ReviewsAnsi Welding Neck Flange

Lincoln Electric Welding Cap| Mesh Inside Liner | All American Print |K3203-ALL

Price For: Each Welding Helmet Light State: 3.0 Item: Welding Helmet Headgear: Ratchet Welding Helmet Material: Nylon Welding Helmet Type: Auto-Darkening Color: silver Features: 1 1/2" IPS, Slip Union Connectorson both Inlet and Discharge Ports Includes: 45 Degrees Beveled Edge Lens Shade: 8 to 13 Viewing Area: 3.74" x 1.38" Graphics: None EN379 Classification: 1/1/1/2.
Standards: ANSI Z87.1-2015 Welding Helmet Color: Silver Battery Life: 1500 hr. Electromagnetic Sensor: Yes Switching Speed: 1/20, 000 sec. Power Source: Battery TIG AMP Rating: 640 ADF Controls: Digital Number of Arc Sensors: 4 Grind Mode: Yes Battery Type: 640 Country of Origin (subject to change): South Korea.

Check Stock

3M Speedglas Welding Helmet 9002NC, 04-0100-20NC, with Natural Color Technology Auto Darkening Filter for MMAW TIG MIG Welding Helmet

PRECISION WELDING OPTICS - Advanced natural color auto-darkening optics adjust to your working conditions for a lighter, brighter and more realistic view that may help you have better control of the weld puddle.
REDUCED LENS FOG - Exhaust vents have been built into the welding helmet to help reduce lens fogging.
LASTING COMFORT - Provided by improved, ergonomically-designed suspension for a precise fit. A smooth action ratchet allows for suspension tightening even while wearing welding gloves.
LIGHTWEIGHT - Less stress for extended wear time, weighing just 1.1 lbs or 17 ounces.
SLIM PROFILE - Work in tight spaces more easily with a shield width of 9.29 inches (23.6 cm).
ANSI Z87.1-2015 - Approved for eye and face protection.
ANSI Z89.1 - Approved when used with an approved hard hat.
For Industrial/Occupational Use Only — Not for consumer sale or use..

Check Stock

Weld-On 14030 Plumbing PVC/CPVC Primer - Fast Acting and Low VOC, Clear, 1 Quart (32 fl oz)

Fast-acting plumbing primer pre-softens surfaces to ensure proper PVC/CPVC welding - an essential first step before application of plumbing solvent cement.
Quickly dissolves joining surfaces to promote maximum fusion between pipe and fitting during welding.
Clear color helps prevent staining while priming.
Compatible with all schedules, sizes, and classes of PVC and CPVC.
Meets SCAQMD Rule 1168/316A, ASTMF656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
contributes toward satisfying Indoor Environmental Quality credits for LEED v4.

Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..

Check Stock

RIDGID 40220 461 Straight Pipe Welding Vise, 1/2-inch to 8-inch Pipe Welding Clamp,Red,Small

Designed for secure clamping onto straight pipes.
pipe welding vise is available in straight, angle, elbow and flange styles.
Constructed of durable, performance-proven material for reliable, long-lasting use.
Straight welding vise resists strain, heat and warping during tacking.
Machined swivel nuts and pins combined with special chain screws allow for smooth, trouble-free vise assembly onto the pipe.
Straight pipe welding vise has a 1/2-inch to 8-inch (15 mm to 200 mm) pipe capacity.

Check Stock

TFCFL Turntable Table, DC24V 20W Rotary Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding (10KG)

√【Smooth Rotation】This Rotary Welding Positioner is driven by 15W High-quality DC motor, rotate smoothly & stable.
Rotating speed: 2-10 r/min, has knob for 1-10 level stepless speed adjustable. High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision..
√ 【Tiltable Table】0-90º table turning angle tiltable of welding positioner, can fix it at any angle with tilt lock wrenches.
manual workbench rollover, 18cm worktable, compatible KC-65 or KC-80 chuck. BY series Light Positioner is mainly used for welding of annular weld..
√ 【Easy Operation】Structure of precision, light weight, easy to operate, flexible to use. The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
√ 【High Accuracy】The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding. Using foot switch control table rotation, easy to control rotation.
Clamp and worktable Choose simple mechani....

Check Stock

Jackson Safety 46131 Insight Variable Auto Darkening Welding Helmet, HaloX ,Black

1 Jackson Safety Insight Variable ADF Helmet / Order.
Variable shade (9 13), wide viewing area (3.93″ x 2.36″), sensitivity and delay adjustments, four (4) independent auto dimming sensors and easy to use digital controls.
Choose from grind and weld modes (use it for mig welding, tig welding and arc welding) on this value centric welding mask.
Jackson Safety W40 INSIGHT Variable Auto Darkening Welding Helmet is compatible with the HLX100 and HSL 100 shells.
Gives you the compliance you’re looking for, since it meets ANSI Z87.1+ standards and is CSA compliant.
The Auto Darkening Filter (ADF) enables welders to adapt to various working environments by controlling the shade of the lens, with adjustments for sensitivity from ambient lighting sources.

Check Stock

Antra True Color Top Optical 1/1/1/1 Wide Shade 3/5-14 with Shade Lock Large Viewing 12.5 SQI Digital Solar Power Auto Darkening Welding Helmet DP9-1X TIG MIG/MAG MMA Plasma 6+1 Extra lens covers

【Reliability & Productivity】POWER OFF DELAY to avoid flashes in the low ambient environments.
INTERFERENCE SUPPRESSION Technologies to minimize false triggering: less sensitive to sun lights, workshop lights but very responsive to welding arc with extremely LOW DC TIG Rating (> 2 A).
Corner-Spread arc sensors provide more coverage, to overcome positions with blockage.
【Performance】4 Premium redundant arc sensors, with highly responsive detecting and controlling units providing super-fast switching time, accurate shading and CRYSTAL CLEAR puddles, eliminating harmful radiant bypass, avoiding eye stress.
Very low power consumption with ZERO battery reverse charge.
Optimized high output solar panel helps to extent the battery life efficiently..
【Comfort & Convenience】Luxury large viewing area fully automatic lens 3.86X3.23" (12.5 SQI), easier to have a clear view of joints and weld puddle, getting better control on the whole welding process.
SHADE LOCK turns the helmet to a fixed shade helmet temporally (5-14).
SHADE TEST button to check how the lens responses to t....

Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

...on: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation steps are simple and convenient..

Check Stock

Fujikura New Model FSM-38S V-groove Alignment Welding Fusion Splicer with CT-50 Cleaver and other accessories.

【Specification】Input voltage: 110V 60HZ Horizontal loading capacity：10KG/22lb Vertical loading capacity：5KG/11lb Working table tilting angle：0-90° Table diameter: 180MM Worktable height: 220MM Worktable speed: 2-10 r/min Rated welding current：80A Drive motor: DC24V 20W Table turning angle: Table turning angleWorkbench rollover: Manual Rotary motor: 15W Dimensions: 370x270x215mm.
【Description】BY series Light Positioner is mainly used for welding of annular weld. The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding. The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
【Feature】1.Speed regulation. 2.Structure of precision, easy to operate, flexible to use. 3.Especially suitable for under 10KG flange, steel pipe and other seam welding. 4.High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision.
【High Positioning Accuracy】Light weight, e....

Check Stock

Frontline Fall Protection RO18 Multifunction 18\ Pole Commercial Roof Anchor | OSHA & ANSI Compliant Galvanized Steel Roofing Anchor Point | Metal, Wood or Concrete Application

✅The anchor is made up of ASTM rated steel, making it high strength and reliable.
✅The anchor contains a ASTM rated hot dip galvanized finish, making it great for exterior or indoor use and all the different weather conditions.
✅Welding on anchor performed by AWS certified welders and processes to ensure quality welding and upmost compliance.
✅Application: Metal, wood or concrete structures, great for exterior or indoor use.
✅Meets or exceeds ANSI Z359.1, ANSI A10.32-2012, OSHA 1926.502, OSHA 1910.140-Tested by an Independent 3rd Party Lab accredited to ISO/IEC Standard 17025.

Check Stock