ReviewsAnti seize

Aluminum Anti Seize Lubricant | Aluminum Grease | Brake Grease Pins & Cams | Spark Plugs | Thread Compound | Bolt & Screw Lube | High Temp | Automotive | Never Seize Paste | 8 Oz Brushtop | Bustapart

High Temp Aluminum Anti-seize Grease For Threaded Fittings Bolts & Nuts.
Reduces Galling, Seizing, Welding & Carbon Fusion Providing A Dry-Film of Protective Solids On Threads.
Reducing Total Amount of Torque Needed For Easier Disassembly.
As BustApart Aluminum Anti-Seize Is Free Of Copper, It Can Be Safely Used On Stainless Steel Or Other Sensitive Alloys.
Excellent Brake Lube Antiseize For Brake Pins and Brake Cam Assemblies Subject To Extreme Conditions Of Water, Steam, Chemicals, Rust, & Corrosion..
Protects: Nuts, Bolts, Screws, Sprockets, Chains, Spark Plugs, Gaskets, Valve Assemblies, Splines, Gears & Conveyors. Do Not Use On Oxygen Systems.

BustApart Copper Aerosol Spray is an Anti-Seize Lubricant Formulated To Withstand High Temperatures And Extreme Pressures.
Contains Rust And Corrosion Inhibitors To Assure Long Life Of Connectors.
Use: All Threaded Fittings, Bolts, Axle Shafts, Valves, Gaskets, Flanges, “O” Rings, Bushings, Bearings, Rollers And Conveyors, Gears, Transmission Boxes, Chains And Drives, Electric Motors, Compressors, Hoists, Turbines And Winches, Furnaces, Burner Assemblies, Regulators, Pumps, Valve Stems, Manifold And Stud Assemblies, Fuel Injectors, Pre-Combustion Chambers, Turbo-Charger Fittings, Guides And Thread Tubing, Keyways And Spark Plugs, Torque Rod Pins And Tubes,.
Copper Prevents Seizing, Galling And Premature Wear by Sealing Out Moisture, Gases And Corrosive Fluids From Threaded Connections.
Spray Aerosol is designed to make application quicker and storage longer lasting than conventional anti-seize applicators.

Anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exists.

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions....
Typical applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine, bolts, thermostat housing, fuel filter....

A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist.
Typical applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine, bolts, thermostat housing, fuel filter fittings, oxygen sensors and battery cable connections.

MRO Anti seize solution 2500 is composed of grease, calcium and graphite for heavy duty applications. It is the proffered choice for chemical plants and refineries..
Solution 2500 can help reduce friction between two metal contact points for stainless steel and other alloys..
Thus eliminating the galling/seizing or locking up effect most commonly seen with stainless steel fasteners that are under extreme pressure..
This solution can also extend the life of a fastener and ease assembly and disassembly of fasteners..
Solution 2500 is temperature resistant up to 2500°F. Meets MIL-A-907-E..

High Temp Copper Anti-seize Grease For Threaded Fittings Bolts & Nuts.
Reduces Galling, Seizing, Welding & Carbon Fusion Providing A Dry-Film of Protective Solids On Threads.
Reducing Total Amount of Torque Needed For Easier Disassembly.
Copper Fortified Grease Compound Unaffected By Severe Temperatures, Vibration, Expansion And Contraction.
Excellent Brake Lube Antiseize For Brake Pins and Brake Cam Assemblies Subject To Extreme Conditions: Water, Steam, Chemicals, Extreme Pressure, Rust & Corrosion.
Protects: Nuts, Bolts, Screws, Sprockets, Chains, Spark Plugs, Gaskets, Valve Assemblies, Splines, Gears & Conveyors.

American Bureau of Shipping ( ABS) Approved, Contains our propriety semi synthetic grease base, Formulated with over twice the corrosion inhibitors of a normal anti seize compound.
Highly resistant to both fresh and salt water exposure, Outstanding water wash off and spray resistance, Provides superior extreme pressure lubrication.
Protects against seizing and galling of threads, Can be applied to wet or dry parts, High Density fillers cushions parts from shock loads.

Designed for Heavily Loaded threaded assemblies, Works where other compounds fail, Protects against seizing and galling.
Excellent for Stainless Steel applications, Long-term protection against rust and corrosion, Reduces friction on all metal surfaces.
Protects load bearing surfaces during critical wear-in.
Mol-Lit Anti-seize compound delivers maximum performance for highly loaded fasteners subjected to high shock loads Recommended for threads, pipes, valves, and equipment carrying ethylene, acetylene.

Prevents harmful attacks in corrosive environments, High resistance to acids and caustic environments, Reduces assembly friction and aids in disassembly, Resists seizing, galling, and cold welding.
Highly water resistant, High Heat Resistance, on-Staining, Easy Clean up, NSF Registered, H-1, Reg# 135303 ,FDA Compliant 21CFR 1783570.
Pure, tasteless, non-toxic and white color, High Solids content ensures peak performance, Applications where metal fillers are not desired.
Hi-Temp Food Grade Anti-Seize does not separate. It is non-dripping, non-hardening and highly resistant to water and repeated washings..