ReviewsApplication Motor

Makita XTR01Z 18V LXT Lithium-Ion Brushless Cordless Compact Router

  • Makita built Brushless motor delivers faster and more accurate cuts in a variety of materials.
  • The electronically controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable speed control dial (10,000 to 30,000 RPM) to match the speed to the application.
  • Electronic speed control maintains constant speed under load.
  • On/off button with separate lock button helps prevent accidental startup of the tool for user and work piece protection.
Check Stock

Makita XT267T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah ,

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL motor delivers 1,090 in.Lbs. Of max torque.
  • Variable speed impact driver (0-3,400 RPM & 0-3,600 IPM) with BL motor delivers 1,500 in.Lbs. Of max torque.
Check Stock

LDEXIN 5pcs 1/4 HP AC220V-50/60Hz Round Shell Fridge Component Overload Thermal Protector Relay Starter for Refrigerator

  • ✨【Overheat Guard】This starter is an overload thermal protector for 1/4HP refrigerator.Can replace the old damaged one starter..
  • ✨【Easily Use】Is easy to install, low profile and light weight, highly reliable performanc.Idea for compressor of air-condition or other electric protection appliance..
  • ✨【Motor Protector】Designed to prevent dangerous overheating that can cause motor failure.Ideal spare parts for refrigerator..
  • ✨【Application】The thermal protection is present to turn the motor off when excessive heat is generated within the motor circuitry, halting the temperature climb before it can burn up the motor..
  • ✨【Note】This overheating generally occurs when the motor is overloaded, when a bearing seizes up, when something locks the motor shaft and prevents it from turning, or when the motor simply fails to start properly. A failure to start may be caused by faulty start windings in the motor..
Check Stock

TYC 700108 Cadillac Replacement Blower Assembly

  • OE-comparable assembly complete with motor and fan (wheel) to save installation time and cost.
  • Superior materials and sub-components provide maximum strength and durability.
  • The fan (wheel) is pre-balanced with the motor to ensure perfect fitment and performance.
  • New (not refurbished), application-specific motor ensures maximum thermal efficiency.
  • OE-comparable wiring harness, no 'pigtail' connector.
Check Stock

TYC 700089 Chevrolet/Cadillac Replacement Blower Assembly

  • OE-comparable assembly complete with motor and fan (wheel) to save installation time and cost.
  • Superior materials and sub-components provide maximum strength and durability.
  • The fan (wheel) is pre-balanced with the motor to ensure perfect fitment and performance.
  • New (not refurbished), application-specific motor ensures maximum thermal efficiency.
  • OE-comparable wiring harness, no 'pigtail' connector.
Check Stock

Makita XT269T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2, 000 RPM) with BL Brushless motor delivers 530 in pounds. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 pounds of max torque.
Check Stock

Electric Bicycle Motor Kit, 12V 250W DC High Speed Electric Bike Conversion Kit with Speed Controller, 13 Tooth Sprocket, 38 Section Chain Electric Gear Motor Kit for E-Bike, Electric Motorbike

  • 【EASY TO USE & CONTROL】This electric gear motor is easy to use and control, providing steady speed and sensitive braking and steering control. The rated power is 250W, and the rated speed is 2950 RPM, Main application is suitable for electric bicycle..
  • 【HIGH QUALITY】This electric DC motor equipped with reliable metal housing protects the internal circuit and has good heat dissipation performance to avoid thermal overload. With long life, high speed operation, high temperature resistance, high power..
  • 【PRACTICAL ELECTRIC BIKE CONVERSION KIT】This electric motor kit comes with a 38 section chain, a speed controller and a 13 tooth gear, can easily used in practicality, gear motor supports working with low noise, low current and no sparks..
  • 【WIDE APPLICATION】This dc geared motork kit is suitable for motorized bicycle, moped, mini bikes, pocket bikes and electric dirt bikes,scooters, e-bike, atv and so on..
  • 【100% QUALITY ASSURANCE】We are very confident in the quality of this electric bike motor kit, and provide warranty or refund for it. Please feel free to reach us if you have any questions about your purchase..
Check Stock

Makita XFD12Z 18V LXT Lithium-Ion Brushless Cordless 1/2 Driver-Drill Tool Only,

  • Mechanical 2-speed transmission (0-500 & 0-2,000 RPM) for a wide range of drilling and fastening applications.
  • BL Brushless motor delivers 530 in.Lbs. Of max torque.
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
Check Stock

TYC 700192 Honda Odyssey Replacement Front Blower Assembly

  • OE-comparable assembly complete with motor and fan (wheel) to save installation time and cost.
  • Superior materials and sub-components provide maximum strength and durability.
  • The fan (wheel) is pre-balanced with the motor to ensure perfect fitment and performance.
  • New (not refurbished), application-specific motor ensures maximum thermal efficiency.
  • OE-comparable wiring harness, no 'pigtail' connector.
Check Stock

AUTOTOOLHOME 6-12V Mini DC Motor High Torque Gear for Traxxas R/C and Power Wheels PCB DIY Electric Drill

  • ...ble, and compatible. We promise we will tested ever motor before shipment..
  • 【Specification:】 Shaft Diameter: 7mm ； Shaft Length: 14.5mm ； Working Voltage: AC 110V ； Speed: 30-36RPM ； Frequency: ~50/60Hz ； Power: 6W ； Capacitor: 0.56uF ； Tourque: ≤2.5Kgf.cm； Rotation: CW/CCW (controllable)；.
  • 【Application:】An good motor for household, hand-made, school project, model, light, AD and anything you want. Mainly used in instrument, automation, gluing machine, stage lamps and advertising display equipment, curtain automatic control, automatic voltage regulator, electric image, etc..
  • 【Attention:】 1.When the motor is running, it will hot, please do not touch it, It is normal that the motor becomes hot during motor working (the surface temperature may reach to 80-90℃ ). It does not affect the use, please do not worry. 2.Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us. Welcome to bulk purchase and OEM orders!.
  • 【Package:】1 x Synchronous Motor, 1 x Capacitor.
Check Stock

Makita XPT02Z 18V LXT Hybrid Brushless Impact Driver

  • Hybrid 4-function tool with impact, hammer, driver and drill all in one.
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Hammer Driver-Drill mode features variable 2-speed operation (0-700 & 0-2, 700 RPM) (0-8, 400 & 0-32, 400 BPM).
Check Stock