels, Inner thread 5/8" - 11", Outer thread 5/8" - 11",Overall length 75mm (2.95nch).
- Great for Deep Areas: The rotating extension shaft to use conveniently with 5/8" 11 threaded power tools. Can be used for grinding and polishing deep stones such as inside corners and special shapes..
- Easy To Install: ①Install the extension rod ②install the Grinder Inner Flange Nut ③install the Grinding Wheels ④install the Grinder Outer Flange Nut ⑤use the Spanner to fix the Grinder Outer Flange Nut..
- Material: Made of high quality black carbon steel, more strength and resistance to deformation.The 2022 upgrade model improves the shortcomings of the previous product's shaking..
- Function: By using the Angle grinder extension connecting rod, the functionality of the angle grinder can be expanded and a foundation can be laid for using other attachments..
Lenink 5 Pcs Wrench Grinder Shaft Nut Angle Grinder Wrench with Metal Outer Inner Lock Nut Kit Compatible with Dewalt Milwaukee Makita Black & Decker Bosch Ryobi
- Compatibility: Grinder flange wrench kit compatible with Dewalt Milwaukee Makita 193465-4 Bosch Black & Decker Ryobi ,9029 Grinder 9069 9016DB 9047L....
- Compatibility: Compatible with Makita 224399-1, 193465-4, 224568-4 parts. Compatible List is provided below for reference, Here is compatible list:....
- Premium Material: This Grinder flange wrench kit is made of high quality metal material, which is durable, safe and not easy to damage.
- Practical: Easy to install and use without other tool, maintaining the good performance of your angle grinder with our grinder wrench and flange nut....
- Package Include: 1 adjustable spanner wrench, 3 metal outer inner lock nut kit. Please kindly check the size and compatibility before purchasing.
1/4-20 Rivet Nuts Large Flange Blind Threaded Insert Grip Range 0.165-0.260 - Zinc Plated Carbon Steel Flat Head Nutsert Rivnut Quantity 25 RoHS Compliant - by Newport Fasteners
- Flat Head Thin Nut Large Flange Round Body Linear Knurles Threaded Insert - 1/4-20 UNC Thread Size / Grip Range (min-max) .165-.260.
- Ideal Rivet Nut for Panel Thicknesses from .165-.260 inches (Grip Range .165-.260).
- Large Flange Thin Knurled Body Thin Wall Series.
- Material: Zinc Plated Carbon Steel used for general purpose applications with higher temperature resistance.
- Open End Round Rivet Nut with Linear Grooves and a Flat Head Style (most popular) - provides a good bearing area for application and for bolted on parts.