ReviewsAr 1pistol Buffer Tube

AR-PRO 13 x 5.00-6'' Heavy Duty Replacement Inner Tube with TR-13 Straight Valve Stem (4-Pack) - Compatible with Wheelbarrows, Razor Quad, Dirt Bike, ATV, Mowers, Hand Trucks and More

  • THE PERFECT REPLACeMENTS: AR-PRO offers the perfect replacement inner tube for 13 x 5.00 to 6'' (13'' Outside Diameter) tires of hand trucks, lawn mowers, yard trailers, wheelbarrows, and Razor Dirt Quad versions 1 to 18, replacing Razor tube Part # W25143060078 (The inner tubes also fit 5.30 6 and 4.50 6 size tires)..
  • PREMIUM QUALITY: Our inner tubes THE PERFECT REPLACEMENTS: AR-PRO offers the perfect replacement inner tube for 13 x 5.00-6'' (13'' Outside Diameter) tires of hand trucks, lawn mowers, yard trailers, wheelbarrows, and Razor Dirt Quad versions 1-18 (The inner tubes also fit 5.30-6 and 4.50-6 size tires) The inner tubes are made of premium, heavy duty rubber, yet for less cost from the OEM. They last longer and are good to use for all seasons..
  • PROPER FIT: The inner tubes are approved by the mechanic to ensure the quality meets or exceeds the OEM ones..
  • FIT THE FOLLOWING: versions 1-18 of Razor Dirt Quad, replacement Razor tube Part W 25143060078, 5, 7 and 8 HP engines 130200, 130900, 170700, 190700, 170499 &190400 series.
  • IMPORTANT NOTE: This replacement kit is an aftermarket product produced by CalPalmy (TM). It meets or exceeds the performance of OEM replacements (based on in-house testing). We do not have any affiliation with o....
Check Stock

ALEKO PCBAC1400 Circuit Control Board For Gate Openers AC1400 AC2000 AR1450 AR2050

  • Our nylon gear racks are compatible with any ALEKO brand AR series rack driven gate openers.
  • Made for ALEKO brand gate openers, but compatible with most other rack driven openers.
  • Made of fiberglass reinforced nylon surrounding a steel tube.
  • Nylon gear racks operate more quietly than steel racks, and are rustproof.
  • Includes (4) 3.3 foot long gear racks for a total of 13 feet, and all needed fixings.
Check Stock

Xduoo TA-10R USB DSD DAC 12AU7 Tube Headphone Amplifier AK4490 XMOS Decoder AUX Input USB Digital Home Aduio DAC Amplifier(Black)

  • 【Tube + Transistor Hybrid Amplifier】XDUOO MT-602 adopts 6J1 tube for pre-amp and transistors for class-A buffer. The front tube amplifier and rear transistor combine the advantages of two amplifier circuits to achieve the ideal sound effect and make you immersed in the happy atmosphere of music.
  • 【Compact Portable Headphone Amplifier】As it adopts transistors for buffer, strong output power up tp 1300mW, can easily drive many kind of headphones. Moreover, designed with palm size(12*7.8*4cm), it’s easy to carry everywhere for real-time HiFi music experience.
  • 【Professional Capacitance】Apart from adopting the special enthusiast Japanese ELNA capacitance as the coupling capacitance to present have transparent and sweet sound, it also adopts the special enthusiast Japanese RUBYCON capacitance as the main filter capacitance to reach smooth and warm sound, and splendid high frequency..
  • 【Volume Control, AUX In/Out】This model is designed with one line output, through the tube, and controlled by volume. lt can be used as the Pre-amplifier of all kinds of audio amplifier or active speaker, and improve the sound quality of audio amplifier or active speaker. If you have any questions while using, please feel free to contact us..
Check Stock

Bell 16-Inch Universal Inner Tube, Width Fit Range 1.75-Inch to 2.25-Inch, Black

  • 28" 700x20-25C REPLACEMENT ROAD BIKE INNER TUBES - These inner tubes are universal replacements for 700c (622) road bikes with 28-inch tires that have widths between 20mm to 25mm. High-quality and durable, these inner tubes are must-haves for all road bike owners..
  • REINFORCED BRASS 60MM PRESTA VALVES - Presta valves usually are longer and narrower than other types of valves for bikes. The 60mm Presta valve is advantageous for the inflation of road bikes with deep-section wheels. With a brass-reinforced valve stem and secure seating, each valve is highly durable and airtight. And in the rare event of a leak, the included valve stem caps will save the day..
  • HIGH-QUALITY SHOCK-PROOF ROAD BIKE TUBES - Enjoy optimum vibration dampening and shock absorption with these thick and high-quality inner tubes. 4x thicker than average inner tubes in the market, these inner tubes provide superior comfort, reducing bone-rattling vibrations and absorbing the brunt of jump impacts..
  • EXPLOSION-PROOF INNER TUBES FOR YOUR SAFETY - An inner tube should remain dependable even when punctured. AR-PRO's line of replacement inner tubes provide may look straightforward, but they have advanced features including a built-in self-sealing property that enables the inner tubes to ....
Check Stock

2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male FPV Antenna for FPV Multicopter Racing Drone Quadcopter

  • Package Included:5x Receiver Antenna Protection Tube+5x Tube Protective Cap..
  • Suitable for FPV racing quadcopter frsky receiver 2.4g antenna line ipex4 antenna..
  • Tube:Length:15cm (5.9inch),Outside diameter:3mm.
  • Protect fragile receiver antenna.With the protection tube,you do not need worry that propeller cut down the antenna.Can be used as support and buffer for antenna..
  • It help making receiver antenna fixed proper angle to achieve best signal.Has insulation function..
Check Stock

Corning CCH-04U Closet Connector Patch Panel Housing - Holds 12 CCH Connector Panels

  • Includes mounting provisions for buffer tube fan-out kits.
  • Suitable for loose tube, tight-buffered and optical fiber ribbon cables.
  • Mounting configurations include standard 4.5-in (11.4 cm) frontal projection, partially flush and fully flush.
Check Stock

Case Club Compact AR Pistol (or SBR) Pre-Cut Waterproof Case with Silica Gel to Help Prevent Gun Rust (Upgraded Gen-2)

  • ... will fit 2 magazines stacked while the 2 cutouts in the lid will fit one each. The magazines and lower in the lid are held in place with heavy duty velcro straps and ensures nothing falls out..
  • Max Barrel Length of gun is: 10.5″ (with flash suppressor). The foam is preforated above the upper for optics and at the buffer tube location for stocks/braces. If you don’t have an optic or stock, leave the foam in place and you won’t be able to tell it was cutout..
  • The accessorry pocket in the base will accomodate a variety of small accessories and also allows room for the stock to sit in. The amount of accessories able to fit in that area will depend on the size of your stock. Case is no larger than a laptop case and won’t draw unwanted attention..
  • 4 wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states..
Check Stock

Matched Pair 7-Pin GE JAN 5654W Vacuum Tubes Upgrade for 6AK5/6J1/6Ж1/ EF95/6J1P

  • About Tube + Transistor Hybrid amplifier: Front tube amplifier and rear transistor combine the advantages of two amplifier circuits to achieve the....
  • Tube Amplifier :Adopt four 6J1 tubes for pre amp, making voice sweet and exquisite..
  • Transistor for Class-A amplifier: Adopt transistors for class A buffer, output power up to 2000mW, can easily drive many kind headphones..
  • XLR and 4. 4mm balanced input/output: It has XLR and 4.4mm balanced input, 4-pin XLR and 4.4mm balanced output, rich and diverse interfaces,....
  • Built-in Mute Circuit: It built-in relay for mute circuit when turn on amplifier to avoid POP noise and make sure the tube is worked at its best....
Check Stock

Aguilar Tone Hammer Preamp/Direct Box

  • Tube Drive with Tone Print technology emulates preamplifier and power amplifier tube stages, offering you everything from subtle drive to full-on distortion.
  • Spectra Comp control with Tone Print technology provides a variety of ultra-transparent and highly musical multi-band compression profiles to cut through any mix.
  • Intelligent EQ stack Dedicated to bass has four simple control dials to give you easy and impressive tone-shaping.
  • Balanced DI with Pre/post switch allows direct connection to mixing consoles or recording EQUIPMENT.
  • Superior analog buffering from the BONAFIDE BUFFER pedal prevents signal distortion from long cable runs.
Check Stock

2 Pack 3.00/3.50-8 Replacement Inner Tubes with TR4 Valve Stem for pneumatic wheelbarrow wheel,cart wheel, garden cart, wagons - Made From Heavy Duty, Thick Premium Rubber

  • AR-PRO offers the perfect replacement inner tube for 3.50-8'' (8'' rim size, also fit 4.00-8, 3.50-8, and 3.25-8 tire) like lawn mowers, hand trucks, wheelbarrows, yard trailers, dollies, trolleys, wagons, snow blowers, persuure washers, air compressors, generators, go carts, wood chippers and more – guaranteed fit!.
  • MADE HEAVY DUTY FROM QUALITY MATERIALS: Our Inner tubes are made from premium, 100% natural rubbers, TR4 Valve Stem. it’s our job to make dependable and durable inner tubes and we do it right! Count on AR-PRO!.
  • SAFETY FIRST IS OUR MOTTO: We designed this inner tube to be explosion proof. When and if punctured, it immediately creates an airtight seal to prevent damage, destruction and injury to the rider. Safe in any season or weather condition..
  • ADDS COMFORT TO YOUR RIDE: With thick rubber that absorbs shocks (4X thicker than other brands), you won’t feel the bumps and hollows because the vehicle will glide along, protecting one from the force. Now that’s comfortable..
  • U.S BASED CUSTOMER SERVICE: We respond to any questions or inquiries within 5 hours. Not happy with your purchase for any reason? Not a problem, our 30 Days free return/exchange policy ensure you shop with worry free..
Check Stock

Magnum Target AR500 Steel Target Dueling Tree No Weld Stand 6' Rnds Metal Shooting Hostage

  • Our durable, 3/8" AR500 interlocking paddle rings allow for smooth and consistent paddle rotation. They are more durable and wear less over time compared to tube designs..
  • This simple and sturdy bolt-together design takes just a few minutes to assemble..
  • Our 24” stand legs include cut-outs allowing you to choose your desired forward tilt angle (0-20 degrees). Each stand leg corner also includes an oval shaped hole for stakes for added stability if desired, but not necessary. Stakes not included..
  • These 3/8in. AR500 steel targets are great for most pistol and rifle rounds, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers.
  • Steel shooting targets are precision cut with a CNC plasma cutter and submersion water cooled during the cutting process to maintain the integrity of the shooting targets, ensuring the longest life. Reversible steel target face doubles the life of the shooting target.
Check Stock