ReviewsAnsi Standard Bolt

Kwikset Vancouver Low Profile Front Lock Handleset with Microban Including Slim Modern Halifax Door Lever Handle Featuring SmartKey Security, Iron Black 98180-015

  • Vancouver has a low profile contemporary design and is 50% lower profile than standard deadbolts.
  • Certified highest security, durability and finish – ANSI/BHMA Grade AAA deadbolt.
  • Adjustable through bolt design for worry free installation. Deadbolt bore hole and handle set hole must be 5-1/2" apart for proper installation.
  • Microban product protection keeps door hardware 99.9% cleaner than unprotected surfaces. For use on exterior doors where keyed entry and security is needed.
  • Featuring Smart Key Security, which protects against advanced break-in techniques and allows you to re-key your lock yourself in seconds.
Check Stock

Mul-T-Lock MT5+ Hercular Single Cylinder deadbolt w/Thumb Turn - Bright Brass

  • Special Edition - Oil Rubbed Bronze Lock AND Cylinder! Much better looking than the standard brass cylinder in the original lock!.
  • High Security Dead Bolt - key cylinder is drill, pick and bump resistant, unlike the cheaper version (Junior) Mul-T-Lock Deadbolt. Fits doors from 1-3/8" inch to 1-3/4" inch. Includes two (2) Mul-T-Lock Interactive Plus keys and one key duplication card. Drill, pick and bump proof High Security Mul-T-Lock cylinder. UL Fire rated, ANSI Grade2- Mul-T-Lock is a ASSA ABLOY Group Brand..
  • Can be purchased as Single Deadbolt (2 keys included), Two Deadbolts Keyed Alike (4 keys included) OR Three Deadbolts Keyed Alike (6 keys included)..
  • Additional keys can be ordered after receiving the lock using the provided Key Duplication Card..
Check Stock

Vestil FL-ADJ-46 Adjustable Height Floor Lock, Heavy Duty Cast Steel, 6-1/4\ - 8\ Extended Height, 5-1/2\ to 7-1/4\ Retracted Height, Silver

  • Stainless steel automatic, non-handed flush bolt with a satin finish for securing a pair of metal doors at the top.
  • Thermal lock automatically locks the inactive door under high heat conditions due to fire.
  • Opening the active door automatically retracts the bolt.
  • Measures 6-3/4" high x 1" wide and bolt head rod is adjustable up to 1-1/2".
  • Meets ANSI A156.3: Type 25 specifications.
Check Stock

2 Pack Knobonly Stainless Steel Flat Ball Door Knob Brushed Nickel Finish (Key Alike Entry Door Handles)

  • Perfect Design: 2 Pack keyed same entry door knobs in satin nickel finish with classic & contemporary design, solid column security bolt for anti-sawing protection and higher security..
  • KEYED ALIKE Entry Exterior Door Handles with Keys: Both sides are locked and unlocked by outside key or inside turn-button. Confirm with ANSI Grade 3, Exceeds 200,000 cycles..
  • Reversible & Standard Size : Fits Either Right Hand Or Left Hand Doors, Adjustable Backset - 2-3/8 inch or 2-3/4 inch (60mm or 70mm).
  • Fits doors thicknes:1-3/8 inch to 1-3/4 inch (35mm to 45mm).
  • Durable & Portable Satin Nickel Finish Handle Set: Designed to complement both conventional and modern style doors for commercial and residential handleset applications, steel mounting plate provide strength, simple knob design for easy operation..
Check Stock

BILT HARD 301cc 10HP Gas Powered Engine, Horizontal 4 Stroke OHV Gas Motor, Shaft 1" Diameter, 3.48" Length, 1/4" Keyway, Replacement for Go Cart, Compressor, Log Splitter, Pressure Washer

  • OUR MOST POPULAR 7HP GAS POWERED ENGINE- 7HP OHV 4-Stroke Recoil Starting Gas Engine is designed for all DIY or Professional applications. Capable of delivering Powerful Torque & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear th....
Check Stock

Public Safety Reflective Vest, High Visibility, ANSI Compliant, Breakaway, 6XL/7XL, Ergodyne GloWear 8245PSV,Orange

  • ANSI COMPLAINT Meets ANSI/ISEA 107-2015 Type P Class 2 standard which is designed for Emergency and Incident Responders and Law Enforcement Personnel.
  • SHORTER DESIGN The ANSI/ISEA Type P standard allows the vest to be shorter providing quicker and easier access to service belts.
  • INCREASED SAFETY AROUND SNAG HAZARDS 5-point breakaway designed to easily remove in the event it is caught or grabbed.
  • DURABLE AND BREATHABLE ANSI complaint Polyester mesh (3.3 oz./112 gsm).
  • VERSATILE STORAGE Webbing tab on upper left chest for mic, glasses or pen storage and 1 interior multi layered pocket.
Check Stock

Pyramex RVZ2210X3 Class 2 Safety Vest with Zipper, 3X-Large, Hi-Vis Lime

  • Meets American National Standard for High Visibility Safety Apparel: ANSI /ISEA 107 - 2010 / Class 2 Level 2.
  • Hi Vis lightweight polyester mesh material for comfort.
  • ANSI Compliant 2 inch silver reflective material with contrasting color trim.
  • Meets American National Standard for High Visibility Safety Apparel: ANSI/ISEA 107 - 2010/Class 2 Level 2.
Check Stock

AlphaWorks Gas Engine 7HP Motor Horizontal 4 Stroke OHV Recoil Start 3600RPM 8.85Ft-Lbs/12Nm Torque 3/4\ x2.43” Shaft 3/16\ Keyway 5/16”-24 UNF End Tapped Go Kart Log Splitter EPA/CARB Certified

  • OUR MOST POPULAR 7HP GAS POWERED ENGINE- 7HP OHV 4-Stroke Recoil Starting Gas Engine is designed for all DIY or Professional applications. Capable of delivering Powerful Torque & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
Check Stock

Aquacera NilusTwo Twin Undersink Water Filter with CeraMetix & AquaMetix

  • Chloramines >99% ANSI Standard 42—Capacity 1200 gallons* Chlorine >99% - Will remove chlorine for the life of the filter* Lead >99% ANSI Standard....
  • VOC—Volatile Organic Compounds Metals—Aluminum, Iron, Mercury, Nickel & Zinc This filter has the ability to reduce fluoride, arsenic, cadmium,....
  • NSF 61 Certified materials Meets or Exceeds NSF/ANSI Standards 42 & 53 for the following: > 99% Chloramine reduction - 3ppm challenge > 99% Chlorine....
  • 99% Fluorinated Organic Acids (PFOA & PFOS) >99% Micro plastics Filters should be replaced annually.
Check Stock

Dye M3+ Paintball Marker - Battleship 2.0

  • FL-21 Bolt - The FL-21 Bolt System with an all-new 2-Stage Flex Face Bolt Tip sets a new standard for dependability and performance. Designed to operate across the widest range of extreme conditions, the FL-21 bolt provides unmatched performance without sacrificing reliability..
  • Flex Face Bolt Tip - The all-new 2-Stage Flex Face Bolt Tip within the FL-21 Bolt System maintains ideal bolt speed throughout the bolt cycle. A slow, soft first stage for optimal paint handling and a second stage with a speed boost to maximize valve lift operation..
  • Quick Release Bolt - The proven Quick Release Bolt Assembly is a robust steel gate system that securely hold the bolt in place. A simple push button system allows the user to remove and re-install the bolt kit in seconds. Standard maintenance has never been easier or more accessible..
  • SLAP ASA Slide Lock AirPort - DYE’s Slide Lock AirPort (SLAP) ASA is all-new for the M3+. The new enclosed SLAP design provides longterm dependability in a rugged and easy-to-operate package. The shielded design has no button to operate, no knob to turn and no lever to get snagged. All critical operations are protected by the Slide Lock Cover. Simply press and slide the lock cover back to engage the air supply with ease..
Check Stock

Forster Products NATO Chamber Headspace Gage, Rimless, Hardened Steel, Precision Ground, 7.62 NATO Maximum

  • 7.62 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. These rimless chambers require a slightly longer maximum headspace than commercial 308 Win calibers. The 7.62 NATO Headspace Gages do not conform to SAAMI tolerances..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015..
  • QUALITY ASSURED: Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..
Check Stock