ReviewsAnti Rattle Hitch Device 2

ARKSEN Waterproof Roof Cargo Bag for Truck SUV Vans with/Without Rack - Include Net, Heavy Duty Stainless Steel Hitch Tightener, Anti-Rattle Stabilizer, 16Ft Straps

  • [A QUIET RIDE] The anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc..
  • [TIE DOWN STRAPS] The tie down straps are a perfect fit for vehicles of various sizes. At 16 feet, you're working with the right length to efficiently tie down large or small equipment..
  • [SECURE YOUR ITEMS] Crafted with extra thick 5mm bungee webbing, the 3' x 5' cargo net holds strong under the harshest conditions..
  • [USEFUL TRAVEL ACCESSORIES] Outfit your luggage rack for any trip with this useful accessory set, which includes a cargo bag, net, heavy duty stainless steel hitch tightener, an anti-rattle stabilizer and 16 foot straps..
  • [HOLD IT ALL] The cargo bag measures 58"(L) x 20"(W) x 19-1/2"(H), allowing it to easily fit in most luggage racks. It is made from heavy duty, abrasion-resistant vinyl..
Check Stock

Rage Powersports Black Widow AMC-600-2 Aluminum Double Motorcycle Carrier

  • Durable, hitch-mounted motorcycle carrier for use with up to 2 dirt bikes and motorcycles.
  • comes with self-storing ramp that can be attached to carrier during transport.
  • ramp measures 3″ 9.5″ L x 5.625″ W.
  • individual bikes must weigh less than 400 lbs.
  • Works with 2″ Class III or IV hitch receivers.
  • Ramp installs either side for bilateral roll-on, roll-off action.
  • High-strength, lightweight aluminum construction.
Check Stock

CURT 45955 Rebellion XD Adjustable Cushion Hitch with Dual Ball 2-1/2-Inch Receiver 2 2-5/16-In Balls 20,000 lbs 8-in Drop

  • INCREASED COMFORT. This cushion hitch ball mount is engineered with ShockDrop technology, featuring a cushioned isolator that helps deter jerking, jarring, bumps, vibrations, rattling and noise for a more comfortable ride while towing.
  • IMPROVED CONTROL. The dynamic, adaptive isolator of this cushion ball mount helps improve driver control by reducing jerking and jarring and managing sudden braking. It does this without any need for an anti-rattle hitch or anti-rattle shim.
  • VIRTUALLY NO MAINTENANCE. Unlike other torsion hitch and cushion hitch ball mounts, the Rebellion XD does not have an airbag or bearings. This makes the unit very easy to use and virtually maintenance-free.
  • HIGH-STRENGTH. For dependable towing strength, the Rebellion XD shock-absorbing hitch is constructed from cast steel and fully tested for 20,000 lbs. gross trailer weight for the 2-5/16-inch ball and 10,000 lbs for the 2-inch ball (limited to lowest-rated towing component).
  • EASILY ADJUSTABLE. This cushion hitch ball mount is equipped with a 2-1/2-inch shank to fit a standard 2-1/2-inch hitch receiver. The dual trailer ball can be dropped down for level towing (8-inch max drop.
Check Stock

CURT 45982 Rebellion XD Adjustable Cushion Hitch with Dual Ball, 2-Inch Receiver, 2, 2-5/16-In Balls, 15,000 lbs, 6-in Drop

  • INCREASED COMFORT. This cushion hitch ball mount is engineered with ShockDrop technology, featuring a cushioned isolator that helps deter jerking, jarring, bumps, vibrations, rattling and noise for a more comfortable ride while towing.
  • IMPROVED CONTROL. The dynamic, adaptive isolator of this cushion ball mount helps improve driver control by reducing the tendency for trailer sway and managing sudden braking. It does this without any need for an anti-rattle hitch or anti-rattle shim.
  • VIRTUALLY NO MAINTENANCE. Unlike other torsion hitch and cushion hitch ball mounts, the Rebellion XD does not have an airbag or bearings. This makes the unit very easy to use, lightweight and virtually maintenance-free.
  • HIGH-STRENGTH. For dependable towing strength, the Rebellion XD shock-absorbing hitch is constructed from cast steel . The 2-inch ball is rated for 10,000 pounds, and the 2-5/16-inch for 15,000 (limited to lowest-rated towing component).
  • EASILY ADJUSTABLE. This cushion hitch ball mount is equipped with a 2-inch shank to fit a standard 2-inch hitch receiver. The dual ball can be adjusted up or down for level towing (6-inch max drop, no rise).
Check Stock

ALTBET Electric Wheelchair Lift Battery Cable Wiring Harness 22 feet Fit for Harmar Lift

  • Easily carry scooters and wheelchairs behind any car or truck with a Class III or IV 2" hitch receiver.
  • Folds upright against vehicle when not in use to make driving and parking easier.
  • Includes an anti-rattle device, 5/8" hitch pin, exclusive ergonomically designed T-handle spring pull pin and 10 tie-down points for maximum security.
  • Manufactured from durable, powder-coated steel with a 500 lb. weight capacity.
  • Platform measures 48" L x 27-3/4" W, loading ramp measures 42" L x 27-1/2" W.
Check Stock

Softride Quiet Ride Locking Tightening Hitch Pin Anti-Rattle for Receiver Hitches Bike Racks or Boat Trailers Silence the clanking noise that occurs while towing 25219

  • Compatible with hitch receivers, hollow shank ball mounts, and multiple brands of hitch mounted bike racks, including Thule, Yakima, Saris, Kuat,....
  • Eliminate the annoying rattle and vibration when towing by using this versatile anti rattle anti theft accessory, compatible across brands. Anti....
  • Perfect for use with a car, van, truck, RV, tow vehicle, SUV, ATV, bicycle rack, camper, fifth wheel, boat trailers, cargo trailer, gooseneck and....
  • Kit includes: heavy duty solid stainless steel threaded hitch pin, lock washer, nut, rugged nut holder and fit adjuster.
  • Easy installation – hand tighten the pin, THEN attach lock, THEN wrench tighten. Install with hitch classes 1, 2, 3, and 4 (i. ii. Iii. Iv), on 2”....
Check Stock

Rage Powersports Silver Spring SC500-AF Folding Aluminum Scooter and Wheelchair Carrier with Ramp

  • Carry scooters and wheelchairs behind any vehicle with a Class III or IV 2” hitch receiver.
  • Folds upright against vehicle when not in use with four tie-down points for maximum security.
  • Includes a three-position loading ramp, anti-rattle device, 5/8" hitch pin, and a T-handle spring pull pin.
  • Manufactured from aluminum and powder-coated steel with a 500 lb. weight capacity.
Check Stock

CURT 45949 Rebellion XD Adjustable Cushion Hitch Ball Mount 2-Inch Receiver, 15,000 lbs, 6-Inch Drop

  • INCREASED COMFORT. This cushion hitch ball mount is engineered with ShockDrop technology, featuring a cushioned isolator that helps deter jerking, jarring, bumps, vibrations, rattling and noise for a more comfortable ride while towing.
  • IMPROVED CONTROL. The dynamic, adaptive isolator of this cushion ball mount helps improve driver control by reducing jerking and jarring and managing sudden braking. It does this without any need for an anti-rattle hitch or anti-rattle shim.
  • VIRTUALLY NO MAINTENANCE. Unlike other torsion hitch and cushion hitch ball mounts, the Rebellion XD does not have an airbag or bearings. This makes the unit very easy to use, lightweight and virtually maintenance-free.
  • HIGH-STRENGTH. For dependable towing strength, the Rebellion XD shock-absorbing hitch is constructed from cast steel and fully tested for 15,000 lbs. gross trailer weight and 1,500 tongue weight (limited to lowest-rated towing component).
  • EASILY ADJUSTABLE. This cushion hitch ball mount is equipped with a 2-inch shank and has a 1-1/4-inch ball hole. The trailer ball platform can be adjusted up or down for level towing (6-inch max drop, no rise).
Check Stock

Black Widow MCC-500 Steel Motorcycle Carrier

  • Durable, hitch-mounted motorcycle carrier for use with dirt bikes and motorcycles.
  • comes with self-storing ramp that can be attached to carrier during transport.
  • Ramp installs either side for bilateral roll-on, roll-off action.
  • Includes a 5/8" hitch pin and anti-rattle device to prevent tilt and wobble.
  • Durable, powder-coated steel construction.
Check Stock

MYCAN Hitch Tightener Anti Rattle Hitch Stabilizer for 1.25 and 2 Hitches Locking 2 inch Receiver Trailer 304 Stainless Steel clamp Reduce Movement from Trailer Hitch Cargo Carrier Bike Rack

  • The plate of the hitch tightener is constructed from powder-coated steel. U bolt, flat washer, and lock washer of this locking hitch tightener were....
  • Hitch Stabilizer Universal Fit, compatible with almost all hitch brands and hitch classes I, II, III, and IV (1, 2, 3, and 4), as long as your....
  • The Anti-rattle hitch tightener is Widely Use: Ideal for cargo carriers, hitch receiver, trailer ball mounts, shackle hitch, tow hook, bike racks,....
  • This Hitch stabilizer is easy to install, lock the receiver tube by U-bolt and plate, put on flat washers, spring washers, and fasten with nuts.
  • MYCAN Hitch Stabilizer provides Quiet & Stable Experience, prevent and eliminate unwanted hitch movement, wobble, rattle, rocking, and noises, ensure....
Check Stock

Qualward Hitch Tightener Anti-Rattle Clamp, Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches 304 Stainless Steel Towing Hitch Mounts,Anti-Rust Double Coating Protective

  • Eliminates Hitch Wobble & Rattle Noise: Anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc. Enjoy your quiet towing experience..
  • Universal Compatibility: Great ideal for hitches on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch)..
  • Upgraded Material: Made from solid steel, it is a pretty good quality tightener with upgraded extra-thick U-bolt and plate. It is designed to reduce noise and keep things locked tight for however far you have to travel even in tough weather conditions. You can expect this to be really tough right out of the gate..
  • Package including: A heavy duty 304 stainless steel U-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure..
  • Easy Installation: First and foremost, you are going to need the following tools: ¾” socket or wrench, U-bolt, tightener plate, washers, lock rings, and nuts. Then，drop the U-Bolt over the stinger and position the tightener plate onto the U-Bolt. Next, pla....
Check Stock