ReviewsAnti corrosion Steel Pipe

Sinber 36\ 16 Gauge Single Bowl 304 Stainless Steel Workstation Farmhouse Apron Kitchen Sink With Accessories

...ced table can be used for cutting pork chops and steaks, etc., gooseneck 360 degree rotation Faucet is convenient to use. It also has 2 kitchen knife holders..
* Stainless Steel Sink Set: Made of high-quality sturdy 304 stainless steel, super easy to clean and keep hygienic. With a polished surface, with better anti-corrosion effect and long-lasting effect, and look shiny. The spacious drainer provides you with enough space to dry everything from cutlery, plates to pots and pans..
* Free Accessories- Functional accessories include：Hot and cold salon head×1, sink layer×1, middle shelf×1, bottom shelf×1, leg pipe×8, drain pipe×1, drain pipe×1, adjusting foot×4..

Check Stock

AnEssOil Commercial Grease Trap Stainless Steel Interceptor 0.25 Ton/h (45x25x25cm)

【Overall dimensions】35x20x18cm/45x25x25cm/60x30x30cm.
Weight: 5.5 lb (2.5 kg) / 10.1lb(4.6 kg) / 16lb/(7.3 kg) ；Material: Heavy Duty 0.6mm Thickness Stainless Steel.
【High quality】Made of heavy duty 0.6mm thickness stainless steel. Anti-rust, anti-corrosion, non-deformation long service life. Flowing speed up to 0.15 / 0.25 /0.5 Ton/ H.
【Easy to clean】Baffles are removable,Locking device at both side prevent side leakage of sewage. Faucet switch makes it easier to control the outlet of sewage. Lifting handle at the top allows easy transportation..
【Easy to install】 Our Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain. We recommend solvent weld pipe is used for a secure fit. Also make sure the trap is on the flat floor..
【100% Refund guarantee】We guarantee 3 year warranty, free parts exchanged, you can be sure to buy. If you are not completely satisfied with our products, we will give you a full refund..

Check Stock

1/2inch Rigid Pipe Strap Clamp, Two Hole Strap,U Bracket Tube Clip, Stainless Steel Heavy Duty Pipe Fasten Holder, 50Pcs (20mm)

This Clamps accommodates 20mm (1/2") pipe and has 2 holes to secure it in place. Suitable for holding various pipes or rods like PVC. The screw hole diameter is 4mm (0.15")..
Made of 304 stainless steel, with 0.6mm rigid thickness, the pipe clamps are highly resistant to corrosion and rust, strong, durable and sturdy..
Use in pipe fixing on various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems..
These u shape clamps are strong enough to hold your pipe or rod securely. Reinforced steel for extra strength..
Only need to cooperate with screws can be installed, convenient and fast, resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..

Check Stock

SYKRSS 2 inch Inlet Muffler Exhaust 2' to 3' Exhaust Muffler Resonator Tailpipe Tips 14.8' Length Tail Muffler with Blue Burnt Exhaust Tip Fit For Car Truck

Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.8 inch. NOTE : Universal muffler fit 2" OD pipe, but Not fit 2" ID pipe. Please measure the OD of your exhaust pipe before ordering..
High Quality Material: SYKRSS exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made of two layers of stainless steel and premium sound-absorbing cotton, which help reduce vibration and absorb sound, durable and Anti-corrosive, never Rusty. Perfectly decorate the exhaust pipe of your car..
2 in 1 Design: This is a 2 inch muffler with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe. No instruction is included. Professional installation is highly recommended..
SYKRSS value your shopping experience, If you encounter any problems in installing the 2" muffler, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..

Check Stock

Beduan Pneumatic Tubing Pipe 5/16

Wide range for working temperature and pressure.
Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
Tubing Pipe Features: Excellent flexibility, Small bending radius.
Excellent chemical properties, Minimal pressure loss.
PU Tubing Pipe Material: PU( Poly Urethane ).
PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).

Check Stock

Motorcycle Exhaust Pipe Slip On Exhaust Middle Link Pipe Adapter Connector for Kawasaki Z250 Ninja 250 13-16

Professional customization: This is a middle link for ninja 250. The exhaust muffler pipe is compatible for Kawasaki Z250 Ninja 250 300 2013-2016..
Powerful functions: Exhaust pipe makes your motorcycle roar with outstanding sound and helps to obtain maximum output, increase the exhaust performance..
Beautiful decoration: A significant part for connecting with your tail pipe, makes your motorcycle to be more aggressive. The slip on exhaust link pipe decorates your car and make your car particular and unique..
Quality material: Premium stainless steel construction with added coating process, high temperature resistant and anti-corrosion, firm ,solid and durable..
Easy installation: Precision cast to make sure its easy installation and perfect fitment, direct replacement, stable performance, high reliability..

Check Stock

MOSTPLUS 4 inch Inlet Exhaust Tip 4 Inlet 8 Outlet 15 Length Truck Diesel Exhaust Tip Black Stainless Steel Tailpipe Tip

★FITMENT: Inside diameter inlet---4 Inch, Outside diameter outlet---8 Inch, Overall length---15 Inch.
★MATERIAL: High qualified stainless steel material,durable and anti-corrosive. It will protect your original pipe from the sun and rain, avoid....
★NOTE : It will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe..
★INSTALLATION - No weld and drill needed.Just fix the screw to the appropriate location of tailpipe by wrench..
★Please check your car information before purchase..

Check Stock

ZWLI Single Bowl Stainless Steel 304 Sink Free Standing Commercial Restaurant Kitchen Sink Set w/ Faucet Utility Washing Hand Basin for Indoor Outdoor,19.7in Wide

...nvenient for daily washing, double bowls can be placed independently and easy to clean. Can be cleaned with neutral soap to ensure anti-rust gloss life.
【Premium Quality】Our double utility sink is made of sturdy 304 stainless steel, super easy to clean and keep hygienic, with a polished surface, with better anti-corrosion effect and long-lasting effect, and it will definitely look shiny like a kitchen! The spacious drainer provides you with enough space to dry everything from cutlery, plates to pots and pans..
【Wide Applications】Package :1X kitchen sink,1X hot and cold faucet,2X angle valve,2X water inlet pipe,1X bracket,2X all steel drain 1X connecting pipe,1X drain pipe,A pair of cloth gloves,1X raw material tape .It is very suitable for washing and cleaning food, fruits and vegetables, any kitchen, bar, restaurant, dessert shop, clean room, cafeteria, garage or any other commercial place by hand..

Check Stock

Two Little Fishies ATL5410W 6-Piece Plastic Hose Clamp Set, 3/4-Inch

...th totally 40 pcs hose clamps with 7 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden.
DURABLE 304 STAINLESS STEEL –The hose clips are made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
NICE ASSORTMENT SIZES – The stainless clamps include 7 different diameters steel hose clamps to adapt to different hoses: 6-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm, 18-32mm, 21-38mm. The Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches.
EASY TO INSTALLL AND REUSABLE – The hose clamp designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine,....

Check Stock

KIMISS Silver Stainless Steel Motorcycle Exhaust Middle Pipe Link Connect Adapter for Honda MSX125 2013-2015

FITMENT: Especially Designed for Yamaha YZF-R25/YZF-R3 2015 2016 2017 2018 Exhaust Front Pipe.
FEATURE: : Stylish design, becoming a striking decoration in your motorcycle.
PREMIUM MATERIAL : Made of high strength stainless steel, anti-corrosion and durable.
FUNCTION : It can connect with 51mm muffler pipe and won't rust exposed to high temperature or rain.
INSTALLATION : Precise design and easy installation.

Check Stock

Hose Clamp, 10 Pieces Stainless Steel Adjustable 16-25mm Range Worm Gear Hose Clamp, Fuel Line Clamp for Plumbing, Automotive and Mechanical Applications

PACKAGE - 10 piece 5/8 to 1 inches(16-25mm) hose clamps.
MATERIAL - 304 stainless steel, more corrosion resistance than 203 stainless steel (not easy to rust).
HIGH QUALITY- The whole hose clamp (including the band, housing and screw) are all made of premium heavy duty stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.
WIDELY USED- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor.
ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them work last for long.

Check Stock