ReviewsAntenna Balun Kit

MFJ-941E MFJ941E MFJ Enterprises Original HF Antenna Tuner with Mini Cross Meter 300 Watts

The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off....
MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets....
An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet....

Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).

Check Stock

MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner

Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).

Check Stock

CESS F-Type Balun 300-75 ohm TV Connector Antenna Matching Transformer - F 300/75 ohm Plug (2 Pack)

FM Antenna Matching Transformer 300 to 75 ohm / 75 To 300 ohm..
Quick Connect “F” Matching Transformer..
Use to Convert the 300 ohm Twin Lead Wire to a 75 ohm F-type Connector..

Check Stock

Shakespeare 5420-XT Galaxy Little Giant AM/FM Antenna , White , 4 foot

Very high quality FM Loop antenna. Designed for installation at your home (outdoors or attic), office or on an RV.
Heavy duty construction features very high quality tubing, stand-offs, integrated balun and attaching hardware.
Unlike competitors - this model is a larger 21.5" diameter.
Provides great improvements in FM reception of analog and digital signals versus indoor dipole or whip antennas.
No additional parts needed - attach your 75 ohm coax (instructions enclosed, including recommended grounding and safety details).

Check Stock

FM Loop Antenna Outdoor, Attic-mount and RV FM Antenna

Very high quality FM Loop antenna. Designed for installation at your home (outdoors or attic), office or on an RV.
Heavy duty construction features very high quality tubing, stand-offs, integrated balun and attaching hardware.
Unlike competitors – this model is a larger 21.5″ diameter.
Provides great improvements in FM reception of analog and digital signals versus indoor dipole or whip antennas.
No additional parts needed – attach your 75 ohm coax (instructions enclosed, including recommended grounding and safety details).

Check Stock

Field Expedient SDR: Introduction to Software Defined Radio (black and white version)

...improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz.
v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna (sold separately, product ID B08HGSYB7R or B00R09WHT6).
Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience (sold separately, product ID B076CYK8XZ).
Your purchase includes a NESDR SMArt v5 RTL-SDR, a magnetic antenna base with a 2m (6.5′) RG-58 feed cable, and 3 different antenna masts for UHF and VHF operation, including a variable-frequency telescopic antenna.
Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty and product support through our support portal at https//support.nooelec.com.
Full datasheet available: https://www.nooelec.com/datasheets/100700.

Check Stock

1:1 Mini Balun, Consumer Electronics with Stable Performance for HF Shortwave Antenna for Outdoor QRP Station and Furniture

【High Quality】The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
【Feature】The withstand power of the 1:1 mini balun is 100W SSB, with small size and easy to disassemble, carry and store, can bring you more convenient..
【Application】The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories..
【Product Parameter】The QRP mini balun size is approximately 91 x 36 x 26mm / 3.6 x 1.4 x 1in (including terminals), and the housing size is approximately 61 x 36 x 26mm / 2.4 x 1.4 x 1 inch..
【Quality Assurance】This video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..

Check Stock

Mini Balun Consumer Electronics Suitable for HF Shortwave Antenna for Outdoor QRP Station and Furniture (1:9)

CHARACTERISTIC: The withstand power of the mini balun is 100W SSB, smoothly operation and good performance, with small size and easy to disassemble, carry and store..
PRACTICAL: The QRP mini balun is a bidirectional balanced to unbalanced converter, very practical, can be used for unbalanced output of sound reinforcement level audio equipment, etc..
HIGH QUALITY: The shell of the mini balun is made of hard plastic material, strong and durable, not easy to damage, has good performance and a long service life..
WIDE USE: The balun has great workmanship, can perfect replacement for the old one, has a wide range use, suitable for outdoor setting and QRP use, very good electronic accessories. For long‑term outdoor use, the upper and lower covers of the shell must be bonded and sealed with silica gel..
QUALITY ASSURANCE: The video balun is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..

Check Stock

Electrodepot 433 MHz Unity Gain Omni, 6 Inches Antenna with Magnetic Base and Male SMA Connector Impedance 50 Ohms

Digi-Code 5166-03 Radio Receiver Remote Antenna Mounting Kit With 15' Coaxial Cable With F-Connectors, Antenna And Antenna Mounting Bracket. Ideal for use with radio receivers that have the F-connector type antenna typically used on gate openers when a remote antenna is needed to improve remote control signal reception and range..
Product Description: Remote Antenna Mounting Kit Ideal For Commercial And Gate Radio Receivers The Digi-Code 5166-03 also known as the DC-5166-03 remote antenna mounting kit is ideal for use with F-connector versions of gate radio receivers to improve signal reception and remote control range. This remote antenna kit allows the antenna to be located in more desirable location to increase the operating range especially with gate openers that use a metal cover, which tends to block the signal from.
Product Features: Works with all brands of radio receivers that use a standard F-connector type antenna. 15 feet commercial grade coaxial cable F-connector and rubber boot on each end 5 inch long by 2 inch L bracket with 2 mounting screw holes F-connector barrel connector on L bracket 10 inch whip type antenna with F-connector One-Year manufactures warranty.

Check Stock

Impedance Matching Transformer Ancable 10-Pack Indoor 75 Ohm to 300 Ohm UHF/VHF FM Matching Transformer Adapter with F Female Jack for Antenna and Coax Cable on TV Receiver Radio Tuner

Converts transform 75 ohm coaxial connector cable wire to 300 ohm twin lead.(or vice-versa).
With this adapter, you can make your own homemade antenna..
Supports bandwidth 5-900MHz frequency HD/TV/UHF/VHF/FM..
Package include: 10PCS balun transformer.
100% GUARANTEE, all Ancable products come with 12 months warranty, you are protected with our 100% No Questions Asked Guarantee for either a....

Check Stock