ReviewsAnti sway Bars

Shocker Air Equalizer & Weight Distribution Hitch with Sway Control Arm Kit, Fits 2" Hitch 5" Rise 4" Drop

  • Smoother Safer Towing: Add instant air ride towing to your pickup & camper trailer with a equalizer, weight-distribution hitch & sway control kit. Absorbs Road Shock: Air equalizer absorbs the road shock & cushions the ride when towing a camper with a weight-distribution hitch. Weight Distribution Hitch: Evenly distributes the weight over the axles of tow your vehicle and trailer to add stability and control..
  • Eliminates Trailer Sway: Dual friction sway bars stiffen the connection between truck & trailer. Adjust & fine-tune your towing experience. Help reduce any sway from wind or road conditions. For 2-5/16" Couplers & Made Fits Pickup Trucks Only: The Air Equalizer is designed for pulling with a Pickup Truck ? Comes with 2-5/16" hitch ball. (2" ball not included) Air Ride Technology: Built in air bag + 4 bump cushions direct the road shock through the air spring..
  • Adjustable & Heavy-Duty: 12,000 lbs towing & 1,200 lbs tongue weight capacity plus 7" or 9" of Adjustment (5" of rise to 2" drop or choose 5" rise to 4" drop). Fine tune for your towing weight. Just add air for heavier loads. ....
Check Stock

Proforged 113-10263 Rear Sway Bar End Link

  • ...oducts that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A SWAY BAR END LINK? A sway bar end link (also known as a stabilizer bar link) is part of your vehicle’s suspension system - it connects your sway bar (or anti-roll bar) to the rest of your suspension. Tie rod style sway bar end links are built with a ball-and-socket design, just like your hip, and need to be replaced as they wears out. Bolt-and-sleeve type end links utilize bushings that wear out over time. A worn sway bar end link causes poor handling and body roll - replacing your worn sway bar end links gives a noticeable improvement in steering response, handling, and safety..
Check Stock

Proforged 113-10342 Front Left Sway Bar End Link

  • ...oducts that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A SWAY BAR END LINK? A sway bar end link (also known as a stabilizer bar link) is part of your vehicle’s suspension system - it connects your sway bar (or anti-roll bar) to the rest of your suspension. Tie rod style sway bar end links are built with a ball-and-socket design, just like your hip, and need to be replaced as they wears out. Bolt-and-sleeve type end links utilize bushings that wear out over time. A worn sway bar end link causes poor handling and body roll - replacing your worn sway bar end links gives a noticeable improvement in steering response, handling, and safety..
Check Stock

Husky 32215 Center Line TS with Spring Bars - 400 lb. to 600 lb. Tongue Weight Capacity (2\ Ball)

  • Combines weight distribution and sway control in a single unit - no need for additional hardware, outstanding performance - drive it and see.
  • Handle can be used to hook up and remove bars, universal EZ Adjust frame brackets for easy installation and adjustment.
  • None of the noise problems other WD/sway products have - it's quiet, significantly lighter weight than competing products.
  • Forged and hardened steel components deliver excellent long-term durability and service, hitch ball is factory pre-installed and properly torqued.
Check Stock

Husky 32217 Center Line TS with Spring Bars - 600 lb. to 800 lb. Tongue Weight Capacity (2-5/16\ Ball)

  • Combines weight distribution and sway control in a single unit - no need for additional hardware, outstanding performance - drive it and see.
  • Handle can be used to hook up and remove bars, universal EZ Adjust frame brackets for easy installation and adjustment.
  • None of the noise problems other WD/sway products have - it's quiet, significantly lighter weight than competing products.
  • Forged and hardened steel components deliver excellent long-term durability and service, hitch ball is factory pre-installed and properly torqued.
Check Stock

Husky 32216 Center Line TS with Spring Bars - 400 lb. to 600 lb. Tongue Weight Capacity (2-5/16' Ball)

  • Combines weight distribution and sway control in a single unit - no need for additional hardware, outstanding performance - drive it and see.
  • Handle can be used to hook up and remove bars, universal EZ Adjust frame brackets for easy installation and adjustment.
  • None of the noise problems other WD/sway products have - it's quiet, significantly lighter weight than competing products.
  • Forged and hardened steel components deliver excellent long-term durability and service, hitch ball is factory pre-installed and properly torqued.
Check Stock

Husky 32218 Center Line TS with Spring Bars - 800 lb. to 1,200 lb. Tongue Weight Capacity (2-5/16\ Ball)

  • Combines weight distribution and sway control in a single unit - no need for additional hardware, outstanding performance - drive it and see.
  • Handle can be used to hook up and remove bars, universal EZ Adjust frame brackets for easy installation and adjustment.
  • None of the noise problems other WD/sway products have - it's quiet, significantly lighter weight than competing products.
  • Forged and hardened steel components deliver excellent long-term durability and service, hitch ball is factory pre-installed and properly torqued.
Check Stock

Detroit Axle - 4WD Front Struts w/ Coil Spring + Sway Bars + Rear Shocks Replacement for 2005-2008 Ford F-150 Lincoln Mark LT - 6pc set

  • Replacement for 2005-2008 Ford F-150 (Built After 11/30/04) - [2006-2008 Lincoln Mark LT].
  • Kit Includes: 2x Front Struts w/ Coil Spring + 2x Rear Shocks Absorbers + 2x Front Sway Bar Links.
  • Detroit Axle Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs.
Check Stock

ECCPP Sway Bar Kit for Ram 1500 for Ram 2500 for Ram 3500 for Ford Explorer for Ford Explorer Sport Trac for Ford Ranger B2300 B2500 B3000 B4000 for Mercury Mountaineer

  • FITMENT- 1994-2001 for Dodge for Ram 1500.
  • WHAT YOU GET - 2 K7275 Front Sway Bar End Link.
  • ADVANTAGE - ONE YEAR WARRANTY - Our products has undergone extreme impact, wear, and fatigue testing to help ensure quality and durability.
  • FUNCTION - Steering Sway Bars ensures that the sway bar connects the control arms on both sides of the vehicle, reducing lean and roll while cornering.
  • IMPORTANT NOTE - Please check the description or use the year,make,model in the Amazon Fitment Filter System in the top left corner to confirm the compatibility.
Check Stock

CURT 17062 Round Bar Weight Distribution Hitch with Integrated Lubrication and Sway Control, Up to 10K, 2-in Shank, 2-5/16-Inch Ball, Black

  • LEVEL TOWING. This weight distribution hitch offers a smoother ride and improved control by distributing the tongue weight of the trailer across the vehicle-trailer combination and leveling the load. It also includes a trailer sway control bar.
  • CONTINUOUS LUBRICATION. This CURT weight distribution hitch with sway control is equipped with an integrated lubrication system for smooth, quiet towing. The hitch head has two easy-access grease zerk fittings for continuous lubrication.
  • RELIABLE STRENGTH. This load-leveling hitch is constructed with a fabricated head and has 31-3/16-inch long forged steel spring bars. It is rated to tow 8,000 to 10,000 lbs. gross trailer weight and 800 to 1,000 lbs. tongue weight.
  • STANDARD FIT. To ensure maximum versatility, this stabilizer hitch comes with a highly adjustable 2-inch shank that fits virtually any industry-standard 2-inch trailer hitch receiver. It also includes a pre-torqued 2-5/16-inch trailer ball.
  • CORROSION-RESISTANT. For long-lasting resilience to the elements, this weight distribution hitch with sway control is covered in a durable carbide black powder coat finish.
Check Stock

CURT 17063 Round Bar Weight Distribution Hitch with Integrated Lubrication and Sway Control, Up to 14K, 2-In Shank, 2-5/16-Inch Ball , Black

  • LEVEL TOWING. This weight distribution hitch offers a smoother ride and improved control by distributing the tongue weight of the trailer across the vehicle-trailer combination and leveling the load. It also includes a trailer sway control bar.
  • CONTINUOUS LUBRICATION. This CURT weight distribution hitch with sway control is equipped with an integrated lubrication system for smooth, quiet towing. The hitch head has two easy-access grease zerk fittings for continuous lubrication.
  • RELIABLE STRENGTH. This load-leveling hitch is constructed with a fabricated head and has 31-3/16-inch long forged steel spring bars. It is rated to tow 10,000 to 14,000 lbs. gross trailer weight and 1,000 to 1,400 lbs. tongue weight.
  • STANDARD FIT. To ensure maximum versatility, this stabilizer hitch comes with a highly adjustable 2-inch shank that fits virtually any industry-standard 2-inch trailer hitch receiver. It also includes a pre-torqued 2-5/16-inch trailer ball.
  • CORROSION-RESISTANT. For long-lasting resilience to the elements, this weight distribution hitch with sway control is covered in a durable carbide black powder coat finish.
Check Stock