ReviewsApplication Module

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

AEDIKO 10pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging Boost Mobile Power Protection PCB Board

  • 2A 5V Lithium Battery Charging Protection Module:Output Voltage: 5V.
  • Charging Voltage: DC 4.5V-5.5V (DC 5V Recommended).
  • MCU Users: if You Accept a Small Load KEY Can be Connected to the Microcontroller about 20s to Provide a Low Level Allows the Module to Continue Working. Trigger Mode: Low Level Trigger (Ground).
  • Protection Functions: 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module.Lithium Battery Protection Function:Over-Current Protection,Over-Voltage Protection, Over-Temperature Protection, Short Circuit Protection.
  • NOTE:The First Time the Load is Connected, Output is Automatically Turned On. If the Load is Less than 50MA, the Output will be Automatically Turned Off after 30s.
  • if the Load is Greater than 50MA, the Output Will be Automatically Turned On.
  • Application:2A 5V Module Widely Used for Mobile Power, Car Charging Retrofit,Driving Recorder Power Supply and Portable Devices Such As Mobile Phones and Tablets.
Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
  • 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..
Check Stock

DWEII 2 Pack GPS+BDS Dual-Mode Module Flight Control Satellite Positioning Navigator, ATGM336H Replacement NEO-M8N NEO-6M for Arduino

  • Application areas: Car positioning in navigation.
  • Mobile phones, tablet PCs, handheld devices.
  • 2PCS ATGM336H Chip GPS+BDS Beidou dual-mode positioning navigation module.
  • The ATGM336H-5N series module is a generic term for the 9.7 * 10.1-size high-performance BDS / GNSS constellation positioning navigation module family.
  • Excellent positioning and navigation functions,support single-system positioning of BDS/GPS/GLONASS satellite navigation systems,and any combination of multi-system joint positioning,and support QZSS and SBAS systems.
Check Stock

MakerFocus Lidar Range Finder Sensor Module TF-Luna, Single-Point Micro Ranging Module 0.2 to 8m Compatible with Pixhawk, Arduino and Rasppbarry Pi with UART / I2C Communication Interface

  • English product manual: Get the link in the product guide and document. Note: TF-Luna module comes with UART and I2C interface, the default is UART, if you need to use I2C interface, please set it yourself..
  • TF-Luna: TF-Luna is a single-point ranging LiDAR, based on TOF principle. With unique optical and electrical design, it can achieve stable, accurate and highly sensitive range measurement..
  • Product Characteristics: The product is built with algorithms adapted to various application environments and adopts multiple adjustable configurations and parameters so as to offer excellent distance measurement performances in complex application fields and scenarios..
  • Extreme Cost Performance: Low-cost ranging LiDAR module, with 0.2-8m operating range. TF-Luna has a highly stable, accurate, sensitive range detection..
  • Slim Figure Yet Big Skill: The product is built with algorithms adapted to various application environments and adopts multiple adjustable configurations and parameters so as to offer excellent distance measurement performances in complex application fields and scenarios..
Check Stock

12v to 5v Converter Buck Module USB Output Power Adapter Dc Power Adapter Converter Direct Current to Direct Current Regulator Car Power Converter (1)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock

IRONWALLS 2 Packs Storefront Light 100ft, 400 Pieces 3 LED SMD5050 LED Module Light for Windows, Colorful Waterproof Window Strip Light Business Decorative Light for Advertising Sign, Store, Party

  • ...【Practical Decorative Lights】With high sealing PVC plastic shell material, the waterproof rating of RGB light strip is up to IP68 and it can work in -20-60℃, suitable for indoor & outdoor use. And each module of this waterproof LED light has self-adhesive tape backside, peel and stick, easy to use..
  • ✨【Wide Applications】 The storefront light features wide application, can be used for home garden decoration , landscape layout , party, wedding decor, stage adornment, cars, letters design, business signs and so on. These LED light around your storefront would surely attract customer attention and make your store more noticeable..
Check Stock

Dyna-Living LED Storefront Lights 400pcs 3-LED Module Light RGB with Remote Controller 5050 SMD LED Window Light 200FT Super Bright Waterproof Strip Lights for Store Decor Letter Signs

  • ... [IP68 Waterproof LED strip Lights]- LED module lights can work normally in winds, rainy days or humid environments.
  • The commercial LED window lights are made of high-quality PVC plastic, which is not due to long-term use and then turning yellow..
  • [Wide Application]- You can install these commercial LED window lights around the shop or car shop to attract the attention of customers. LED storefront lights are widely used for LED sign lights, step lights, vanity mirror hand-washing lights, cabinet lights, commercial signs, three-dimensional luminous signs or festival decor and so on..
Check Stock

Zyyini TPM 2.0 Module, 14Pin LPC TPM 2.0 Encryption Security Module 14Pin LPC Interface Remote Card for Windows 7 10, for AMD B550, for Intel B450 B460

  • Scope of Application: The 14pin security module is suitable for Win 11 motherboards. Some motherboards require a TPM module or the latest version to be plugged in to enable the TPM option.
  • Separate Processor: The TPM is a separate cryptographic processor connected to the following level board connected to the motherboard. TPM securely stores encryption keys that can be created using encryption software.
  • Convenient and Practical: Without the motherboards 14pin security module, the content on the user PC will remain encrypted and protected against unauthorized access.
  • Wide Compatible: The 14pin encryption security module supports for Win 7 64 bit, for Win 8.1 32/64 bit, for Win10 64 bit, actual performance may vary depending on your system configuration.
  • Memory Size: The standard PC architecture reserves a certain amount of memory for system use, so the actual memory size will be smaller than the specified amount. Supported states may vary by motherboard specification.
Check Stock

QuickStick Combo HUSBZB-1 by Nortek Cert ID ZC10-15090013

  • Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion.
  • Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the....
  • Compact plastic case and wires connect for easy mount..
  • Forward and Reverse status indicating LED, forward status lighting red, reverse lighting green. When the control switch is not turned on, the module....
  • Rated current 10 Amp, Operating Voltage: 10 ~ 15V DC..
Check Stock